How to Fix 0x800704ec Windows Defender Error?

Windows users face an issue on their Windows 10, 8.1 and 7 system which shows Publisher has Detected a Problem whenever they try to open any file Publisher.

The error occurs when a user try to access the file from externally and both of the files were created in publisher program.

If it’s the scenario with you too then you can follow the methods I have mentioned in this article to fix this error.Using Graphics Manager to hide imagesLaunch the Publisher menu.Click on the ribbon box.It is located on the upper side of the screen.After going there, choose the View option.You need to go through the checkbox linked with the Graphics Manager.After enabling the Graphics Manager option, go to the right corner of the menu list.Go through the checkbox linked with the Graphics Manager.Press on the Change picture display option.After going in the Picture Display option, change the switch to hide the pictures option.Press on the OK button to save the changes you have made.Exit from the recent Publisher menu; launch the file, which is showing the Publisher had detected a problem error on Windows.Recovering the data through the insert text featureIt is another effective method you have to fix this error on your Windows PC or laptop.

You can resolve this issue by recovering the data by the insert text feature.

To know how, follow the steps listed below:Launch the Publisher application.Make a new Blank workspace by clicking on the new option.Press on the Blank option.After creating a new file, click on the Insert option.Press on the Insert File option.Otherwise, press on the Insert Text file option.Once you are in the Insert Text file, choose the PUB file.Press on the OK button.You have transferred the content to a new folder now.Start arranging it, and after that, save the file through the Save As feature option.Launch the created file once again.Now, you need to check if the Publisher has detected a problem is fixed or not.Creating the PromptforBadFiles subkeyYou can also fix this error by creating the Prompt for bad files and to do so, follow the guidelines mentioned below:Click on the Windows and R keys together.It will launch the Run prompt box.Enter ‘regedit’ in the provided box.Click on the Enter button.It will launch the Registry Editor menu.After you get the User Account Control menu, you need to press on the Yes button.After going to the Registry Editor menu, go to the below-mentioned locations, but it depends on the version of the Publisher.Publisher 2016:                     HKEY_CURRENT_USER\Software\Microsoft\Office\16.0\PublisherPublisher 2007:                     HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\PublisherPublisher 2003:                     HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\PublisherPublisher 2002:                    HKEY_CURRENT_USER\Software\Microsoft\Office\10.0\PublisherPublisher 2000:                     HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\PublisherAfter choosing the Publisher key, click on the upper side of the menu list.Select the Edit option.Press on the New button.Click on the Dword option.After that, you need to give a title to the PromptForBadFiles.After creating the PromptForBadFile keys, you need to click twice on it.In the Edit DWORD Value menu, you need to change the Base to Hexadecimal.You need to also change the Value data to 1 before pressing on the OK button.Once you have managed to make a new file, you need to exit from the Registry Editor menu.Launch the file which is causing this issue.Edward Lewis is a creative person who has been writing blogs and articles about cyber security.

He writes about the latest updates regarding central.bitdefender.com and how it can improve the work experience of users.

We have never doubted the software program that was developed by Microsoft, and their house  Antivirus, aka Window Defender, is one of them.

However, several users haven’t disabled the services of Windows Defender.

If you are also one of those users who are facing virus related issues on your device and would like to sneak out them, then follow the below-written methods to attain the knowledge about disabling of Window Defender.

So, here are the steps to permanently turn off Windows Defender Antivirus.

Through Group Policy To launch the Run dialog box by pressing Win + R keys together on your keyboard.After that, enter ‘gpedit.msc.’ select the OK tab to launch ‘Local Group Policy Editor.’You should search the pursuing path: Computer Configuration> Administrative Templates> Windows Components> Windows Defender Antivirus.Go to ‘Turn off Windows Defender Antivirus and twice click on it on the right-hand side panel.Choose the option Enabled, and then click on the Apply button then pick the OK tab.Search: Computer Configuration> Administrative Templates> Windows Components> Windows Defender Antivirus> Real-time Protection.Reach the policy ‘Turn on behavior monitoring.’Choose the option Disabled and select the Apply tab.Click on the OK tab.Navigate to policy ‘Monitor file and program activity on your computer.’Choose Disabled and choose the Apply option then pick the OK tab.Select the policy ‘Turn on process scanning whenever real-time protection is enabled’ and twice click on it.Reach the Disabled tab and choose the Apply option then select the OK tab.Navigate to ‘Turn on behavior monitoring and twice click on it.Later, choose the Disabled tab and select the Apply option then pick the OK tab.Now, reboot the system.Through the RegistryPress Win + R keys together on your keyboard to launch the Run dialog box.Then enter ‘regedit’ then select the OK to launch the Registry.You should search the pursuing: HKEY_LOCAL_MACHINE\SOFTWARE\policies\Microsoft\Windows Defender.Navigate to Windows Defender folder, and right-click on it then choose the New and select the ‘DWORD (32-bit) Value.Input the key name ‘DisableAntiSpyware.’ Then press the Enter key.Go to the key that was freshly created and twice click on it and adjust its value to 1 from 0.Click on the OK tab.Navigate to the folder of ‘Windows Defender’, then select the ‘New’ button and press the key.Input the key name ‘Real-Time Protection’ and hit the Enter button.After that, go to the folder of ‘Real-Time Protection’ and choose the ‘New’ then click on the value of DWORD (32-bit).Rename the key named ‘DisableBehaviorMonitoring.’ Then hit the Enter button.Twice click on the freshly made key and adjust the value from 0 to 1.Press the OK button.Reach folder of ‘Real-Time Protection’ and right-click on it.Choose the New option and press the ‘DWORD (32-bit) Value’.Give a new name to the key named ‘DisableScanOnRealtimeEnable.’ Then hit the Enter button.Twice click on the freshly make key and adjust value to 1 from 0.Finally, hit on the OK key.Through the Security Center Launch ‘Windows Defender Security Center’ on the Windows 10.After that, click on the option ‘Virus and threat protection.’You should select ‘Virus and threat protection settings.’Now, disable ‘Real-time protection’ switch toggle.Richard Branson  is a technology enthusiast who loves writing about new advancements and IT threats on a regular basis.

