UPDATED SMARTERS CUSTOM IPTV WINDOWS APP

Computer viruses are a security threat and also cause several errors like “ERROR_VIRUS_INFECTED.” This error mainly followed by the “Operation did not complete successfully because the file contains a virus” notification.

In this article will show you how you can easily fix this issue with possible solutions and convenient methods: How to Fix Operation Did Not Complete SuccessfullyChange AntivirusRemoving your antivirus from your operating system is not the best fix, but it can help to fix this issue.

However, sometimes Defender causes the operation did not complete the error.To fix this issue, you need to disable Windows Defender properly on your system.Here are the steps to follow:Tap the Windows + I button on your keyboard to launch the settings application on your device.Under the Settings, select the “Update and security” option, in the left pane, move to the “Window Defender,” and then in the right pane click “Real-time Protection.”After the above process, Window Defender will turn off, and you can run your file without any issue.To completely turn off Windows Defender, you have to edit the registry.Here are the steps to follow:Tap the Windows + R button to open the run command prompt.In the Run command –line type “Regedit” and then tap the “Enter” button or tap “OK.”In the left pane you need to move on:HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defenderkey.

Locate “DisableAntiSpyware DWORD” in the right pane.

Now type “DisableAntiSpyware” as the new name of DWORD and then double-tap on it.Set the value from 0 to 1 and then click “OK” to save your changes.After the above process Windows Defender will permanently turn off, and you can’t see this error on your device again.If you don’t wish to edit your registry, you can turn off Windows Defender via “Group Policy Editor.”Here are the steps to follow:Tap the Windows + R button on your keyboard and then type “gpedit,msc.” And then, hit the “Enter” button or tap “OK.”When the Group Policy editor appears on the screen, navigate to the left pane and select “Computer Configuration” click “Administration Template” hit Windows Computer” and then click “Windows Defender.In the right pane double-tap on Disable Windows Defender.”Click the “Enable” button and then select “Apply” and hit “OK” to save your changes.Now restart your PC and check for improvement.Add Problematic File into Exclusion ListIf you are facing this error when you are trying to access any files, it is possible that there is a problematic file.

Simply add it to the Exclusion list to fix the problem.Reinstall Antivirus“Operation did not complete successfully” error may occur due to improper installation of antivirus.

Want to keep your PC malware free?

Then download Malwarebytes 100% free malware removal tool for Windows 7, Windows 8, or Windows 10 PC.

Malwarebytes is a good Windows malicious software removal tool.Read full story here

This post mainly about to fix the Windows update error 8024001f and related error windows update errors in windows 10/8 operating system.

These steps should help with all errors and not just the ones listed.

Disclaimers: Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method.

In case if something goes wrong, we can restore your computer to the same stage and fix the issues.

In case Windows 10 automatically download the new drivers or you install the new drivers from the downloaded manufacture’s website.to identify your hardware drivers and find suitable drivers from the manufactures and updated manually.

After Windows Update stops, right-click Windows Update, and then select Start.

While trying to take printouts on Windows XP, an error message emerges signifying that the memory is not sufficient It may emerge before another error, which may be relating to a file missing, so locating and reinstalling that will Troubleshoot Printer Issues on Windows PC.

This can be as irritating as encountering and having to find a printer offline fix for Windows.

How to fix sage 50 error code 1402Sage 50 Error 1402 – Sage 50 is a business accounting software program that assists small and medium-sized organizations with handling their price range smartly.This article will offer you with the stairs which you should comply with to clear up the Sage 50 Error 1402.Causes of sage 50 error code 1402:Sage 50 Error 1402 is due to inconsistencies within side the settings of the Windows registry.

Every time you begin up a procedure on sage 50, the error code 1402 begins off evolved displaying.

These outcomes within side the software program crashing.

Your machine may also begin putting as wellAlso Read: How to fix sage-50 decline code error 14Steps to Resolve Sage 50 Error 1402In case you experience this error, press CTRL + ALT + DEL and give up the processes associated with Sage 50.

The registry continues critical settings which might be associated with home windows and different installed software program.For the initial step of the procedure, you'll want to navigate to the Start menu at the taskbar.Then, click on at the Run alternative or press the Windows Key and R for your keyboard.The Run Command window will display up after you carry out the previous step.Type in regedit after which click on OK In the quest field.Next, the Registry Editor window will open up for your screen.Browse to the location supplied below.

