It is we at Heavy Metal CNC who can offer you Affordable CNC Machining kit while maintaining quality and timely delivery.
If you are not satisfied with our products then you can return the same without giving any clarification.
It is we at Heavy Metal CNC who can offer you Affordable CNC Machining kit while maintaining quality and timely delivery.
If you are not satisfied with our products then you can return the same without giving any clarification.
This NEW machine includes:3 20mm X 5mm VXB ball screws3 VXB ball nuts.
Preloaded for minimal backlash.2 nema 34 motors.
1200 oz/in Dual Shaft Stepper Motors.1 nema 42 motor 2830 oz/inPokeys 57 breakout board.Control software is Mach4All drivers and boards are in an aluminum box with On/Off switch and Emergency Stop switch.The machine motor spindle is 220vThe software comes with a Dell touch screen Laptop with everything set up.Zero backlash helical couplings for X & Y.Z uses timing pulleysAll aluminum parts anodized to be scratch and corrosion-resistant.All stainless steel hardware.The machine has been proven in.
The motors tuned and set.
It is a plug and plays for your convenience.This comes with a one-year full warranty on everything but the laptop.Allow 4-6 weeks for delivery
We anodize in 5 colors.
Red, Blue, Green, Black, and Clear.We have had to add an up-charge for the Red, Blue, and Green anodize.SX2.7 includes LMS 5500, and 5550Standard Ball screws are .625" X .2" pitch with a C7 tolerance.
+/-.004 over 12"Premium Ball screws are 16mm X 5mm pitch with a C6 tolerance.
Our Kit includes :3 Thomson Ball Screws.
.625" X .2" Pitch C73 Thomson Ball Nuts.
Preloaded for minimal backlash.4 new thrust bearing for the X and Y axis3 ball nut blocks for mounting the ball nuts1 X axis motor mount for nema 231 Y axis motor mount for nema 231 Z axis motor mount with 2 installation brackets for nema 34All stainless steel cap screws for mounting motors4 Cap screws for installing Z axis brackets2 timing pulleys with timing belt2 Zero backlash helical couplingsAll aluminum part are anodizedNo corrosion, no oxidationScratch resistant
This kit includes:3 VXB ball screws.
20mm X 5mm pitch3 VXB ball nuts.
Preloaded for minimal backlash.X axis motor mount for Nema 34 motorX axis ball nut block and bearing blockY motor mount for Nema 34 motorY axis ball nut blockZ motor mount for Nema 42 motorZ axis ball nut block & bearing blockZ cover plate for top of columnZ riser blocks for motor2 timing pulleys with timing belt.Zero backlash helical couplings for X, Y & Z axisStainless steel cap screws for mounting motors and ball nut blocksNew angular contact bearings for all 3 axis'All aluminum parts anodized to be scratch and corrosion resistant.Anodize clear and black only
We anodize these in 5 different colors.Green, Red, Blue, Black, and Clear.We have had to add an up-charge for Red, Blue, and Green AnodizeThe X2 and SX2 include Harbor Freight #44991, Micro-Mark #84630, and Grizzly G8689The X2L, SX2L, and X2D Also include the Little Machine Shop #3990, #4962, and #4190, and Grizzly G0781Our standard ball screws are C7.
They are .625" X .2" pitch with a tolerance of +/-.004" over 12"Anything not listed, please ask.Click on the following link for a complete electronics kit for the X2.
Grizzly raised the price of the machine.
So we had to as well.This NEW machine includes:3 C7 ball screws 16mm X 5mm pitch3 double ball nuts for minimal backlash2 nema 23 motors for X & Y 570 oz/in 5A 1/4" Dual Shaft Stepper Motors.1 nema 34 motor for Z.
1200 oz/in 6A stepper motorLimit switches for all axis'Pokeys57 controller that can handle up to 8 axis'.
Look at it HEREControl software is Mach4 software.
It can be viewed HEREThe software comes with a Dell touch screen Laptop with everything set up.Zero backlash helical couplings for X, Y & ZAll aluminum parts anodized to be scratch and corrosion resistant.All stainless steel hardware.It also includes the stand.The machine has been proven in.
The motors tuned and set.
Is it that you require Milling Machine CNC Conversion Kits for the Seig X3, SX3, and Grizzly G0619, and G0463 Table Top Mills?
If your requirement is so then you can depend on us at Heavy Metal CNC for the best quality products at an affordable cost.
Are you looking for the X2 CNC Fusion Kit within the shortest possible time from the leader in the market?
Is it that you require a 100% guarantee on the product and have the option to return it if not satisfied?
If so, then you look at Heavy Metal CNC.
We have years of experience in manufacturing and supplying such equipment for Table Top Mills.
We are very excited to be able to offer this kit.This has been a long time coming.
We believe it to be one of our best yet.We offer it with standard ball screws and ball nuts.
Double ball nuts, and premium C6 ball screws with double ball nuts.We also offer a full CNC turnkey machine.
Take a look on the CNC MACHINES PAGE.
Please allow 4-6 weeks for the turn key machine.The raw stock is slowly trickling in.
Hopefully there won't be any delays in shipping from our end.We hope we will start getting enough stock in to keep all of our kits stocked.The PM-30MV is now for sale.We have redesigned the G0704.
