Sachiya Steel International is one of the pioneer trader & dealer for high quality Brass Socket Weld Fittings, where too little carbon content leaves (pure) iron quite soft, ductile, and weak. Brass Socket Weld Elbow Fittings is also distinguishable from wrought iron (now largely obsolete), which may contain a small amount of carbon but large amounts of slag. Carbon contents higher than those of Brass Socket Weld Tee Fittings make an alloy, commonly called pig iron that is brittle (not malleable).
While iron alloyed with carbon is called carbon steel, Brass Socket Weld Cap Fittings is steel to which other alloying elements have been intentionally added to modify the characteristics of steel. Common alloying elements of Brass Socket Weld Coupling Fittings include: manganese, nickel, chromium, molybdenum, boron, titanium, vanadium, tungsten, cobalt, and niobium.
Additional elements are also important in Brass Socket Weld Cross Fittings: phosphorus, Sulphur, silicon, and traces of oxygen, nitrogen, and copper, that are most frequently considered undesirable. With modern steelmaking techniques such as powder metal forming in Brass Socket Weld Union Fittings, it is possible to make very high – carbon (and other alloy material) steels, but such are not common. Brass Socket Weld Plug Fittings is not malleable even when hot, but it can be formed by casting as it has a lower melting point than steel and good castability properties.
Brass Socket weld Fittings Specifications |
||
| Specifications | : | ASTM B62 & ASME B62 |
| Size | : | 1/8” NB to 4” NB (Socket weld & Screwed-Threaded) |
| Standards |
: | ASME 16.15, MSS SP-79, 83, 95, 97, BS 3799 |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Type | : | Socket weld Fittings |
| Brass | Cu | Fe | Pb | Zn |
| Min./Max. | 60.0-63.0 | 0.35 | 2.5-3.0 | Rem. |
| Nominal | 61.5 | – | 2.7 | 35.4 |
| Properties | US Customary |
| Melting Point -Liquidus | 1650 F |
| Melting Point -Solidus | 1630 F |
| Density | 0.307 lb/in3at 68 F |
| Electrical Resistivity | 39.90 ohms – cmil/ft @ 68 F |
| Electrical Conductivity | 26 %IACS @ 68 F |
| Thermal Conductivity | 67 Btu · ft/(hr · ft2·oF)at 68F |
| Modulas of Elasticity in Tension | 14000 ksi |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is a Leading Manufacture And Exporter of Alloy Steel F1 Threaded Forged Fittings, which are designed for high hardness and at times other properties are to some degree compromised.
The dual stabilization in these Alloy Steel F1 Forged Threaded Elbow Fittings prevents carbide sensitization during welding and high temperature exposure, and makes the alloy non harden able by heat treatment.
Most compositions of our Alloy Steel F1 Forged Threaded Tee Fittings include molybdenum; some, aluminum or titanium.
Corrosion resistance in these Alloy Steel F1 Forged Threaded Cross Fittings is lower than the common austenitic grades.As a result, useful operating range of our Alloy Steel F1 Forged Threaded Cap Fittings is limited by their loss of ductility at sub – zero temperatures and loss of strength by over – tempering at elevated temperatures.
These Alloy Steel F1 Forged Threaded Bend Fittings may not to be confused with AISI grade and air hardening alloy tool steel containing about 5 % chromium.Alloy Steel F1 Threaded Forged Fittings | Alloy Steel F1 Threaded Forged Fittings | Alloy Steel F1 Threaded Forged Fittings | Alloy Steel F1 Threaded Forged Fittings | Alloy Steel F1 Threaded Forged Fittings | Alloy Steel F1 Threaded Forged Fittings | Alloy Steel F1 Threaded Forged FittingsA typical composition of 18 % chromium and 10 % nickel in our Alloy Steel F1 Forged Threaded Coupling Fittings, commonly known as 18 / 10 alloy, is often used in cutlery and high – quality cookware.
The second most common austenite steel is these Alloy Steel F1 Forged Threaded Union Fittings, also referred to as excellent alloy and called as marine grade alloy, used primarily for its increased resistance to corrosion.Alloy Steel F1 Threaded Forged Fittings SpecificationsSpecifications:ASTM A182 & ASME SA182Size:1/2″ NB TO 48″ NB.Standards:ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799Class:2000 LBS, 3000 LBS, 6000 LBS, 9000 LBSType:Threaded Forged FittingsAlloy Steel F1 Threaded Forged Fittings Chemical CompositionGradeCMnSiSPCrMoAlloy Steel F10.15 max0.3-0.60.50.030.034-60.44-0.65Alloy Steel Grade F1 Threaded Forged Fitting Mechanical PropertiesTensile StrengthYield Strength (0.2%Offset)Elongation27548520 %Alloy Steel F1 Threaded Forged Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
Sachiya Steel International is a known Manufacture and Exporter of Carbon Steel A105 Threaded Forged Fittings, which is characterized by very good resistance in chloride containing media.
