LogiLDA.dll missing issue

 SETUP PROCEDURE: Before setting up the HP printer, the user should perform a few certain steps as mentioned:The printer needs to be unboxed, the cables should be connected and install the ink cartridge beforehand.

Also, place the papers in the printer tray.

You can also just click on the 123.hp.com.setup file which is downloaded for launching the installer.

Deselect the USE PRINTER OFFLINE option from the menu to bring back your printer to online mode.

Search DEVICE MANAGER in the window search and make a click on it.

If one wishes to re-install their driver, they can select REMOVE PROGRAMS from the control panel and uninstall the existing printer driver.

It works just like Siri and helps in searching your computer, sending emails, setting reminders, etc.

With a single toggle you could turn off Cortana but no longer this is the case.

However, if you use Windows 10 Professional or Enterprise, you’ll need to make changes to Group Policy Editor.

For this, you can use RegClean Pro.

Also, make sure you have created a System Restore point as it will help to get back the system if anything goes wrong.

Now, navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Windows Search.

As we know, Windows defender is one of the advanced in-build antimalware software that protects your Windows operating system.

However, when a user installs any third party tool like Norton, McAfee, or more, then such an issue arises, stating, “Windows Defender 0x800704ec.” For that, here are the steps that you can use to overcome your hassles in the flick of seconds.

Make sure to pursue each instruction properly and get things done accordingly.

Turn On the Windows Defender ServicesIf you wish to turn on the Windows Defender services, then pursue the given instructions.Press Win + R keys at once on your keyboard to launch the Run dialogue box.After that, enter ‘services.msc.’ into the Run dialog box on your screen then press the Enter button.You should find Windows Defender Services on the pursuing Console and look if they are performing.When the Status column is empty, right-click on Service and choose the Start to turn on it again.Finally, reboot the system and look if the error 0x800704ec is clear now.Delete Third-Party AntivirusIf you would like to delete third-party antivirus, then abide by the given steps.To launch the Run dialogue box by pressing Win + R keys at once on your keyboard.Then enter ‘appwiz.cpl’ into the Run box and press the Enter key.On the pursuing screen, find the third-party antimalware tool which is installed in the system.Right-click on it, then choose the Uninstall option.A prompt will show up for the last verification; once more, click on the Uninstall option to delete it.Through Registry EditorIf you wish to fix the error through registry editor, then pursue the given instructions.You have to enter ‘regedit’ within the Taskbar search section, and if the result appears to see, hit the Enter key.A UAC (User Account Control) will pop-up, click on the Yes to provide corroboration.After showing up the Registry Editor wizard, go to the pursuing path through the left column: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender.Go to the right-hand side panel and find the value with ‘REG_DWORD’ Enter and twice click on it.Now, reach the Edit string, set the value 0 in the Value Data section, and select the OK to apply the changes.Alter the Settings of Group PolicyIf you would like to alter the settings of group policy, then abide by the given steps.Go to the Start tab and right-click on it, then choose the Run option.You should enter ‘gpedit.msc.’ into the Run dialogue box and press the Enter key.Here you will see ‘Local Group Policy Editor’ Wizard.

Go to the pursuing path through the left column: “Computer Configuration >Administrative Templates >Windows Components.”Find the Windows Defender Antivirus and right-click on it.Move to the right-hand side panel.

Either run a twice click on ‘Turn off Windows Defender Antivirus or right-click on it, then choose the Edit option.On the pursuing wizard, choose the radio tab of ‘Not Configured,’ and after that, select the Apply and choose the OK to apply the changes.Richard Branson is a self-professed security expert; he has been making the people aware of the security threats.

Computer viruses are a security threat and also cause several errors like “ERROR_VIRUS_INFECTED.” This error mainly followed by the “Operation did not complete successfully because the file contains a virus” notification.

In this article will show you how you can easily fix this issue with possible solutions and convenient methods: How to Fix Operation Did Not Complete SuccessfullyChange AntivirusRemoving your antivirus from your operating system is not the best fix, but it can help to fix this issue.

However, sometimes Defender causes the operation did not complete the error.To fix this issue, you need to disable Windows Defender properly on your system.Here are the steps to follow:Tap the Windows + I button on your keyboard to launch the settings application on your device.Under the Settings, select the “Update and security” option, in the left pane, move to the “Window Defender,” and then in the right pane click “Real-time Protection.”After the above process, Window Defender will turn off, and you can run your file without any issue.To completely turn off Windows Defender, you have to edit the registry.Here are the steps to follow:Tap the Windows + R button to open the run command prompt.In the Run command –line type “Regedit” and then tap the “Enter” button or tap “OK.”In the left pane you need to move on:HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defenderkey.

