Pipes and Tubes Manufacturers in India - Shashwat Stainless Inc.

Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 347H Tube to Male Fittings, where a mixture of nitric acid and hydrofluoric acid is used in pickling.

As a distinctive feature of high Nickel, machinability is difficult in comparison with the austenitic Stainless Steel 347H Tube Fittings, but is easier than with Ni – based alloys.

Stainless Steel 347H Compression Fittings is used as a super – hard tool whenever possible, together with a slow feed speed and large cut depth, is advised.

Possible welding methods include shielded metal arc welding, TIG welding, and plasma welding, in the same manner as with standard austenitic Stainless Steel 347H Male Connector Fittings.As welding consumables, Stainless Steel 347H Ferrule Tube Fittings should be used, where pre – heating and post – welding heat treatment are not necessary.

By adding optimal quantities of chromium, molybdenum, nickel and other alloying metals, we improve Stainless Steel 347H Double Ferrule Tube Fittings to provide overall corrosion protection as well as improve resistance against grain boundary corrosion, pitting and crevice corrosion, and stress corrosion cracking.Stainless Steel 347H Tube to Male Fittings | Stainless Steel 347H Tube to Male Fittings| Stainless Steel 347H Tube to Male Fittings | Stainless Steel 347H Tube to Male Fittings | Stainless Steel 347H Tube to Male Fittings | Stainless Steel 347H Tube to Male Fittings | Stainless Steel 347H Tube to Male Fittings | Stainless Steel 347H Tube to Male FittingsSolution annealing of Stainless Steel 347H Compression Tube Fittings should be performed at 1105 Degree C, and higher followed by being quenched in water or rapidly cooled by other means.

However, due to the high corrosion resistance of 347H Stainless Steel Male Connector Fittings, scale is somewhat difficult to remove in comparison with Type 347.Stainless Steel 347H Tube to Male Fittings SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for BrassSS 347H Tube To Male Fittings Chemical CompositionGradeCMnSiPSCrCbNiFeSS 347H0.04 – 0.102.0 max1.0 max0.045 max0.030 max17.00 – 20.008xC – 1.109.00 – 13.0063.72 minStainless Steel 347H Tube To Male Fittings Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation8.0 g/cm31454 °C (2650 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20535 %Equivalent Grades for 347H Stainless Steel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 347H1.4961S34709SUS 347H–––X6CrNiNb18-12 SS 347H Tube To Male Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.

Manibhadra Fittings is a highly acclaimed Copper Tube Manufacturer in India.

Copper tubing is joined using flare connections, compression connections, pressed connections or soldering.

One of our popular products is Copper Tubes.

We are one of the Largest Stockists of Copper Tubes in India.

We have a huge stock of the following products: Copper Pipes Dealers, Mexflow Copper Pipes & Tubes, Mandev Copper Pipes & Tubes, Indigo Copper Pipes & Tubes.For More Details Visit Here:Source: https://manibhadrafittings.com/copper-tube-manufacturer-india/Website: https://manibhadrafittings.com/Call us: +91 83697 23175Mail us: [email protected] 

Sachiya Steel International is one of the Leading Manufacturer and Exporter Stainless Steel 904L Tube to Male Fittings, which is useful for high temperature service in gases containing Sulphur.

In various types of high – temperature water, Stainless Steel 904L Tube Fittings displays low corrosion rates and excellent resistance to stress – corrosion cracking.

Mechanical properties of Stainless Steel 904L Compression Fittings vary with product form and temper.

Stainless Steel 904L Male Connector Fittings have the capacity to function at very high temperatures and severe mechanical stress, and also where high surface stability is required.The substantial chromium content gives these Stainless Steel 904L Ferrule Fittings with an outstanding resistance to oxidizing chemicals and to high – temperature oxidizing gases.

Heavy duty machining equipment and tooling should be used in Stainless Steel 904L Double Ferrule Fittings to minimize chatter or work – hardening of the alloy ahead of the cutting.904L Stainless Steel Male Connector Fittings supplied by us are accepted by clients in various spheres of the industries ranging from basic industries such as Sugar, Paper, Textile, Dairy, and Engineering to more complexes such as Oil & Gas.

904L Stainless Steel Tube Fittings is normally used in the annealed temper and strength characteristics described below is representative of annealed material.

Sachiya Steel International is one of the Leading Manufacturer And Exporter for Stainless Steel 904L Tube to Union Fittings, where it is inserted in to nitric acid but attacked by concentrated sulphuric acid and hydrochloric acid.

Stainless Steel 904L Tube Fittings is a super austenitic stainless steel that is well known for its outstanding resistance to pitting, crevice corrosion, stress cracking, and fatigue corrosion.

Stainless Steel 904L Compression Fittings is a corrosion resistant alpha titanium alloy with similar mechanical properties to the commercially pure grades.This makes Stainless Steel 904L Union Fittings ideal for applications that require lightness of weight and excellent strength such as oil & gas (down-hole), military and sporting goods.

In most aqueous environments, Stainless Steel 904L Union Tube Fittings demonstrate an excellent corrosion resistance due to the protective oxide films spontaneously formed and remain stable on the surface.

When the surface of 904L Stainless Steel Tube Fittings is exposed to oxygen or moisture, a new corrosion resistant layer of titanium oxide is created.Stainless Steel 904L Tube to Union Fittings | Stainless Steel 904L Tube to Union Fittings | Stainless Steel 904L Tube to Union Fittings | Stainless Steel 904L Tube to Union Fittings | Stainless Steel 904L Tube to Union Fittings | Stainless Steel 904L Tube to Union Fittings | Stainless Steel 904L Tube to Union Fittings | Stainless Steel 904L Tube to Union Fittings904L Stainless Steel Compression Fittings are also unique among metals in the chemical processing industry for handling chlorine (wet) and chlorine compounds in aqueous solutions.

904L Stainless Steel Union Fittings is fully resistant to solutions of chlorides, hypo – chlorites, chlorates, perchlorates and chlorine dioxide.

A welded tube is created through roll forming strips or sheets of steel into a tube shape after which welding the seam longitudinally.

Welded tube can be accomplished either by hot forming and cold being created processes.

Of the a pair of, cold forming results in smoother finishesand tighter tolerances.

The seam can possibly be left beaded or it can be further worked by frosty rolling and forging techniques.

The welded tube will also be drawn similar to seamless tube to offer a finer weld seam with better surface finishes along with tighter tolerances.Those concluded, after cold rolling, by means of heat treatment, pickling or other equivalent treatment and lastly by cold rolling to help given appropriate luster.

Professional medical equipment, Food industry, Building material, Kitchen utensils.These processed with bright high temperature treatment after cold going.