logo
logo
Sign in

How to Complete the HP 123 Printer Setup for your device?

avatar
comij setup
How to Complete the HP 123 Printer Setup for your device?

With HP 123 Printer Setup, you can connect your HP printer device to the Home WiFi network. This setup wizard is available only for the selected range of HP printer model which supports the touch screen panel. So, connect your printer to the network to download and install the software and run your device for printing the documents. If you do not want the password trouble, you can choose the Wireless Protected Setup for your printing device. 

 

Below we are going to share the step by step guidelines that can help you to set up the HP printer device using the WPS method. Before you proceed with the process, it is important for you to check and make sure that the following items are with you: 

 

  • Wireless HP printing device. 
  • SSID or Network name. 
  • WEP or WPA passphrase, Network password.
  • A system having Wireless capabilities. 

 Here are the steps you need to follow:  

 

  • Turn on your printer, computer, and router. Now, you need to connect your computer to the same WiFi network to which your printer is connected. 
  • Disconnect all the Ethernet or USB cables. Open the Control Panel of your HP printer and choose the ‘Setup, Network, or Wireless’ menu. 
  • Proceed with the on-screen guidelines and complete the network connection to your printing device. 

 The WPS method lets the users connect their printing devices to the network without a password.  You can either go with the Push button method or Pin method as per your preference. The Pushbutton method is quite simpler to use than the Pin method. The following are the steps for completing this task.

 Push Button Method

Some of the printing models may also choose between the WiFi Setup wizard or the WPS method. Choose the Push button or WPS method in that scenario. 

You need to press and hold the ‘WPS’ button present on the router for 5 seconds and wait until your printing device connects to the network. 

 Pin Method

  •  
  •  Choose the Pin method from the ‘WPS’ menu when you are asked to select between the PIn method and the Push-button method. 
  • The printer you have to provide will be shown on the printer’s control panel/ 
  • Open the Router utility page and type the WPS pin. 

Your device will be connected to the internet. To download the printer driver and software, you need to visit the 123.hp.com/setup and you can get it from there. 

We hope that these simple steps will help you to complete the123 HP printer setup for your device. All the mentioned guidelines are simple and easy to follow. So, follow the instructions carefully and complete the process without any hassle. The mentioned guidelines are simple and easy to follow. But, if you still have a doubt or there is any other query, we recommend you contact the experts and seek their advice to complete the task. The experts will give you the best advice and make sure that nothing compromises your HP printing experience. 

collect
0
avatar
comij setup
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more