Are you struggling with linkssysmartwifi.com not working? If you are having issues with the linksys router login, you can check out the troubleshooting tips. Follow easy and simple steps to troubleshoot linksys router login.
Steps to Configure Linksys Smart Wi-fi Login :
- If your router came with external antennas, connect the antennas to the router first and then plug in the router to a power source. If your router has a power switch, make sure that the power switch is set to the | (ON) position. Wait until the power light indicator is solid.
- Connect the ethernet cable from your modem to the Internet port of the router.
- Connect to your secured Wi-Fi. You can locate the Wi-Fi credentials either at the bottom of the router or on the Quick Start Guide. To prevent any problems during setup, make sure you have a good signal from the router by bringing the computer closer to it or moving the computer in the same room as the router.
- Launch your web browser and enter "http://linksyssmartwifi.com" in the Address bar then press Enter. If you are unable to launch the Smart Setup, you can enter the default IP address of the router, 192.168.1.1, or type myrouter.local in the browser's Address bar.
- Tick the checkbox beside I have read and accepted the License Terms for using this software then click Next to proceed.
- In the Updates for your router window, the Install future router updates automatically (recommended) is checked by default to allow automatic updates. You can uncheck it to control when to perform an Auto-Update. You can also enable this option again after you log into the router's web-based setup page. Click Next to proceed.
- Enter your desired Wi-Fi Name and Wi-Fi Password in the fields provided, and then click Next.
- Connect to the new Wi-Fi Name then return to setup and click Next.
- Enter a router password in the Create a router password field then click Next.
- If you see the Your router is set up! message, this means that your router is now successfully set up. The new Wi-Fi settings as well as the router admin password will be displayed. Make sure to write down the new settings on the Quick Start Guide for future reference. Click Next to complete the entire setup.
- You will be redirected to the Create Your Linksys Smart Wi-Fi Account page.
You have now successfully set up your Linksys Smart Wi-Fi Router using the Smart Setup Wizard.
Open a web browser and then type http://linksyssmartwifi.com/ and hit enter.
Enter the email address and password in the Linksys router login page and click on login button.
The home page of your router appears and also you will see various tools.
You can customize these tools according to your usage.
www.linksyssmartwifi.com is the default web address to access web interface of Linksys Smart Wi-Fi routers.
Are you trying to attempt the linksys router setup?
If yes, then you can take our help.
Setting up Linksys routers can be done using the web address linkyssmartwifi.com.
make sure your computer is connected to the linksys network with wired or wireless connection.
Open up a Browser and navigate to linksyssmartwifi.com web address in the address bar.
You will get into Linksys router login page.
Facing slow WiFi or No internet error on your Android or Mac device.
If your Linksys router keeps disconnecting from network connection or keeps dropping internet.
Looking for easy way to reconnect.
Then refer this guide for linksyssmartwifi.com to fix fluctuating WiFi error.Refer guide:Linksys Router Keeps Dropping Internet
Why would i would like to see the status of my router?
Your router status tells you whether you've got a secure Internet connection and informs you about the status of your network-connected devices.To check your router status:Log into Linksys Smart Wi-Fi or myrouter.localUnder Router Settings, click Troubleshooting.Click the Status tab.
your router status is displayed here.to look at an inventory of connected network devices, click Devices.
to look at a fullreport of your router status, click Report.Click okay to close the screen.
They are:1. confirm the modem is functioning fine.2.
confirm you possess enough Ethernet wires.3.
Connect the personal computer to the WLAN port of the modem.
confirm the connections are made properly on both ends.myrouter.local3.
The router will recognize the name and redirect you to the login page automatically.
After you've got logged in to the router, the setup page will appear.