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\ComponentsAfter that, right-click on at the Components choice after which click on at the PermissionsNow, you'll want to press at the AdvancedDoing so will open up the Advanced Security Settings for the Components’ window.Then, navigate to the OwnerNote down the modern-day owner.Navigate to the Change owner segment and spotlight the present day User who's logged in.Click at the checkbox for the Replace owner on sub-containers & objects Navigate to the ApplyOnce you get hold of the Registry Editor, you is probably not able to set owner on the important thing which is chosen currently.

If your Windows Defender causes up an error notification saying “item skip during the scan,” then the issue occurred due to an item being missed during the scan.

If you have disabled network scanning on your device, then you can also face this issue.

The application settings does not have the ability to control the scanning of your network settings.

To fix this, you might be needed to enable networking scanning on Windows Defender.How to Enable Network Scanning in Windows DefenderIn this article we will show you how you can enable network scanning in windows defender with three ways and each method will permit network scanning:PowerShellGroup PolicyRegistry EditorAll these methods are depending on which windows version you are using, and you can select one from the above methods.1) PowerShellStart PowerShell along with the admin account.Enter and confirm the command:Set-MpPreference –DisableScanningNetworkFiles 0There is no other output for this command, so you need to copy a file from your network and check you fix this error.If you wish to disable it, then you need to set it 1.2) Group PolicyHere are the steps on how to enable Network scanning in Windows Defender through Group Policy:Launch the group policy editor and the visit to Computer configuration.Tap Administrative temples.Hit Windows components.Tap Windows Defender Antivirus.Tap Scan.Double-tap “Scan network files” and then set it to “Enabled.”Tap Ok.When you have enabled this service, all network files will be scan automatically.Remember that the default setting cannot scan any network files.3) Registry EditorWhen you are using Windows Home, you can also try to check registry value in the group policy that is not available for you.Here you need to launch registry editor and move to:Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows DefenderRight-tap on “Windows Defender” and generate a folder key with the name “Scan” in the scan option.

Here you have to create a new DWORD with “DisableScanningNetworkFiles” and then set it to “0” to enable the scanning.Turn off the Registry.Next, you need to copy the file network; it will automatically scan.You can also copy the shortcut key and import it into another PC to apply rapidly.John Smith is a creative person who has been writing blogs and articles about cybersecurity.

He writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users.

Homegroup is a beneficial feature for Windows users asit helps share data between different systems.However, there are instances when users report getting anerror code “Windows can’t set up a homegroup on this computer.” So, if you are facing this same error, then read this article and follow the instructions given below.SOURCE:-How to Fix “Windows can’t set up a homegroup on this computer” Error?Enable Windows Troubleshooter to Identify the IssueIf the users are trying to enable Windows troubleshooter to identify the issue, then they should carefully apply the given steps.Navigate to the Windows Search on your PC.After that, input ‘settings’ into it and hit the Enter key.Then launch the option of Windows Settings and input ‘troubleshoot’ into the text section.You will be given a menu of drop-down section.Click on the option of Troubleshoot.You have to find the ‘Homegroup’ under ‘Find and fix other problems.’Click on it then select ‘Run the troubleshooter.Now, you have to wait to finish the process.Remove idstore.sst FileIn case you intend to remove idstore.sst file from the system, then you can opt to follow the below-mentioned guidelines.Reach the Windows logo section on your system.After that, enter ‘cmd’ into it and hit the Enter key to launch the Command Prompt.You should click on the option of Command Prompt.Select the ‘Run as administrator.’Thereafter, input ‘net stop p2pimsvc /y’ into it once the cursor blink and press the Enter button.After that, launch the File Explorer on the PC.You should proceed with this: C:\\Windows\\ServiceProfiles\\LocalService\\AppData\\Roaming\\PeerNetworking.Once you get a notification claiming that “You don’t currently have permission to access this folder” and then click on the Continue option.Locate the folder of ‘PeerNetworking’ by yourself.You should check for ‘idstore.sst’ and right-click on it.Then select the option of ‘Delete’ within the list of the drop-down.Now, restart the Windows system and check whether the issue has been fixed.Check Peer Networking Grouping ServiceIf the users are trying to check the Peer Networking Grouping service, then they should carefully apply the given steps.Navigate to the Windows Search section on your system.After that, input ‘run’ into it and hit the Enter key to launch the Run section.Then you should enter ‘services.msc’ into it and hit the OK button.You will reach the screen of Windows Services.

