Sachiya Steel International offers a widespread quality collection of Incoloy 800 Nipple , which has useful oxidation resistance through 1800 Degree F. Although cold workability of Incoloy 800 Hexagon Reducing Nipple is similar to austenitic stainless steels, work hardening tends to be slightly lower.
Incoloy 800H Hexagon Nipple was intended for high temperature structural applications, and has further modifications to the combined titanium and aluminum levels to ensure optimum high temperature properties. Typical applications for Incoloy 800HT One End Threaded Nipple are – Heat exchangers, process piping, carburizing fixtures, carburizing retorts, furnace parts, etc.
Incoloy 800 Nipple | Incoloy 800 Nipple | Incoloy 800 Nipple | Incoloy 800 Nipple | Incoloy 800 Nipple | Incoloy 800 Nipple | Incoloy 800 Nipple | Incoloy 800 Nipple | Incoloy 800 Nipple
Alloy 800 Both End Threaded Nipple has been widely used for its strength at high temperatures and its ability to resist oxidation, carburization, and other types of high – temperature corrosion. Alloy 800H Concentric Swaged Nipple is also used in valves, fittings and other machineries exposed to corrosive attack from 1100 Degree F – 1800 Degree F.
Alloy 800HT Eccentric Swaged Nipple is resistant to high temperature corrosion and readily machined by standard methods. Alloy 800 Hexagon Nipple is a combination of nickel and chromium alloy that has excellent tensile strength and resistance to oxidation as well as carburization properties.
The chemical composition of the two alloys are identical to Incoloy 800 Nipple (UNS N08800), with the exception of the higher level of carbon present in both grades — (0.05 % – 0.10 %) in Incoloy 800H Nipple, and (0.06 % – 0.10 %) in Incoloy 800HT Nipple.
|
Incoloy 800 / 800H / 800HT Nipple
|
||
| Specifications | : | ASTM A336 & ASME SB336 |
| Dimensions | : | ANSI/ASME B16.11 & BS3799, etc. |
| Size | : | ⅛” to 4” |
| Class | : | 2000LBS, 3000LBS, 7180LBS, 9000LBS, etc. |
| Grade | C | Mn | Si | Fe | S | Cr | Al-Ti | Ni | |
| 800 | min. | – | – | – | 39.5 | – | 19.0 | 0.15 | 30.0 |
| max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 0.60 | 35.0 | |
| 800H | min. | 0.05 | – | – | 39.5 | – | 19.0 | 0.15 | 30.0 |
| max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 0.60 | 35.0 | |
| 800HT | min. | 0.06 | – | – | 39.5 | – | 19.0 | 0.85/0.25 | 30.0 |
| max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 1.20/0.60 | 35.0 | |
Sachiya Steel International is a Leading Manufacturer And Exporter of Carbon Steel A694 Threaded Forged Fittings, which is used in a wide range of marine, oil and gas environments.
Regarding cold workability in ASTM A694 Carbon Steel Forged Threaded Lateral Tee, care is required as proof stress is high and elongation is low in comparison with SS 304.
ASME SA 694 Carbon Steel Forged Threaded Hexagonal Plug is commonly used in the mining, marine, pharmaceutical, petrochemical and chemical engineering industries.
Typical applications of ASTM A694 Carbon Steel Forged Threaded Hex Plug include flanges, pumps, valves, chokes, connecters and manifolds.We recommend you contact your welding consumables supplier who should provide you full assistance and information of welding ASME SA 694 Carbon Steel Forged Threaded Bushing.
Use of welding electrodes for ASTM A694 Carbon Steel Forged Threaded Union is recommended, where pre – heating and post – heating are not necessary.
In welding, the inter-pass temperature for ASME SA 694 Carbon Steel Forged Threaded Coupling should be no more than 100 Degree C in order to prevent formation of intermetallic compounds.Carbon Steel A694 Threaded Forged Fittings | Carbon Steel A694 Threaded Forged Fittings | Carbon Steel A694 Threaded Forged Fittings | Carbon Steel A694 Threaded Forged Fittings | Carbon Steel A694 Threaded Forged Fittings | Carbon Steel A694 Threaded Forged Fittings | Carbon Steel A694 Threaded Forged FittingsSolution annealing of ASTM A694 Carbon Steel Forged Threaded Fittings should be performed at 1100 Degree C and higher followed by being quenched in water or rapidly cooled by other means.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Brass Tube to Male Fittings, which resists most oxidizing acids and can withstand all ordinary rusting.
There is little overall difference in corrosion resistance among of Brass Tube Fittings, but slight differences in chemical composition do make certain grades more resistant than others do against particular chemicals or atmospheres.
Brass Compression Fittings is non – magnetic steel which cannot be hardened by heat treatment, but instead must be cold worked to obtain higher tensile strengths.
Brass Compression Tube Fittings has superior corrosion resistance and is generally nonmagnetic, along with harden able only by cold working.Brass Male Connector Fittings is immune to foodstuffs, sterilizing solutions, most of the organic chemicals and dyestuffs, and a wide variety of inorganic chemicals.
Because of its ability to withstand the corrosive action of various acids found in fruits, meats, milk, and vegetables, Brass Ferrule Fittings is used for sinks, table tops, coffee urns, stoves, refrigerators, milk and cream dispensers, and steam tables.Brass Double Ferrule Fittings are not ideal in temperature range 427 Degree C – 816 Degree C where precipitation of chromium carbides occurs.
Due to layer – wise building method, Brass Ferrule Tube Fittings have a certain anisotropy which could be seen from mechanical properties.
Bamboo charcoal has been in existence for hundreds of years, but the carbonization process utilized to create this has changed through the years.
Today, you will find bamboo charcoal machine made to complete this technique without having issues.
The process itself has four stages that the bamboo works to produce charcoal.
To achieve this, the bamboo is placed in the kiln that does not reach greater than 120 degrees Celsius.
See the sawdust charcoal making machine here.At this particular heat, the chemicals become unstable and start to decompose.
The bamboo will begin to breakdown and release gasses and liquid products.The gas products will include flammable ethylene and methane.
Sachiya Steel International is one of the Leading Manufacturer And Exporters of Inconel 600 Threaded Forged Fittings, where customers can purchase the same at industry-leading prices.
Our Inconel 600 Forged Threaded Elbow (UNS N06600) is used for furnace components, in chemical and food processing, etc.
These Inconel 600 Forged Threaded Tee display freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range.
The high nickel content in our Inconel 600 Forged Threaded Cross enables it to retain considerable resistance under reducing conditions.These Inconel 600 Forged Threaded Cap is also often used in high-temperature static applications.
Inconel 600 Elbow Forged Fittings shows high levels of atmospheric corrosion.
Our Inconel 600 Forged Threaded Fittings cannot be hardened by heat treating and also displays good heat resistance and freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range.
