Carbon Steel AISI 1018 Angle Manufacture

Sachiya Steel International is a prominent leader in exporting and supplying Carbon Steel AISI 1018 Angle Other Carbon Steel Products, which is particularly resistant to hydrochloric and hydrofluoric acids when they are de – aerated.

This AISI 1018 Carbon Steel Angle has a low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress – corrosion cracking in most freshwaters.

The resistance to a variety of corrosive conditions in our AISI 1018 Carbon Steel C-Channel led to its wide use in marine applications and other non – oxidizing chloride solutions.As would be expected from its high copper content, this AISI 1018 Carbon Steel Chain is rapidly attacked by nitric acid and ammonia systems.

This type of failure in our AISI 1018 Carbon Steel I-Beam is generally associated by means of an environment containing chlorides as well as with stress, water, dissolved oxygen, and other factors.

The tendency of austenitic alloys to crack trans – granularly in chloride solutions decreases as the nickel content of our AISI 1018 Carbon Steel H-Beam is increased.Carbon Steel AISI 1018 Angle | Carbon Steel AISI 1018 Angle | Carbon Steel AISI 1018 Angle | Carbon Steel AISI 1018 Angle | Carbon Steel AISI 1018 Angle | Carbon Steel AISI 1018 Angle | Carbon Steel AISI 1018 Angle | Carbon Steel AISI 1018 Angle | Carbon Steel AISI 1018 AngleThese AISI 1018 Carbon Steel T-Beam offer faster machining speeds, longer tool life, improved part quality, and lower total cost of machined parts.

Our AISI 1018 CS Angle is forged between 2250 Degree F / 1750 Degree F (1230 Degree C / 955 Degree C) following a soak at forging temperature of 30 minutes per inch of billet or ingot section thickness.

Sachiya Steel International is one of the well-known stockiest and trader of quality Monel K500 Angle  Other Products , which combines excellent corrosion resistance with elevated mechanical properties and relatively easy fabrication.

Applications of Monel K500 Angle are limited to a maximum temperature of 1000 Degree F per ASME.Monel K500 C-Channel is often chosen to solve SCC problems, which may occur with 316L stainless.

Monel K500 H-Beam was designed for maximum resistance to acid attack and demonstrates superior resistance to stress – corrosion cracking in boiling sulphuric acid.

Monel K500 I-Beam also has excellent general corrosion resistance to sulphuric acid and to chloride stress corrosion cracking.Monel K500 Angle | Monel K500 Angle | Monel K500 Angle | Monel K500 Angle | Monel K500 AngleMonel K500 T-Beam can be used for a wide variety of applications including: control valves, pressure relief valves, and centrifugal pumps.

Alloy K500 Angle has minimal carbide precipitation during welding and excellent mechanical properties and fabricability is excellent design features.Resistance to sulphuric acid is particularly exceptional but Alloy K500 C-Channel shows useful resistance in phosphoric acid, nitric acid as well as in chloride environments.

With good general corrosion properties, Alloy K500 H-Beam usage has expanded in chemical, petrochemical and power generation plants.

Sachiya Steel International is one of the well-known Manufacture & Exporter in Stainless Steel 304H Wire Mesh, which contains niobium for stabilization against sensitization and resultant inter – granular corrosion.

SS 304H Hexagonal Wire Mesh is a nickel – iron – chromium austenitic alloy that was developed for maximum resistance to acid attack, specifically sulphuric acid.

SS 304H Welding Wire Mesh has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulphuric, phosphoric, and nitric acids.Although originally designed for use in sulphuric acid related industries, Stainless Steel 304H Netting Wire Mesh is now a popular choice for a wide variety of industries including the chemical, food, pharmaceutical, and plastics industries.

In addition, Stainless Steel 304H Woven Wire Mesh is used in heat exchangers, mixing tanks, metal cleaning and pickling equipment, and piping.

Stainless Steel 304H Spring Steel Wire Mesh is great for corrosion resistance, which further appears to fall between both the stainless and nickel categories as it contains characteristics of both.SS 304H Fencing Wire Mesh is often chosen to solve stress corrosion cracking problems, which may occur with other alloys.

Our SS 304H Wire Mesh was designed for maximum resistance to acid attack and demonstrates superior resistance to stress – corrosion cracking in boiling 2 0% to 40 % sulphuric acid, and also has excellent general corrosion resistance to sulphuric acid and to chloride stress corrosion cracking.SS 304H Wire mesh SpecificationsSpecifications:ASTM A 164 ASME SA 164Standard:DIN, ASTM, BS and all International StandardsLength:30m to 100″Width:1m to 48″Type:Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc.

Sachiya Steel International is one of the prominent Manufacture and Exporter of Monel Alloy K500 Tube to Female Pipes, where we are catering our services to many Industries.

Monel K500 Tube Fittings has excellent general corrosion resistance to sulphuric acid and to chloride stress corrosion cracking.

Resistance to sulphuric acid is particularly exceptional but Monel K500 Compression Fittings shows useful resistance in phosphoric acid, nitric acid as well as in chloride environments.Monel K500 Female Connector Fittings has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulphuric, phosphoric, and nitric acids.

Monel K500 Ferrule Tube Fittings also contains niobium for stabilization against sensitization and resultants inter – granular corrosion.

At 33 % nickel, Monel K500 Double Ferrule Tube Fittings has practical immunity to chloride stress corrosion cracking.

Monel K500 Compression Tube Fittings is often chosen to solve SCC problems, which may occur with 316L stainless.Alloy K500 Female Connector Fittings can be used for a wide variety of applications including: control valves, pressure relief valves, and centrifugal pumps.

Sachiya Steel International offers a broad spectrum of Hastelloy C22 Threaded Forged Fittings to the esteemed clients, which are designed and engineered utilizing advanced technology and high quality metals.

Hastelloy C22 Forged Threaded Elbow Fittings (UNS N06022) has shown an outstanding resistance to a wide range of chemicals, including chlorides, organic and inorganic solutions.

Hastelloy C22 Forged Threaded Tee Fittings also has excellent resistance to oxidizing aqueous media including wet chlorine and mixtures containing nitric acid or oxidizing acids with chlorine ions.Hastelloy C22 Forged Threaded Cross Fittings has better overall corrosion resistance than Hastelloy C-4 & C-276 and Inconel 625.

Meanwhile, these Hastelloy C22 Forged Threaded Cap Fittings are as well being offered in customized sizes and shapes to our customers.

We also offer Hastelloy C22 Forged Threaded Bend Fittings at market leading rates.

Annealing of Hastelloy C22 Forged Threaded Coupling Fittings can be performed at a temperature range between the ranges of 2020 Degree F – 2150 Degree F followed by a rapid quench.Hastelloy C22 Threaded Forged Fittings | Hastelloy C22 Threaded Forged Fittings | Hastelloy C22 Threaded Forged Fittings | Hastelloy C22 Threaded Forged Fittings | Hastelloy C22 Threaded Forged Fittings | Hastelloy C22 Threaded Forged Fittings | Hastelloy C22 Threaded Forged Fittings | Hastelloy C22 Threaded Forged Fittings Cooling of Hastelloy C22 Forged Threaded Union Fittings at an accelerated rate avoids the formation of detrimental phases which form between the ranges of 1400 Degree F – 1800 Degree F. Hastelloy C22 Forged Threaded Bushing Fittings also offers optimum resistance to environments where reducing and oxidizing conditions are encountered in process streams.