The M1 Carbine was designed and developed as a lighter, more maneuverable service rifle to serve as a sort of replacement for the M1 Garand.
It was also paired with a lighter cartridge, the .30 Carbine, which not only produces far less recoil than the original M1’s .30-06 Springfield, but is far, far underpowered by comparison.Despite the issues that some shooters and soldiers have taken with the .30 Carbine cartridge, the M1 Carbine is an undying, eternal design that many civilians and collectors still own and use.
If you’re in the former camp of shooters that are unsold on the M1 Carbine or have already developed a decidedly negative opinion, here are some reasons you should give the platform one more chance.1.
Depending on where you shop, you might be able to get it as low as 50 cents a round, or even cheaper.
The reality of the situation is that most (if not all) contemporary M1 Carbine owners won’t be relying on this round to stop enemy combatants.
The M1 Carbine is available in a wide range of variantsThe M1 Carbine was produced in a number of different variants, such as the M1A1, the M2 and the M3.
Many of you looking through this are probably looking for Springfield parts for a Springfield 1903, despite the fact that Springfield Armory has been a prime producer of some of the most reliable firearms in the country, over more than the last century.
In addition to the legendary M1903, Springfield has created and successfully marketed a wide range of extremely popular rifles and pistols over the past hundred years, including but not limited to the M1A rifle, 1911 Series Pistols and a range of other 9mm handguns that are popular around the country.Whatever your Springfield firearm of choice, you’ll need to keep a variety of essential Springfield parts on hand to make repairs or upgrades as they become necessary, and if you don’t feel the need to, you’ll want to.A stock is one of the most basic, unarticulated parts of a rifle like the iconic 1903.
Even if your rifle is a part of a historical collection or is simply a safe queen, dry rot and other issues can lay a stock to waste.
Stocks, like barrel bands and sling mounts, are easy to replace and necessary, despite the fact that they might not be the first part that most Springfield owners think of when they think of replacements.A bolt, whether it is stripped or contains all of the necessary internals, is another critically important component of a Springfield rifle.
You can also replace springs, firing pins and extractors piecemeal in order to restore functionality to a rifle.Trigger groups are also essential to the health and operability of rifles and handguns.
In fact, triggers are one of the few parts that have remained a near constant in firearms throughout the hundreds of years that they have developed.
Mauser rifles have been famous for the better part of the last century for their reliability.
Some Mausers produced nearly 100 years ago that have been well kept are just as serviceable today as they were the day they were created.
Without it, their performance will suffer or fail entirely.
While a Mauser bolt action can last over 100 years with proper care, even with care, you’ll need to replace some components with the proper Mauser parts.For example, the extractors, which are a part of the action, will eventually fail or completely break.
Excess moisture can cause rot, and different circumstances can cause dry rot.
Even a well-cared-for rifle may need its stock replaced after 40 or 50 years.The basic point here is that while the overall Mauser itself may remain a functional machine for much longer than expected, keeping it operational may require you to perform a bit of service to keep it all running smoothly.
Unless you shoot a wheelgun or a single shot handgun, then the magazines you pair with your firearms are central to your shooting success.
For semi automatic shooters - which constitutes the majority, perhaps even the vast majority, of handgun owners and shooters - then the quality and reliability of the magazines you use will impact your effectiveness behind the platform.In some instances, the search for pistol magazines for sale might begin with the lack of one altogether.
Although it’s not a common occurrence, it could be theoretically possible that a used pistol or a surplus pistol was sold sans magazine, just the same way that some other used guns are sold without chokes or grips or sights.
The failure of a pistol’s magazine will mirror the circumstances of the previous paragraph, and a new magazine will be required to restore the basic, semi-automatic functionality of a handgun.The latter scenario entails a practical need for a spare or a set of spare gun magazines, which are expressly useful for several different individual reasons.
A spare loaded mag can be the difference between another round and an empty chamber, which can be, in some instances, a matter of life and death.Once you reach the conclusion that it is worth the investment of your time to find a new magazine for your pistol, there are a couple of ways to go about it.
You can see if you can find another original, produced by the same manufacturer that made the magazine that came with your pistol.
The M1 Carbine is a lightweight rifle chambered in .30 Carbine that was developed during World War II to serve as a replacement for its larger, better-known cousin, the M1 Garand.
Although the M1 Carbine was underpowered by comparison, it was lightler, more maneuverable, and developed in a number of variants, including a selective fire version and a variant designed with a folding stock that was developed for airborne troops.It also served with distinction throughout the Second World War, the Koream Conflict, and Vietnam, and its widespread use and central role in American military history have made it an enduring emblem.However, although some reproductions are currently still available from Auto Ordnance and Inland Manufacturing, there are enough original M1 Carbines in circulation to warrant a healthy demand for M1 Carbine parts.
Many of these firearms are 70 years old or older, and restoring originals to a state of operable functionality takes experience, knowledge, and of course, the right parts.It’s worthwhile for you to keep a trigger assembly on hand, because even if you never have the express need to replace the entire assembly, you can swap out springs and parts to make quick repairs in case anything ever fails.It’s also valuable to keep a complete bolt assembly in reserve, as some of the finest, most minute working parts of the action are contained in the bolt.
