UGC
Microsoft states that the new Windows 10 driver system can cause errors.The Driver Verification can sometimes be a bit frustrating for the users, no matter even if it is intended to improve the security of the device.The recent change that Microsoft has made in its October 2020 Patch Tuesday updates regarding the Windows driver verification process might cause headaches for the users.There’s a straightforward well-intentioned reason behind this change.This change has been issued because Microsoft doesn’t want to compromise on the Windows 10 systems and intends to prevent hardware drivers that are prone to malware and can get exploited.No doubt, Microsoft’s all-new driver verification model will help prevent users, but it can cause driver errors in Windows 10 systems.These errors might occur in case if the company fails in verifying the publisher of the driver.In the current scenario, when the verification process fails, the users can see two driver error messages displayed by Windows 10.They are:The first error message states: “Windows can’t verify the publisher of this driver software.”The second message states: “No signature was present in the subject.”As mentioned above, the error messages signify that Windows, while validating a driver, discovered a catalog file that was improperly formatted, leading to the failure of the installation process.New Driver SystemIf Windows fails to verify a driver, Microsoft’s support document will signify that the users: “should contact the driver vendor or device manufacturer (OEM) and ask them for an updated driver to correct the issue.”This, however, makes sense, but the users using Windows 10 would likely get frustrated.This is because the users, after getting signified by the statement by Microsoft, will have to reach out to a company due to an odd request because of the change made by Microsoft into its operating system.Luckily these issues will only be experienced by the users when they will be applying the updates to the old driver.
UGC
Whenever you install any apps on your Windows 10 computer, you can see those recently installed apps in the Start Menu of your computer system.To see those apps, you just have to click on the Start Menu, and after this, the list of the recently added apps will be visible on your computer screen.But, what if you want to remove any recently added apps from the Start Menu?For that, you will need to go through a simple procedure.Well, to help you with that, we have provided you with the complete guide.In the following article, we have mentioned the method you will have to follow to perform the task.
2
UGC
Mozilla Firefox and Google Chrome, both are the most popular and commonly used open-source web browsers that provide its users with a great web surfing experience and best search results.Both are user-friendly and fast web browsers that anyone can easily use on their computer system.And usually, we open any program on our laptops or computers by the simple method of searching for it or using some shortcut key combination.Well, in that case, you can use another way to open any programs or any web browser on your computer.All thanks to the flexibility of the Windows 10 operating system that enables us to do so.The following article will let you know the methods to open Google Chrome and Mozilla Firefox using a command prompt on your Windows 10 computer system.
UGC
Bing search engine is one of the inbuilt features of the Windows 10 operating system that you can find in the Start Menu.So, disabling this feature is the perfect option.And to help you to sort out the technique, we have come up with this article.Here, in the following report, we have provided you with the methods through which you can easily disable the Bing in the Windows 10 Start Menu.And here, we have mentioned two different methods that will help you to complete the task.Now, hit the enter key.And now, go to the following path: “HKEY_CURRENT_USER\SOFTWARE\Policies\Microsoft\Windows\Explorer”.
UGC
Windows 10 was launched in the year 29 July 2015 by Microsoft, and since it’s launched, it has undergone a lot of changes.Realising the needs and demands of the users, Microsoft keeps on adding a lot of new features to its products.The features included in the Windows 10 allow the users to customise their computers and laptops as per their preferences.So, if you are one of those users who want to boost their productivity levels using Windows 10, then this article is for you.Have a look below:The Feature to Minimise all the Opened Windows With Just a Single ClickIt is one of the most efficient features of the Windows 10 operating system that can make your work a lot easier and convenient.By clicking on the “Show Desktop” button, you can close all the windows at once.
UGC
A face recognition software tool may help you if you want to enhance your security and privacy.The software recognizes the user and lets them login to the computer.KeyLemonKeyLemon is a face recognition software tool that makes it possible for you to unlock your PC without you having to type passwords.It comes with an inbuilt detection feature that keeps your PC safe from intruders.This great facial recognition software tool keeps your data confidential and does not share it with other marketers or advertisers who often target you with specific advertisements.If you are looking for a great face recognition software for Windows 10 PC, you can try out this amazing piece of software.TrueKeyHave you gone tired of typing the same passwords repeatedly?