Locate “DisableAntiSpyware DWORD” in the right pane.

Now type “DisableAntiSpyware” as the new name of DWORD and then double-tap on it.Set the value from 0 to 1 and then click “OK” to save your changes.After the above process Windows Defender will permanently turn off, and you can’t see this error on your device again.If you don’t wish to edit your registry, you can turn off Windows Defender via “Group Policy Editor.”Here are the steps to follow:Tap the Windows + R button on your keyboard and then type “gpedit,msc.” And then, hit the “Enter” button or tap “OK.”When the Group Policy editor appears on the screen, navigate to the left pane and select “Computer Configuration” click “Administration Template” hit Windows Computer” and then click “Windows Defender.In the right pane double-tap on Disable Windows Defender.”Click the “Enable” button and then select “Apply” and hit “OK” to save your changes.Now restart your PC and check for improvement.Add Problematic File into Exclusion ListIf you are facing this error when you are trying to access any files, it is possible that there is a problematic file.

Simply add it to the Exclusion list to fix the problem.Reinstall Antivirus“Operation did not complete successfully” error may occur due to improper installation of antivirus.

It also gives you a random solution to log out from your account first and then get into your account by signing in.

Then navigate to the “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList.”

Now search for the folder with ProfileImagePath indicating to c: users.

After that, you have to reboot your system and then sign in with an activated user account.

Now, the directory storage location through a text will present on your display which reads: C:\Users\(Your User)\documents.

Now, Sign out from your existing account and then re-log into your issue, creating an account.

Are you searching for the printer repair technicians to work out your Half Page printing issue?

Then, read this blog which enables you to resolve the problems by yourself.The printer consumers of New Jersey have been experiencing the printer error and don't know the way to fix the printer drawback.

Then for them all, we've mentioned the printer troubleshooting measures to correct the printer problems.

The purchasers also can take their printer to the best hp printer repair near meor any other brand repair shop to solve half-page printing problem.

To create our several works easier and saves a lot of time.

The usage of printers has widely increased these days for the business function and their private usage.However, if any user encounters half-page printing Difficulty whilst printing the urgent documents, then, he doesn't need to worry anymore.

When a Windows 10 user tries to remove the Windows 10 profile, he might get a ‘Profile not deleted completely’ error.

This specific error is complained about on all Windows 10 editions.

If you are also struggling with this error, you can follow these resolutions provided below.Turn off Windows SearchTo turn off Windows search, pursue these on-screen instructions mentioned below:To launch the Run accessory, use the Win and R keys combination over the keyboard.After that, insert ‘services.msc’ in the Run box and select the OK button.Once you get a UAC (User Account Control) pop-up, hit the Yes button.After going to the Services window, move on to the right side and go down via the available services list until you find the Windows Search see If service.Once you manage to find the right service listing, right-click on it, then select the ‘Stop’ button via the context menu.After stopping the service successfully, launch the Run accessory by pursuing the above steps.Then insert ‘SystemPropertiesAdvanced’ and hit the Enter button to invoke the System Properties window.You should enter the Advanced tab via the upper menu and select the Settings option related to the User Profiles.After going to the User Profile menu, choose the profile you would like to get rid of and hit the Delete option and verify the method to delete it properly.10.Once you have managed to delete the suspicious Windows profile without facing the exact ‘Profile not deleted completely’ error.

Hold the Win and R buttons simultaneously to launch another Run pop-up.11.Afterward, insert ‘services.msc’ into it and select the OK button to launch the Services window.

Once you see the UAC (User Account Control) prompt, press the Yes button.12.Once you returned successfully to the Services window, find the Windows Search service again via the right-side section, enable it again by right-clicking on it, and then select the Start button.Remove the Leftover Registry KeysTo remove the leftover registry keys, pursue these on-screen instructions mentioned below:To open the File Explorer, use the Win and E buttons simultaneously on the keyboard.Then go to the C:\Users folder and click on it.Then, find the folder named once the folder you would like to get rid of.Once you get it, right-click on the right folder and hit the Delete button via the context menu.Open the Run prompt by using Win and R keys altogether on your keyboard.Then insert ‘regedit’ into it and hit the OK button to bring up the Registry Editor screen.You will get a UAC (User Account Control) pop-up and then click on the Yes button.After that, utilize the left pane menu to enter the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileListBeneath the ProfileList section, you will see the keys series-parallel to a Windows Profile.