You could have lost or broken extractors, ejectors or firing pints, and a complete bolt assembly will have you better prepared with all the M1 parts you need locked up in the action and ready to be repaired or swapped out.A spare M1 Carbine barrel is another highly valuable part to keep on hand, and many firearms have suffered damage due to inadequate cleaning or maintenance.
In fact, even a barrel that has been well cared for will need to be replaced eventually anyway, as old barrels may have the lands in their rifling worn down.
A rifle that has seen action or use and is 60 or even 70 years old - with an original barrel - will no doubt have seen its share of wear as well.If your M1 Carbine will cock and shoot but will not cycle properly, you could be experiencing a problem with your gas ports, piston or slide.
Much like getting a new car, there is something enjoyable about that new look and feel, even if it comes with an action that needs to be broken in and sights and a trigger that need to be adjusted.You won’t get that new feel from most of the surplus handguns for sale featured in this list, but you will get reliable tools that, when properly cared for, can be some of the hardest workers in your collection.Sig Sauer P226If you’ve ever been gazing in admiration at the handsome, yet somehow demure-looking matte black service pistol on the hip of a police officer, there is a decent chance your attention was captivated by a Sig P226.These pistols are ho-hum in appearance only, and are some of the most reliable, durable handguns ever produced.
They are also popular with law enforcement around the world, which means they are commonly encountered in surplus markets.TT-33 TokarevThe TT-33 Tokarev is another handgun that’s highly sought after in surplus markets.
Don’t let the .32 cal designation fool you - the 7.62mm Tokarev generates average muzzle velocities of around 1,500 FPS and packs a punch of 400 ft-lbs.CZ-52Another pistol that chambers the 7.62x25mm Tokarev round is the CZ-52, which was one a service pistol among Czechoslovakian forces.
Apparently, they are getting harder to come by nowadays, but since the ammo is readily available, these are still popular pistols.Beretta 92 Similar in appearance and function to the Sig P226 is the Beretta 92, which has also been widely used as a service pistol by police.It features a single/double action and has been produced in three chamberings, although if you come across one it’s probably going to be a 9mm model.
They’ve been praised for their heft and reliability that do not interfere with surprisingly ergonomic comfort.Mosin-Nagant M1895 Revolver Finally, for you wheelgun lovers, we propose a search for a Mosin-Nagant M1895.
That’s right, Mosin-Nagant didn’t just produce their infamous rifles, and this revolver, chambered in 7.62mm Nagant, was in service for more than 50 years.
Mauser rifles have been famous for the better part of the last century for their reliability.
Some Mausers produced nearly 100 years ago that have been well kept are just as serviceable today as they were the day they were created.
Without it, their performance will suffer or fail entirely.
While a Mauser bolt action can last over 100 years with proper care, even with care, you’ll need to replace some components with the proper Mauser parts.For example, the extractors, which are a part of the action, will eventually fail or completely break.
Excess moisture can cause rot, and different circumstances can cause dry rot.
Even a well-cared-for rifle may need its stock replaced after 40 or 50 years.The basic point here is that while the overall Mauser itself may remain a functional machine for much longer than expected, keeping it operational may require you to perform a bit of service to keep it all running smoothly.
The M1 Carbine was designed and developed as a lighter, more maneuverable service rifle to serve as a sort of replacement for the M1 Garand.
It was also paired with a lighter cartridge, the .30 Carbine, which not only produces far less recoil than the original M1’s .30-06 Springfield, but is far, far underpowered by comparison.Despite the issues that some shooters and soldiers have taken with the .30 Carbine cartridge, the M1 Carbine is an undying, eternal design that many civilians and collectors still own and use.
If you’re in the former camp of shooters that are unsold on the M1 Carbine or have already developed a decidedly negative opinion, here are some reasons you should give the platform one more chance.1.
Depending on where you shop, you might be able to get it as low as 50 cents a round, or even cheaper.
The reality of the situation is that most (if not all) contemporary M1 Carbine owners won’t be relying on this round to stop enemy combatants.
The M1 Carbine is available in a wide range of variantsThe M1 Carbine was produced in a number of different variants, such as the M1A1, the M2 and the M3.
Unless you shoot a wheelgun or a single shot handgun, then the magazines you pair with your firearms are central to your shooting success.
For semi automatic shooters - which constitutes the majority, perhaps even the vast majority, of handgun owners and shooters - then the quality and reliability of the magazines you use will impact your effectiveness behind the platform.In some instances, the search for pistol magazines for sale might begin with the lack of one altogether.
Although it’s not a common occurrence, it could be theoretically possible that a used pistol or a surplus pistol was sold sans magazine, just the same way that some other used guns are sold without chokes or grips or sights.
The failure of a pistol’s magazine will mirror the circumstances of the previous paragraph, and a new magazine will be required to restore the basic, semi-automatic functionality of a handgun.The latter scenario entails a practical need for a spare or a set of spare gun magazines, which are expressly useful for several different individual reasons.