UGC
Screen recording helps you capture every instance of gameplay; also, you can create tutorials of anything you do on your Windows.These screenshots get saved in MP4 and other video formats.From here, enable “record game clips, screenshots, and broadcast using the Game bar.”You can also set up configurations for recorded video, audio quality, and video qualityOnce everything is set, you can press the red circle in the game bar to start recording.Click again, to stop, or use the shortcut "Win + Alt + R." The recorded videos will be saved as a default in “D:\Videos\Captures.”Use the NVIDIA Control PanelIf you have installed an NVIDIA graphics card on your PC, you can make use of the NVIDIA Control Panel application to record your screen.Once installed, you can access the NVIDIA application from the Start menu.This app allows you to set up the screen resolution, refresh rate, and other settings.Download and install the GeForce Game Ready driver from NVIDIA's official website.It will take a while, as the graphics driver will undergo a basic system compatibility test, before launching the GeForce Game Ready driver on your computer.You can easily install Screen Recorder Pro from the Microsoft Store, and access it from the Start menu.Unlike the apps mentioned above, Screen Recorder Pro offers multiple options to view the screen, including full screen, a specific region, specific screen, only audio, and desktop duplication.
2
UGC
A number of gamers often encounter this issue.And luckily, this error can be fixed easily.Read on and follow the solutions mentioned below to fix this error on your Windows 10 device.Update the Graphics Driver through Device Manager You should pursue the steps provided below: Tap the Windows and R keys simultaneously to launch the Run box.After that, insert ‘Devmgmt.msc’ into it and hit the Enter button to invoke the Device Manager.Then find the Display Adapters from the Device Manager screen.Select the arrow icon to view the graphic devices.Go to the device you would like to update, and right-click on it.Now, choose the Update Driver option.You should enable the internet connection.Now, choose the option of ‘Search automatically for updated driver software.’ The PC will browse the system storage and internet for the newest drivers and then install them.Launch Windows Updates You should pursue the steps provided below: Go to the Windows Search section.Thereafter, input ‘Windows update’ into it and select the OK button to launch the Windows Update screen.Select the button of ‘Check for updates.’After that, restart the system.Enable Compatibility Mode for the Game You should pursue the steps provided below: Reach the game’s installation folder and right-click on it.Then choose the option of Properties from the menu.You should choose the tab of Compatibility.Select the drop-down menu beneath the section of Compatibility mode and select the previous version of Windows.Beneath the section of Settings, tick the boxes of ‘Disable full-screen optimizations’, and ‘Run this program as an administrator.’Tap the button of Apply to save the changes.Now, click on the OK button.
UGC
Well, if your answer is yes, then this guide is for you because today, we are going to teach you exactly how you can do this and use your voice to control your Windows 10 computer.So, let’s get started.Here’s how you can set up voice control for your Windows 10 computer.Sources: https://a1activate.co.uk/blog/post/130054/how-to-set-up-voice-control-on-windows-10Buy a Right MicrophoneIf you want to control your Windows 10 computer, you will require a good microphone to give your commands to it.Yes, of course, you can use your laptops or webcams microphone, but these microphones are for normal use and may not be a good option if you will use them to control your computer system.Note: You may see a warning popup on your screen.Now follow all the on-screen instructions to set up your mic.8.Next, you will be asked to calibrate your mic by reading a sentence.9.