The job is to enter each entry and look at the ‘ProfileImagePath’ data related to it.10.After managing to detect the right ProfileList key that includes remnants of profile data, right-click on it, then pick the Delete button.11.Now, reboot the system.Remove the Unknown AccountTo remove the unknown account, pursue these on-screen instructions mentioned below:Invoke the Run accessory by using Win and R buttons simultaneously on your keyboard.Once it opens, insert ‘sysdm.cpl’ in it and hit the OK button.After launching the ‘System Properties’ window, select the ‘Advanced’ tab, then choose the Settings option related to the User Profiles.After getting UAC (User Account Control) pop-up, press the Yes button.Go to the User Profiles menu, choose the ‘Account Unknown‘ profile, and then hit the Delete button.Finally, reboot the system and check the issue.Ella johnson has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry.

In case you are having this problem, then there are many ways to fix it.

Here’s how to fix the media streaming problem in Windows 10.Source : http://sitemcafee.com/blog/how-to-fix-media-streaming-problem-in-windows-10/Steps for Fixing Missing Media Feature Pack   Open the ‘Turn Windows features on or off” checkbox.

You have to make a Windows Registry key.You have to go through the steps mentioned below to complete this procedure:   Click on the Windows symbol and R keys together on the system keyboard for opening the Run pop-up box.

Tap on the Enter option given on the system keyboard for opening the Windows Features pop-up menu.

Go to the Media Features located in the window below the “Turn Windows features on or off” option.

In case the Registry  Editor is not used in a correct way, then this will severely damage the computer which will ask you to reinstall the version of Windows.Once you have made a Windows Registry key, go through the steps mentioned below to start editing the Windows registry:   Go to the Run pop-up menu by clicking on the Windows symbol and R keys together on the system keyboard.

1) Create Windows Restore PointHere are the steps on how to create windows restore point to fix Windows 10 Installation Upgrade Error 0xC1900101 – 0x20017:Tap and Hold Win + R key together.Then enter the following command given below:exeHit on the Create and enter the title of your restore point.Tap OK to confirm your creation.

2) Disabling wireless from BIOSHere are the steps on how to disable wireless from BIOS to fix Windows 10 Installation Upgrade Error 0xC1900101 – 0x20017:Restart your computer.While the boot tap, F2 or del button continuously to enter BIOS.Visit the Advance tab when that it did.Move to the Wireless section and tap on the Enter to start it.When two “internal Bluetooth and Internal WLAN” button appear or disable.Tap Esc key on the keyboard and return to the main display to save the change.

3) Reinstall or Update  DriversHere are the steps on how to update or reinstall drivers to fix Windows 10 Installation Upgrade Error 0xC1900101 – 0x20017:Tap Windows key on your keyboard and enter “Device Manager.”Tap on the search result and find the malfunctioning drivers.It can be a label with a yellow exclamation sign, visit the list on your device and check one by one, all of them.Choose Driver and Tap on the Update Driver option.Reboot your system.

4) Uninstall Broadcom Bluetooth and Wireless drivers If you have operating Windows 7 or Windows 8.1 operating system, then the culprit might be Wireless drivers and Broadcom Bluetooth.Here are the steps on how to uninstall wireless drivers and Broadcom Bluetooth to fix Windows 10 Installation Upgrade Error 0xC1900101 – 0x20017:Visit the Start and enter Device Manager in the quest box.Tap on the search list and attain “Bluetooth driver.”Right-tap on Bluetooth driver and choose Uninstall.After that, search and right-tap on “Wireless network driver” and choose Uninstall.Again Reboot your system and attempt to install the update.