Her work focuses on the latest advancements in the realm of technology, social media, and cyber security at norton.com/setup.

Computer viruses are a security threat and also cause several errors like “ERROR_VIRUS_INFECTED.” This error mainly followed by the “Operation did not complete successfully because the file contains a virus” notification.

In this article will show you how you can easily fix this issue with possible solutions and convenient methods: How to Fix Operation Did Not Complete SuccessfullyChange AntivirusRemoving your antivirus from your operating system is not the best fix, but it can help to fix this issue.

However, sometimes Defender causes the operation did not complete the error.To fix this issue, you need to disable Windows Defender properly on your system.Here are the steps to follow:Tap the Windows + I button on your keyboard to launch the settings application on your device.Under the Settings, select the “Update and security” option, in the left pane, move to the “Window Defender,” and then in the right pane click “Real-time Protection.”After the above process, Window Defender will turn off, and you can run your file without any issue.To completely turn off Windows Defender, you have to edit the registry.Here are the steps to follow:Tap the Windows + R button to open the run command prompt.In the Run command –line type “Regedit” and then tap the “Enter” button or tap “OK.”In the left pane you need to move on:HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defenderkey.

Locate “DisableAntiSpyware DWORD” in the right pane.

Now type “DisableAntiSpyware” as the new name of DWORD and then double-tap on it.Set the value from 0 to 1 and then click “OK” to save your changes.After the above process Windows Defender will permanently turn off, and you can’t see this error on your device again.If you don’t wish to edit your registry, you can turn off Windows Defender via “Group Policy Editor.”Here are the steps to follow:Tap the Windows + R button on your keyboard and then type “gpedit,msc.” And then, hit the “Enter” button or tap “OK.”When the Group Policy editor appears on the screen, navigate to the left pane and select “Computer Configuration” click “Administration Template” hit Windows Computer” and then click “Windows Defender.In the right pane double-tap on Disable Windows Defender.”Click the “Enable” button and then select “Apply” and hit “OK” to save your changes.Now restart your PC and check for improvement.Add Problematic File into Exclusion ListIf you are facing this error when you are trying to access any files, it is possible that there is a problematic file.

Simply add it to the Exclusion list to fix the problem.Reinstall Antivirus“Operation did not complete successfully” error may occur due to improper installation of antivirus.

In case you have a mapped network drive on your Windows 10 PC, then Windows Defender will not scan it for potential security risks.

But it is essential to make sure that it is also scanned during every routine scanning of Windows Defender to keep your system safe.For more info: Windows

If your Windows Defender causes up an error notification saying “item skip during the scan,” then the issue occurred due to an item being missed during the scan.

If you have disabled network scanning on your device, then you can also face this issue.

The application settings does not have the ability to control the scanning of your network settings.

To fix this, you might be needed to enable networking scanning on Windows Defender.How to Enable Network Scanning in Windows DefenderIn this article we will show you how you can enable network scanning in windows defender with three ways and each method will permit network scanning:PowerShellGroup PolicyRegistry EditorAll these methods are depending on which windows version you are using, and you can select one from the above methods.1) PowerShellStart PowerShell along with the admin account.Enter and confirm the command:Set-MpPreference –DisableScanningNetworkFiles 0There is no other output for this command, so you need to copy a file from your network and check you fix this error.If you wish to disable it, then you need to set it 1.2) Group PolicyHere are the steps on how to enable Network scanning in Windows Defender through Group Policy:Launch the group policy editor and the visit to Computer configuration.Tap Administrative temples.Hit Windows components.Tap Windows Defender Antivirus.Tap Scan.Double-tap “Scan network files” and then set it to “Enabled.”Tap Ok.When you have enabled this service, all network files will be scan automatically.Remember that the default setting cannot scan any network files.3) Registry EditorWhen you are using Windows Home, you can also try to check registry value in the group policy that is not available for you.Here you need to launch registry editor and move to:Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows DefenderRight-tap on “Windows Defender” and generate a folder key with the name “Scan” in the scan option.

Here you have to create a new DWORD with “DisableScanningNetworkFiles” and then set it to “0” to enable the scanning.Turn off the Registry.Next, you need to copy the file network; it will automatically scan.You can also copy the shortcut key and import it into another PC to apply rapidly.John Smith is a creative person who has been writing blogs and articles about cybersecurity.

He writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users.