Electric arc welding processes is suitable for ASTM A105 Carbon Steel Forged Threaded Elbow Fittings, though oxyacetylene welding is not recommended due to the possibility of carbon pick up in the weld area.
ASME SA 105 Carbon Steel Forged Threaded Tee Fittings is corrosion resistant austenitic – ferrite steel for applications where conventional grades do not meet the corrosion requirements.ASTM A105 Carbon Steel Forged Threaded Cross Fittings is especially designed for service in aggressive chloride – containing environments and has additions of W and Cu compared to other steels.
ASME SA 105 Carbon Steel Forged Threaded Cap Fittings has very good resistance to localized corrosion and stress corrosion cracking in combination with high mechanical strength.
ASTM A105 Carbon Steel Forged Threaded Bend Fittings tightly controls the chemistry and production in strict accordance with the requirements of our in-house specifications which are tighter than standard ASTM specifications.Carbon Steel A105 Threaded Forged Fittings | Carbon Steel A105 Threaded Forged Fittings | Carbon Steel A105 Threaded Forged Fittings | Carbon Steel A105 Threaded Forged Fittings | Carbon Steel A105 Threaded Forged Fittings | Carbon Steel A105 Threaded Forged Fittings | Carbon Steel A105 Threaded Forged FittingsSachiya Steel International is one of the well – known stockiest and trader of ASME SA 105 Carbon Steel Forged Threaded Coupling Fittings, where welding procedures are similar to those applied for such conventional steel.
This ensures a consistent quality product of ASTM A105 Carbon Steel Forged Threaded Union Fittings is produced with optimal corrosion resistance and chirpy impact toughness.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Cupro Nickel 70 Tube to Male Fittings, which contain a unique summary of data relating to the physical and mechanical properties of the materials and low, ambient and elevated temperatures which is not available elsewhere.
The alloying elements in Copper Nickel 70 / 30 Tube Fittings do not get homogenized even by repeated thermal and mechanical treatments.
Available in various sizes, thicknesses and specifications, Copper Nickel 70 / 30 Compression Fittings are largely used in various industries.Copper Nickel 70 / 30 Male Connector Fittings are amongst the most necessary materials needed to provide the means to keep homes, commerce and industry running.
Backed by latest technologies and dexterous workforce, we are able to manufacture, supply and export an impeccable gamut of Copper Nickel 70 / 30 Ferrule Fittings, which is also available in customized sizes and shapes for our esteemed clients.We are one of the leading manufacturers, exporters and suppliers of a premium quality assortment of Copper Nickel 70 / 30 Double Ferrule Fittings, is stronger than the more common copper nickel 70/30 and is able to withstand corrosion at higher velocities in marine applications, making it the favorable choice in submarine systems.
In desalination plants, Copper Nickel 70 / 30 Compression Tube Fittings are used in brine heaters, heat rejection and recovery, and in evaporator tubing.Cupro Nickel 70/30 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Nickel, 300/1000/3000PSI for Brass Cu-Ni 70/30 Tube To Male Fittings Chemical Composition GradeCuMnPbNiFeZnCupro Nickel 70/3065 min1.0 max0.05 max29-33 max0.4-1.0 max1 max Cupro Nickel 70/30 Tube To Male Fittings Mechanical Properties DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation0.323 lb/in3 at 68 F2260 F50000 psi20000 psi30 % Equivalent Grades for 70/30 Cupro Nickel Ferrule Fitting Tube To Male Fittings STANDARDWERKSTOFF NR.UNSCupro Nickel 70/302.0882C71500 Cu-Ni 70/30 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry About Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.Email: [email protected] For More Information Visit Our Website: Sachiya Steel International
Sachiya Steel International is one of the leading Manufacturer and Exporter of Cupro Nickel 70 Tube to Male Fittings, which contain a unique summary of data relating to the physical and mechanical properties of the materials and low, ambient and elevated temperatures which is not available elsewhere.
The alloying elements in Copper Nickel 70 / 30 Tube Fittings do not get homogenized even by repeated thermal and mechanical treatments.
Available in various sizes, thicknesses and specifications, Copper Nickel 70 / 30 Compression Fittings are largely used in various industries.Copper Nickel 70 / 30 Male Connector Fittings are amongst the most necessary materials needed to provide the means to keep homes, commerce and industry running.