CNC Conversion Kits for the Seig X2, SX2, X2L, SX2L, and LittleMachine Shop X2D, #3990 and #4190 Harbor Freight #44991 Micro-Mark Microlux #84630
It is we at Heavy Metal CNC who can offer you Affordable CNC Machining kit while maintaining quality and timely delivery.
If you are not satisfied with our products then you can return the same without giving any clarification.
Grizzly raised the price of the machine.
So we had to as well.This NEW machine includes:3 C7 ball screws 16mm X 5mm pitch3 double ball nuts for minimal backlash2 nema 23 motors for X & Y 570 oz/in 5A 1/4" Dual Shaft Stepper Motors.1 nema 34 motor for Z.
1200 oz/in 6A stepper motorLimit switches for all axis'Pokeys57 controller that can handle up to 8 axis'.
Look at it HEREControl software is Mach4 software.
It can be viewed HEREThe software comes with a Dell touch screen Laptop with everything set up.Zero backlash helical couplings for X, Y & ZAll aluminum parts anodized to be scratch and corrosion resistant.All stainless steel hardware.It also includes the stand.The machine has been proven in.
The motors tuned and set.
This NEW machine includes:3 20mm X 5mm VXB ball screws3 VXB ball nuts.
Preloaded for minimal backlash.2 nema 34 motors.
1200 oz/in Dual Shaft Stepper Motors.1 nema 42 motor 2830 oz/inPokeys 57 breakout board.Control software is Mach4All drivers and boards are in an aluminum box with On/Off switch and Emergency Stop switch.The machine motor spindle is 220vThe software comes with a Dell touch screen Laptop with everything set up.Zero backlash helical couplings for X & Y.Z uses timing pulleysAll aluminum parts anodized to be scratch and corrosion-resistant.All stainless steel hardware.The machine has been proven in.
The motors tuned and set.
It is a plug and plays for your convenience.This comes with a one-year full warranty on everything but the laptop.Allow 4-6 weeks for delivery
Is it that you require Milling Machine CNC Conversion Kits for the Seig X3, SX3, and Grizzly G0619, and G0463 Table Top Mills?
If your requirement is so then you can depend on us at Heavy Metal CNC for the best quality products at an affordable cost.
We anodize in 5 colors.
Red, Blue, Green, Black, and Clear.We have had to add an up-charge for the Red, Blue, and Green anodize.SX2.7 includes LMS 5500, and 5550Standard Ball screws are .625" X .2" pitch with a C7 tolerance.
+/-.004 over 12"Premium Ball screws are 16mm X 5mm pitch with a C6 tolerance.
Are you looking for the X2 CNC Fusion Kit within the shortest possible time from the leader in the market?
Is it that you require a 100% guarantee on the product and have the option to return it if not satisfied?
If so, then you look at Heavy Metal CNC.
We have years of experience in manufacturing and supplying such equipment for Table Top Mills.
Our Kit includes :3 Thomson Ball Screws.
.625" X .2" Pitch C73 Thomson Ball Nuts.
Preloaded for minimal backlash.4 new thrust bearing for the X and Y axis3 ball nut blocks for mounting the ball nuts1 X axis motor mount for nema 231 Y axis motor mount for nema 231 Z axis motor mount with 2 installation brackets for nema 34All stainless steel cap screws for mounting motors4 Cap screws for installing Z axis brackets2 timing pulleys with timing belt2 Zero backlash helical couplingsAll aluminum part are anodizedNo corrosion, no oxidationScratch resistant
We are very excited to be able to offer this kit.This has been a long time coming.
We believe it to be one of our best yet.We offer it with standard ball screws and ball nuts.
Double ball nuts, and premium C6 ball screws with double ball nuts.We also offer a full CNC turnkey machine.
Take a look on the CNC MACHINES PAGE.
Please allow 4-6 weeks for the turn key machine.The raw stock is slowly trickling in.
Hopefully there won't be any delays in shipping from our end.We hope we will start getting enough stock in to keep all of our kits stocked.The PM-30MV is now for sale.We have redesigned the G0704.
This kit includes:3 VXB ball screws.
20mm X 5mm pitch3 VXB ball nuts.
Preloaded for minimal backlash.X axis motor mount for Nema 34 motorX axis ball nut block and bearing blockY motor mount for Nema 34 motorY axis ball nut blockZ motor mount for Nema 42 motorZ axis ball nut block & bearing blockZ cover plate for top of columnZ riser blocks for motor2 timing pulleys with timing belt.Zero backlash helical couplings for X, Y & Z axisStainless steel cap screws for mounting motors and ball nut blocksNew angular contact bearings for all 3 axis'All aluminum parts anodized to be scratch and corrosion resistant.Anodize clear and black only
CNC Conversion Kits for the Seig X2, SX2, X2L, SX2L, and LittleMachine Shop X2D, #3990 and #4190 Harbor Freight #44991 Micro-Mark Microlux #84630
We anodize these in 5 different colors.Green, Red, Blue, Black, and Clear.We have had to add an up-charge for Red, Blue, and Green AnodizeThe X2 and SX2 include Harbor Freight #44991, Micro-Mark #84630, and Grizzly G8689The X2L, SX2L, and X2D Also include the Little Machine Shop #3990, #4962, and #4190, and Grizzly G0781Our standard ball screws are C7.
They are .625" X .2" pitch with a tolerance of +/-.004" over 12"Anything not listed, please ask.Click on the following link for a complete electronics kit for the X2.