UGC
The Kindle books you have purchased on Amazon will automatically appear in the Kindle app.The app is available on multiple platforms such as Windows, Mac, iOs, and Android.Even if you do not have a Kindle Reader, you can still make use of the Kindle app.However, if the app is not working on your Windows 10 device, then check out the fixes mentioned below.Updating System DriversYou can pursue these guidelines provided below:Firstly, reach the DriverFix and download it on your PC.Thereafter, instantly launch it, the utility will begin scanning the system for any problems with existing drivers automatically.Once the scanning process is over, you will have to mark the boxes for the drivers you would like to update or install.Run System File CheckerYou can pursue these guidelines provided below:Go to the Windows menu icon to invoke the Search section.Then, input ‘cmd’ into it and select the OK button to launch the Command Prompt.After that, select the ‘Run as administrator’ beneath the Command Prompt.You should insert ‘sfc /scannow’ into it then hit the OK button.Now, you have to wait to finish the scanning process, then reboot the system.Run DISMYou can pursue these guidelines provided below:Open the Win + X menu.Then launch the Command Prompt (Admin).Thereafter, copy the following command and paste it: DISM.exe /Online /Cleanup-image /RestorehealthIf the DISM is unable to obtain files online, try the installation via DVD or USB.Now, input media then insert following command: DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:RepairSourceWindows /LimitAccessReboot the Kindle ApplicationYou can pursue these guidelines provided below:First of all, shut the dialog box, if any.After that, go to the taskbar and right-click on it, then launch the Task Manager.Don’t forget to close the processes associated with Kindle.Now, attempt to launch the Kindle app once again.Using Disk CleanupYou can pursue these guidelines provided below:Navigate to the This PC icon on the desktop.Thereafter, select the PC partition, and right-click on it, then choose the Properties option.You should click on the Disk Cleanup.Later, mark the boxes next to ‘Temporary files.’Now, verify the same, then remove the temporary files.Launch Kindle as AdministratorYou can pursue these guidelines provided below:Reach the folder of the installation of the Kindle software.After that, find the file of kindle.exe and right-click on it.Choose the Properties option.Once you reach the tab of Compatibility, mark the ‘Run as Administrator’ checkbox.Now, select the OK button.If the Kindle app is not working on your Windows 10 device, then do follow the stepwise solutions mentioned above.Marshall Lyne is a self-professed security expert; he has been making the people aware of the security threats.His passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media.
UGC
In this article, we will mention how you can fix your Bluetooth problems in Windows 10.If you are looking to fix Bluetooth problems in your PC, then the Bluetooth support system from the Windows operating system is the best choice.To access the Bluetooth Troubleshooter, open the Window’s “Settings” and click on the “Update & Security” and then tap on “Troubleshoot.”  Click on the “Bluetooth” option and then “Run the Troubleshooter.” Once you launch this function, it will show you different ways to resolve your Bluetooth problem.Once you identify the problem, follow all the instructions, and restart your device and recheck the Bluetooth.Open the “Windows Device Manager” and click on the “Bluetooth” option.Sometimes your PC might not set Bluetooth connections and set your device as discoverable to other devices.To check your Bluetooth connection settings, click on the “Settings” menu and then “Devices.” After that, go to the “Bluetooth & Other Devices” and click on the “More Bluetooth Options.” Make sure that you mark the “Allow Bluetooth Devices to Find This PC” checkbox.Check if your Bluetooth Services Are RunningOne of the most common Bluetooth errors is that your PC’s Bluetooth support service might not be active.
UGC
Windows 10 is the most convenient operating system as it is configurable as per its users’ needs.It offers you with a lot of amazing built-in features to use.It comes with a group editor policy feature that enables the users to make the organization wise changes by going through the settings.However, this great feature is mainly usable by the IT admin to change the advanced settings, but other individuals can use it too.If that is the case, then now, there is no need to go anywhere.Here, in the following article, you will get to know the way to disable the security settings from File Explorer on your Windows 10 computer.We have mentioned the step-by-step process going through which you can use the Group Policy Editor feature to disable the security settings.
UGC
This built-in feature enables its users to sync all their files and folders of their computer with the cloud storage.Well, thanks to this service, it makes it easy enough for you to share any files with your friends, family, and colleagues.If yes, then this is the right place to come.The following report will let you know the ways through which any Windows 10 user can use OneDrive to share files.So, if you want to proceed further, please go through the full article.The Methods for Sharing Files Using OneDrive in Windows 10Sending any files and folders as attachments in email apps typically limit how much data one can send at one time.You can do that by going through the left-side menu and then click on the OneDrive folder from there.Now, on the next screen, search for the folder containing the file that you would like to share.
Downloading a clean copy of Windows 10 version 2004 is remarkably easy, doesn’t take very long (if you have a fast internet connection), and may well save your keester at some point. Don’t worry, it’s 100% legal and, at worst, will occupy about 8 GB on a convenient drive for a while. Nothin’ to it.Step 1. In Windows 10, use the Media Creation Tool If you have a PC with a license for Windows 10, the easiest way to get version 2004 involves Microsoft’s Media Creation Tool. Go to the Download Windows 10 site and under "Create Windows 10 installation media," click the link marked Download tool now. To read this article in full, please click here
4
More

Top