5) Restart Windows Update componentHere are the steps on how to restart Windows update component to fix Windows 10 Installation Upgrade Error 0xC1900101 – 0x20017:Tap Win+X key together and choose “Command Prompt.”Disable BITS, Windows Update Services Cryptographic, and MSI Installer.To start, type the command on the prompt and tap Enter button on each of them as net stop bits net stop cryptSvc, net stop wuauserv, and net stop msiserver.Now type the command to rename ” SoftwareDistribution” and “Cartoot2 solders, and remember to Enter after each command as follow:C:\\Windows\\SoftwareDistribution SoftwareDistribution.old and renC:\\Windows\\System32\\catroot2 Catroot2.oldWhen you have done, enable BITS, Windows Update Services Cryptographic, and MSI Installer service.The given command can do this by Entering one by one: net stop bits net stop cryptSvc, net stop wuauserv, and net stop msiserver.Now close the Command Prompt and restart your computer.

Printers have shaped up to be one of the most useful electronic devices, but it has some errors as well.

One such malfunction is printer sending job notifications.

Anyone facing it on their system should read the blog.

So, here are the instructions to solve the error.Sources :- How to Fix Printer Sending Job Notification Error on Windows 10?

, Brother printers support Upgrade USB DriversIn case you intend to upgrade the USB drivers, then you can opt to follow the below-mentioned guidelines.Hold the Win + R keys at the same time on your system to launch the Run section.After that, input ‘devmgmt.msc’ into it and hit the Enter key to launch the Device Manager.Go to the Device Manager and spread out the Universal Serial Bus Controllers section.You should locate the USB port driver and choose the Update Driver option.Reach the next screen and choose the option ‘Search automatically for updated drivers software.’Windows will start the scan process for an upgraded version of the driver and install it itself.You should shut the Device Manager and reboot the printer.Upgrade Printer DriverIf the users are trying to upgrade the printer driver, then they should carefully apply the given steps.Don’t forget to install the newest printer drivers for the printer.Now, you should download the newest version of the printer driver from the site of the manufacturer.Reboot Print Spooler ServiceIn case you intend to reboot print spooler service, then you can opt to follow the below-mentioned guidelines.Hold the Win + R keys at the same time on your system to launch the Run section.After that, input ‘services.msc’ into it and hit the Enter key to launch the Services.Go to the Services screen and find the Print Spooler service.Reach the Print Spooler, and right-click on it, then choose the Properties option.Navigate to the Properties screen, select the Stop button.It will prevent the print queue procedure.Don’t close the ‘Print Spooler Properties’ screen launch.Launch the File Explorer and go to the pursuing location: C:\WINDOWS\system32\spool\PRINTERS.You should remove all the files in the folder of Printers.In case you don’t view any files, select the View section, and mark the “Hidden Items.”Now, shut the File Explorer screen.Go to the Print Spooler Properties screen, select the Start option to reboot the service.Finally, shut the Service screen and attempt printing once more.Launch Printer TroubleshooterIf the users are trying to launch the printer troubleshooter, then they should carefully apply the given steps.Go to the Start menu on your system.Thereafter, you should click on the Settings option.Then select the Troubleshooter section.You have to move down and select the Printers option.Later, select ‘Run the troubleshooter.’Now, pursue the on-screen steps and save any suggested fixes.Reset the PrinterIn case you intend to reset the printer, then you can opt to follow the below-mentioned guidelines.You have to switch off the printer.After that, disconnect the power cord from the AC power.Then leave the printer still for a while.You should long-press the power key.During pressing the power key to attach the power cord to the AC power.Leave the power key when the printer reboots.Finally, attempt printing and look at whether the error is solved.Abigail Smith is an inventive person who has been doing intensive research in particular topics and writing blogs and articles on Brother printer support and many other related topics.

He is a very knowledgeable person with lots of experience.

Fortunately, you can easily find a working solution to troubleshoot this problem.

Many users have reported the configuration problem while trying to print the documents using their printer saying that error code 0x8007007e appears on their screen with the message stating that an unexpected configuration issue has occurred.

If you are also facing the same trouble with your device and looking for a reliable solution, this post can help you.

Here we are going to share some simple and easy troubleshooting steps to troubleshoot printer error 0x8007007e on your computer.

Troubleshoot error code 0x8007007e with  easy methodsTroubleshooting Method 1 -  copy and replace the printconfig.dllOpen window explorer on your computer and navigate 'C:\Windows\System32\spool\drivers\'.

You are likely to see the multiple results on your screen; find the  thex64 DLL file.Now you need to right-click on 'printconfig.dll'  and select the 'copy' option.Go to the ' C:\Windows\System32\spool\drivers\x64\3'.You have to right-click on the folder and then select the 'Paste' option.

Updating windows is one of the vital things required in the system.

