logo
logo
Sign in

Steps to Refinish Wood Veneer Surfaces

avatar
Chhabra Timbers
Steps to Refinish Wood Veneer Surfaces

Wooden goods have been around for quite a while presently and you can discover them surrounding you from workplaces and schools to homes. Most current furniture is produced using either a plyboard or particleboard that has a wood veneer surfacing. Teak wood veneers and different species improve the presence of the furniture giving it a certifiable wood look and feel. With time, wood veneers lose their sparkle and finish because of outer effects and require revamping. While resurfacing may appear to be a simple task, you should be mindful so as not to harm the veneer surface. We offer Steps to Refinish Wood Veneer Surfaces.

1. Ensure it is Wood Veneer and Not Laminate 

Wood veneer and laminates are both used to cover the plywood for stylish reasons. A veneer is an extremely slim layer cut from genuine wood and laminate is from kraft paper and resins. In case you are uncertain about whether the highest surface of your furniture is a veneer or a laminate, try sanding a bit. If you see the wood grain, it is surely wood veneer. 

2. Check the Thickness of the Veneer 

Wood veneers are extremely thin and their thickness can be pretty much as little as 1/8th of an inch. Regardless of whether you can sand, any veneer will rely enormously upon its thickness. To be certain of thickness, try sanding a little piece of your furniture by hand. Check whether you can eliminate the old layer of varnish without sanding through the thickness of the veneer. You can continue with the rest of the piece if your test outcomes show that it is safe to do so.

3. Take Extra Care While Sanding 

Sanding veneer is a delicate process as even a slight mistake can destroy the whole look of the furnishings. It is suggested that you begin sanding tenderly by hand or utilizing a palm sander. Ensure that you don’t sand across the grain as it can destroy the veneer’s feel requiring total resurfacing. 

4. Utilize High-Quality Wax and Polish 

To finish the refinishing of your veneer, you need to apply staining with wax and polish. The wax is applied for a darker look. The wood finish wax is applied for a more extended time frame so it is absorbed appropriately and uniformly by the veneer. Wipe off any excess stain wax with a dry fabric. After the wax is consumed by the veneer, the last advance is to apply polish. Utilize a spray machine for the application.

Follow the above Steps to Refinish Wood Veneer Surfaces.

Some Important Points To Consider While Buying Wood Veneers

Regardless of whether you are a yacht manufacturer, a furniture manufacturer or a millworker, knowing what sort of veneer and the approaches to store them are of vital significance.

Wood Veneer
  1. 100% hardwood grade base plywood ought to be used for veneers as it strengthens furniture. 
  2. 0.5 mm thick veneers ought to be used since it gives the best finish and sturdiness to furniture. 
  3. Get the most suitable glue and backing combination. Should demand knowing what has been utilized. 
  4. Keep the veneer sheets in two pairs. The two front sides should confront one another. This is done to keep away from scratches on the veneer surface. 
  5. Keeping a room temperature climate in the veneer stockroom is of the most extreme significance. This prevents stripping or breaks in veneer sheets. 
  6. Settle on satisfactory application techniques most appropriate according to the application. It may very well be either the traditional and standard mallet veneering or the modern vacuum press veneering. 
  7. Utilizing a sharp edge and the right angle of cutting the veneer sheet additionally evades the issue of chipping. 
  8. Veneers ought to consistently be dealt with utilizing great quality sealer and topcoats to get the best finish. 
  9. Rough cut veneers ought not to be sanded at the time of finishing. 

Other than the tips referenced above, do not waste the extra bits of veneer. There are a lot of ways they can be effectively utilized. The main highlight is thought of while purchasing veneer is the brand you are getting it from. Continuously pick trusted, straightforward and ensured manufacturers.

Wrap Up

Surfaces, for example, teak wood veneer give the furniture a top-notch look alongside upgrading the general appeal of the decor. In case you are searching for premium quality teak wood veneers, look no farther than Chhabra Timbers. We offer an enormous scope of excellent wood veneers that give you perpetual plan and style opportunities for all of your surfaces. For more details about wood veneer textures and designs, call +91 97851 67777 or +91 99299 55543 or [email protected] or fill out our contact form.

collect
0
avatar
Chhabra Timbers
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more