A spare loaded mag can be the difference between another round and an empty chamber, which can be, in some instances, a matter of life and death.Once you reach the conclusion that it is worth the investment of your time to find a new magazine for your pistol, there are a couple of ways to go about it.
You can see if you can find another original, produced by the same manufacturer that made the magazine that came with your pistol.
The M1 Carbine is a lightweight rifle chambered in .30 Carbine that was developed during World War II to serve as a replacement for its larger, better-known cousin, the M1 Garand.
Although the M1 Carbine was underpowered by comparison, it was lightler, more maneuverable, and developed in a number of variants, including a selective fire version and a variant designed with a folding stock that was developed for airborne troops.It also served with distinction throughout the Second World War, the Koream Conflict, and Vietnam, and its widespread use and central role in American military history have made it an enduring emblem.However, although some reproductions are currently still available from Auto Ordnance and Inland Manufacturing, there are enough original M1 Carbines in circulation to warrant a healthy demand for M1 Carbine parts.
Many of these firearms are 70 years old or older, and restoring originals to a state of operable functionality takes experience, knowledge, and of course, the right parts.It’s worthwhile for you to keep a trigger assembly on hand, because even if you never have the express need to replace the entire assembly, you can swap out springs and parts to make quick repairs in case anything ever fails.It’s also valuable to keep a complete bolt assembly in reserve, as some of the finest, most minute working parts of the action are contained in the bolt.
You could have lost or broken extractors, ejectors or firing pints, and a complete bolt assembly will have you better prepared with all the M1 parts you need locked up in the action and ready to be repaired or swapped out.A spare M1 Carbine barrel is another highly valuable part to keep on hand, and many firearms have suffered damage due to inadequate cleaning or maintenance.
In fact, even a barrel that has been well cared for will need to be replaced eventually anyway, as old barrels may have the lands in their rifling worn down.
A rifle that has seen action or use and is 60 or even 70 years old - with an original barrel - will no doubt have seen its share of wear as well.If your M1 Carbine will cock and shoot but will not cycle properly, you could be experiencing a problem with your gas ports, piston or slide.
Many of you looking through this are probably looking for Springfield parts for a Springfield 1903, despite the fact that Springfield Armory has been a prime producer of some of the most reliable firearms in the country, over more than the last century.
In addition to the legendary M1903, Springfield has created and successfully marketed a wide range of extremely popular rifles and pistols over the past hundred years, including but not limited to the M1A rifle, 1911 Series Pistols and a range of other 9mm handguns that are popular around the country.Whatever your Springfield firearm of choice, you’ll need to keep a variety of essential Springfield parts on hand to make repairs or upgrades as they become necessary, and if you don’t feel the need to, you’ll want to.A stock is one of the most basic, unarticulated parts of a rifle like the iconic 1903.
Even if your rifle is a part of a historical collection or is simply a safe queen, dry rot and other issues can lay a stock to waste.
Stocks, like barrel bands and sling mounts, are easy to replace and necessary, despite the fact that they might not be the first part that most Springfield owners think of when they think of replacements.A bolt, whether it is stripped or contains all of the necessary internals, is another critically important component of a Springfield rifle.
You can also replace springs, firing pins and extractors piecemeal in order to restore functionality to a rifle.Trigger groups are also essential to the health and operability of rifles and handguns.
In fact, triggers are one of the few parts that have remained a near constant in firearms throughout the hundreds of years that they have developed.
Much like getting a new car, there is something enjoyable about that new look and feel, even if it comes with an action that needs to be broken in and sights and a trigger that need to be adjusted.You won’t get that new feel from most of the surplus handguns for sale featured in this list, but you will get reliable tools that, when properly cared for, can be some of the hardest workers in your collection.Sig Sauer P226If you’ve ever been gazing in admiration at the handsome, yet somehow demure-looking matte black service pistol on the hip of a police officer, there is a decent chance your attention was captivated by a Sig P226.These pistols are ho-hum in appearance only, and are some of the most reliable, durable handguns ever produced.
They are also popular with law enforcement around the world, which means they are commonly encountered in surplus markets.TT-33 TokarevThe TT-33 Tokarev is another handgun that’s highly sought after in surplus markets.
Don’t let the .32 cal designation fool you - the 7.62mm Tokarev generates average muzzle velocities of around 1,500 FPS and packs a punch of 400 ft-lbs.CZ-52Another pistol that chambers the 7.62x25mm Tokarev round is the CZ-52, which was one a service pistol among Czechoslovakian forces.
Apparently, they are getting harder to come by nowadays, but since the ammo is readily available, these are still popular pistols.Beretta 92 Similar in appearance and function to the Sig P226 is the Beretta 92, which has also been widely used as a service pistol by police.It features a single/double action and has been produced in three chamberings, although if you come across one it’s probably going to be a 9mm model.
They’ve been praised for their heft and reliability that do not interfere with surprisingly ergonomic comfort.Mosin-Nagant M1895 Revolver Finally, for you wheelgun lovers, we propose a search for a Mosin-Nagant M1895.
That’s right, Mosin-Nagant didn’t just produce their infamous rifles, and this revolver, chambered in 7.62mm Nagant, was in service for more than 50 years.