Updating Windows have several benefits, but it can cause some issues as well. One such issue is unable to connect to the internet after a Windows update. So, here are the steps to get back online after a Windows 10 update breaks the internet access.
Source:-How to Get Online After Windows 10 Update Breaks Internet Access?
To Run Basic Network Fixing
Rebooting System:
- First and foremost, you have to go to Start on your system.
- After that, you should select a Power tab.
- Now, go to Restart.
Check Network Configuration:
- To get started, go to the Start on your system.
- Then you should browse Command Prompt and select the first result launch the console.
- Then enter the pursuing the command to locate the router’s TCP/IP address and hit the Enter key: ‘ipconfig.’
- You have to verify the address of ‘Default Gateway.’
- Enter the pursuing command to verify the router is accessible and hit the Enter key: ‘ping ROUTER-IP.’
Rebooting Wi-Fi Connection:
- Go to the Settings options on the system.
- Then you should choose Network & Internet.
- Navigate to the Wi-Fi option.
- You have to switch the toggle of Wi-Fi to disable it.
- Later, switch the Wi-Fi toggle to enable it.
- Go to Show available networks.
- You should choose a wireless network.
- Thereafter select Connect.
- You have to input a wireless password.
- Now, navigate to Next.
Turning off Airplane Mode:
- Navigate to the Settings on your system.
- Then select the Network & Internet option.
- You should choose Airplane mode.
- Thereafter switch the Airplane mode toggle to disable it.
- Alternatively, reboot the system.
Reboot the Router:
- You should find the router.
- Thereafter detach its power cable.
- You have to wait for 60 seconds.
- Now, connect the power cable again.
Troubleshoot Connectivity via Network troubleshooter
In case you intend to troubleshoot connectivity through troubleshooter, go through the below-mentioned steps.
- Go to the Setting on your system.
- Then select the Update and Security option.
- Beneath ‘Get up and running’ field, choose Internet Connections troubleshooter.
- Navigate to Run the troubleshooter option.
- You should choose to Troubleshoot my collection to the internet.
- Thereafter go to ‘Try these repairs as an administrator.
- You have to go carry on with the on-screen instructions.
Resetting Network Stack via Command Prompt
If you would like to reset network stack via Command Prompt, then abide by the given steps.
- You have to go to the Start logo on your system.
- Thereafter browse for ‘cmd,’ right-click on the first result and then choose Run as administrator.
- You should enter the pursuing command to reset the function which controls network requests for applications and hit the Enter key: netsh winsock reset.
- Input the pursuing command to reset the internet protocol stack and hit the Enter key: netsh int ip reset.
- Go to the pursuing command to again configure the network settings and hit the Enter key: ipconfig /renew.
- Enter the pursuing command to remove the DNS details cached on the device and hit the Enter key: ipconfig /flushdns.
- Finally, reboot the system.
Resetting Network Adapter via Settings
In case you intend to reset network adapter via settings, go through the below-mentioned steps.
- To begin with, go to the Settings on your system.
- Thereafter select the Network and Internet option.
- Navigate to the Status.
- Beneath ‘Change your network settings’ field, select Network reset.
- You should go to Reset now.
- Then choose the Yes option.
Updating Network Adapter Driver via Device Manager
- Navigate to the Start on the system.
- You should browse for Device Manager and select the first result to launch the application.
- Thereafter open Network adapters branch.
- Go to the adapter with the issue and right-click on it, then choose Update Driver.
- You have to select ‘Search automatically for updated driver software.’
- Now, carry on with the on-screen steps.
Install Network Adapter Driver via Device Manager
In case you intend to install a network adapter driver via device manager, go through the below-mentioned steps.
- You should click on the Start on your system.
- Browse for the Device Manager and select the first result to launch the application.
- You have to open Network adapters branch.
- Go to the faulty adapter and right-click on it, then choose Update Driver.
- You should select ‘Browse my computer for driver software.’
- Choose the Browse option.
- You have to choose a folder wherever you disclosed the files of the driver.
- Navigate to the OK option.
- You should tick Include subfolders.
- Click on the Next option.
- Now, carry on with on-screen steps.
Roll Back Network Adapter Driver via Device Manager
If you would like to roll back the network adapter via Device Manager, then abide by the given steps.
- Firstly, you have to click on the Start on your system.
- Browse for the Device Manager and select first result to launch the application.
- You should choose Network adapters branch.
- Go to the faulty adapter and right-click on it and choose Properties.
- You have to select Driver button.
- Navigate to Rollback driver.
- Select OK.
- Select the reason for rolling back.
- Then choose the Yes option to confirm.
- Now, reboot the system.
Uninstalling Network Adapter Driver via Device Manger
In case you intend to uninstall the network adapter driver via device manager, go through the below-mentioned steps.
- Click on Start on your system.
- You should browse for the Device Manager and select first result to launch the application.
- Open Network adapters branch.
- Go to the faulty adapter and right-click on it, then choose Uninstall device.
- You should select Uninstall option.
- Now, reboot the system.
Turning off Security Applications to Troubleshoot Network problems on Windows 10
Disable Antivirus:
- You should click on the Start on your system.
- Then browse for the Windows Security and select first result to launch the application.
- You have to select the Virus and threat protection option.
- Beneath ‘Virus and threat protection settings’ field, select manage settings.
- You should switch the Real-time protection toggle to disable it.
Disable Firewall:
- You should click on the Start on your system.
- Thereafter browse for the Windows Security and select first result to launch the application.
- Navigate to the Firewall and network protection.
- Select the network with a label of ‘active.’
- Switch Windows Defender Firewall toggle to disable it.
Uninstalling Recent Update
- Click on the Start on your system.
- Then select the Update and Security option.
- You should choose Windows Update.
- Navigate to View update history option.
- Select Uninstall updates.
- You have to choose most current update causing networking issues.
- Go to Uninstall.
- Later, choose Yes.
- Now, select Restart.
Harry Martin is a creative person who has been writing blogs and articles about cybersecurity. She writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. Her articles have been published in many popular e-magazines, blogs, and websites.