It helps our system by providing the latest features; fix the bugs as well as security patches.

However, while performing the update in Windows 10, the user may find that things are not working correctly.

The error code 0x8007007e has been encountered by numerous people while upgrading the system.

Some of them are:Interference of third party applications like antivirus.Corrupt registrySoftware conflictCorrupted system filesYou will get a message on your screen “Failed to install the update” or “Windows has encountered an unknown error” due to these reasons.Five Methods to Fix the Error Code 0x8007007eTo overcome Windows error code 0x8007007e, you can try the following effective methods:1.

Disable Third-Party Antivirus and Windows Firewall:Go to the windows Cortana search box.Type Control Panel and tap on the best match.Afterward, choose the System and Security.Then go to the Windows Defender Firewall (Windows Firewall.

If you are facing the issue as well, then read through the blog to fix it.

So, here are the steps to fix x800c0002 error while updating Windows 10.Launch Windows Update TroubleshooterAfter installing when you launch it, identify the issue, and solve it.

However, not all issues should be able to resolve with this software.

When it does not guide, you should take the second process.Reset Windows Update ComponentsIn case you intend to reset Windows update components,’ then go through the below-mentioned steps.You should select Win + X keys.

From the menu, select Command Prompt.You must prevent the BITS, MSI Installer, Cryptographic, and the Windows Update Services by running these commands to the command pop-up.

Remember to press the Enter key after every command: net stop wuauservnet stop cryptSvcnet stop bitsnet stop msiserverThe next needs further SoftwareDistribution and Catroot2 folders with the command pop-up.

While updating your Windows 10 operating system to the latest version, you might face certain issues such as Windows update cannot check for current updates.

This error occurs on your device because of several reasons.

In this article, we will show you how you can fix this issue on your device with easy steps.Edit RegistryHere are the steps on how to edit the registry:Tap Windows+ R hotkey on your keyboard and in the search tab type “Regedit” and then tap “Enter button or tap “OK.”When the registry editor launches, move to the command “Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update in the left pane.”Right-tap on “Auto-update” and then select “Export” in the dropdown menu.Here you can enter your desired name for File, select save location, and then tap on “Save” option.In this situation, if anything goes incorrect while modification, then you need to run this File to restore it.Here you need to enable the “Auto Updates” button that appears in the left pane, here you need to search for the “Reboot required” button.If it is available “Reboot required” then right-tap on it and then select “Delete” in the dropdown menu.Now tap “Yes” on the configuration dialogues that appear on your screen.Make Sure Time and Date CorrectIf you are receiving Windows updates cannot check current updates, notification on your device while updating Windows10.

Might be this issue occurs due to your incorrect time and date or problem with date and time on your operating system.Here are the steps on how to check time and date correct on your device:Right-tap on the clock symbol on your “Taskbar” and then select the “Adjust time and date” button on the dropdown menu.Now find the “set time automatically” button and disable this feature.

Now wait for a couple of minutes and then turn on features again.After the above process, you need to reboot your operating system and then try to update your Windows or check for improvement.Necessary Service Running On Your DeviceHere are the steps on how to check necessary service running on your device:Click Windows+ R key on your keyboard and then type “service.msc” in the search tab and then tap”Enter “ button on your keyboard or tap “OK.”In the service windows, find “background intelligent transfer service” and the double-tap on it to view Properties.Set Automatic from “startup type” and then tap “Apply” and hit “OK” to save your changes.Double-tap on “Windows Updates” and then change to startup type from automatic.After the above process, you need to start Windows service and “Back intelligent Transfer” service.Delete Windows Corrupted FileHere are the steps on how to delete Windows corrupted File:Launch the File Explorer and move to “C:\Windows\SoftwareDistribution\DataStore\Logs” directory.Fine “edb.log” files and then delete or rename it.Here are the steps on how to delete or rename files:Click Windows + I hotkey to launch the settings application.In the settings option tap on “Updates and security.”Click “Recovery” features in the right hand and then tap on “Restart now” option.Here you can view a list where you need to select Troubleshoot, hit advanced option and then hit Startup settings.Now you need to click on the “Restart” option.Here you will see a list appear on your screen with several options.

Tap on the safe mode version that you wish to use by tapping on the appropriate buttons.Reset Windows Updates ToolsHere are the steps on how to reset Window updates tools:Tap Windows and x key to launch a command prompt as administrator.