Backed by latest technologies and dexterous workforce, we are able to manufacture, supply and export an impeccable gamut of Copper Nickel 70 / 30 Ferrule Fittings, which is also available in customized sizes and shapes for our esteemed clients.Cupro Nickel 70 Tube to Male Fittings | Cupro Nickel 70 Tube to Male Fittings | Cupro Nickel 70 Tube to Male Fittings | Cupro Nickel 70 Tube to Male Fittings | Cupro Nickel 70 Tube to Male Fittings | Cupro Nickel 70 Tube to Male Fittings | Cupro Nickel 70 Tube to Male Fittings | Cupro Nickel 70 Tube to Male FittingsWe are one of the leading manufacturers, exporters and suppliers of a premium quality assortment of Copper Nickel 70 / 30 Double Ferrule Fittings, is stronger than the more common copper nickel 70/30 and is able to withstand corrosion at higher velocities in marine applications, making it the favorable choice in submarine systems.
In desalination plants, Copper Nickel 70 / 30 Compression Tube Fittings are used in brine heaters, heat rejection and recovery, and in evaporator tubing.Cupro Nickel 70/30 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Nickel, 300/1000/3000PSI for BrassCu-Ni 70/30 Tube To Male Fittings Chemical CompositionGradeCuMnPbNiFeZnCupro Nickel 70/3065 min1.0 max0.05 max29-33 max0.4-1.0 max1 maxCupro Nickel 70/30 Tube To Male Fittings Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation0.323 lb/in3 at 68 F2260 F50000 psi20000 psi30 %Equivalent Grades for 70/30 Cupro Nickel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSCupro Nickel 70/302.0882C71500Cu-Ni 70/30 Tube To Male Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.Email: [email protected] More Information Visit Our Website : Sachiya Sheet Plates
Sachiya Steel International is one of the pioneer Manufacture and Exporter for Stainless Steel 310 Tube to Female Pipes, which are either placed into the ladle before tapping or are injected into the tapping stream.
The carrying out of metallurgical reactions in Stainless Steel 310 Tube Fittings is a common practice in practically all steelmaking shops, because it is cost – efficient to operate the primary furnace as a high – speed melted and to adjust the final chemical composition and temperature of the steel after tapping.Also, certain metallurgical reactions in Stainless Steel 310S Compression Tube Fittings, for reasons of equipment design and operation, are more efficiently performed in the ladle.
The simplest form of treatment in Stainless Steel 310 Female Fittings takes place when the mixing effect of the tapping stream is used to add deoxidizers, slag formers, and small amounts of alloying agents.Stainless Steel 310 Tube to Female Pipes | Stainless Steel 310 Tube to Female Pipes | Stainless Steel 310 Tube to Female Pipes | Stainless Steel 310 Tube to Female Pipes | Stainless Steel 310 Tube to Female Pipes | Stainless Steel 310 Tube to Female Pipes | Stainless Steel 310 Tube to Female Pipes | Stainless Steel 310 Tube to Female PipesDe – oxidation reactions carried out in Stainless Steel 310S Ferrule Tube Fittings are exothermic and thus raise the temperature of the liquid steel.
Stainless Steel 310 Double Ferrule Tube Fittings also loses heat by radiation from the top surface, by heating of the ladle lining, and by heat flux through the lining and shell.
Temperature in these SS 310S Female Tube Fittings drops that take place when just holding the steel can range from 0.3 Degree C to 2 Degree C per minute.Stainless Steel 310S Tube to Female Pipes SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for Brass 310 Stainless Steel Tube to Female Pipes Fitting Chemical Composition GradeCMnSiPSCrMoNiN310min.–––––24.0–19.0–max.0.252.01.500.0450.03026.022.0– Stainless Steel 310 – 310S Tube to Female Pipes Fitting Mechanical Properties GradeTensile Strength (MPa) minYield Strength 0.2% Proof (MPa) minElongation (% in 50mm) minHardnessRockwell B (HR B) maxBrinell (HB) max310 – 310S5152054095217 Stainless Steel 310 – 310S Tube to Female Pipes Fitting Physical Properties GradeDensity (kg/m3)Elastic Modulus (GPa)Mean Coefficient of Thermal Expansion (m/m/0C)Thermal Conductivity (W/m.K)Specific Heat 0-1000C (J/kg.K)Electrical Resistivity (n.m)0-1000C0-3150C0-5380Cat 1000Cat 5000C310 – 310S775020015.916.217.014.218.7500720 Equivalent Grades for 310 – 310S Stainless Steel Tube to Female Pipes Fitting GradeUNS NoOld BritishEuronormSwedish SSJapanese JISBSEnNoName310 – 310SS31000/S31008––1.4841/1.4845––SUS 310 – 310S SS 310/310S Tube to Female Pipes Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