Reach the ‘local services directory’ the discover Homegroup listener, Peer network grouping, Homegroup provider, Peer network identity manager.Thereafter, check whether the mentioned services are turned on or adjust to the Automatic option.Otherwise, reach the Startup type then click on the Automatic option within the menu of the drop-down.Now, let the Homegroup and attempt to make a fresh one.Check the System is Connected with the Similar Network as the HomeGroupIn case you intend to check the system is connected, then you can opt to follow the below-mentioned guidelines.Navigate to the Windows Search on your system.After that, input ‘cmd’ into it and Enter key to launch the Command Prompt.Then type ‘ipconfig’ into it and press the Enter button once the cursor blink.Now, look whether the top 3 similar parts of the IP on every system of HomeGroup.Enable IPv6If the users are trying to enable IPv6, then they should carefully apply the given steps.Navigate to the Windows Search on your system.Thereafter input ‘control panel’ into it and hit the Enter key.You should enter the Control Panel and locate the Network and Internet option.Then click on the option of ‘View network status and tasks’Click on the connection.After that, the status connection screen will launch on your system and continue to Properties option.Now, you will see a fresh screen.There find the ‘Internet Protocol Version (IPv6)’ and mark the tickbox.Now, click on the OK button to apply the changes.Jack Arona is a Microsoft Office expert and has been working in the technical industry since 2002.

As a technical expert, Billy has written technical blogs, manuals, white papers, and reviews for many websites such as office.com/setup.

While updating your Windows 10 operating system to the latest version, you might face certain issues such as Windows update cannot check for current updates.

This error occurs on your device because of several reasons.

In this article, we will show you how you can fix this issue on your device with easy steps.Edit RegistryHere are the steps on how to edit the registry:Tap Windows+ R hotkey on your keyboard and in the search tab type “Regedit” and then tap “Enter button or tap “OK.”When the registry editor launches, move to the command “Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update in the left pane.”Right-tap on “Auto-update” and then select “Export” in the dropdown menu.Here you can enter your desired name for File, select save location, and then tap on “Save” option.In this situation, if anything goes incorrect while modification, then you need to run this File to restore it.Here you need to enable the “Auto Updates” button that appears in the left pane, here you need to search for the “Reboot required” button.If it is available “Reboot required” then right-tap on it and then select “Delete” in the dropdown menu.Now tap “Yes” on the configuration dialogues that appear on your screen.Make Sure Time and Date CorrectIf you are receiving Windows updates cannot check current updates, notification on your device while updating Windows10.

Might be this issue occurs due to your incorrect time and date or problem with date and time on your operating system.Here are the steps on how to check time and date correct on your device:Right-tap on the clock symbol on your “Taskbar” and then select the “Adjust time and date” button on the dropdown menu.Now find the “set time automatically” button and disable this feature.

Now wait for a couple of minutes and then turn on features again.After the above process, you need to reboot your operating system and then try to update your Windows or check for improvement.Necessary Service Running On Your DeviceHere are the steps on how to check necessary service running on your device:Click Windows+ R key on your keyboard and then type “service.msc” in the search tab and then tap”Enter “ button on your keyboard or tap “OK.”In the service windows, find “background intelligent transfer service” and the double-tap on it to view Properties.Set Automatic from “startup type” and then tap “Apply” and hit “OK” to save your changes.Double-tap on “Windows Updates” and then change to startup type from automatic.After the above process, you need to start Windows service and “Back intelligent Transfer” service.Delete Windows Corrupted FileHere are the steps on how to delete Windows corrupted File:Launch the File Explorer and move to “C:\Windows\SoftwareDistribution\DataStore\Logs” directory.Fine “edb.log” files and then delete or rename it.Here are the steps on how to delete or rename files:Click Windows + I hotkey to launch the settings application.In the settings option tap on “Updates and security.”Click “Recovery” features in the right hand and then tap on “Restart now” option.Here you can view a list where you need to select Troubleshoot, hit advanced option and then hit Startup settings.Now you need to click on the “Restart” option.Here you will see a list appear on your screen with several options.

Tap on the safe mode version that you wish to use by tapping on the appropriate buttons.Reset Windows Updates ToolsHere are the steps on how to reset Window updates tools:Tap Windows and x key to launch a command prompt as administrator.

When users install the cumulative updates on Windows 10, they might get reported with the 0x8024500c error code.

In general, the above error code shows that the Windows service related to the Windows Update is stopped or restricted due to some reasons.

But you can still download the Windows Updates manually via the official site of Microsoft.

All you need to do is follow the steps given down here–Tap the Start key & then head to Settings.Head to Update & Security.Go to the right panel and press on View Update History.Now you have to find the Quality Updates option and then locate the KB number, which appears to be failed during automated installation.After that, head to Microsoft Download Center & then head to the search bar.Locate the cumulative update edition.Once you find it, download and install the update.Fix 2: Ensure Windows Update Services is RunningThe following details will help you to check the Windows 10 Update services as well as fix the one which is not running:  Go to the Start menu and search for Run.Now select the same from results.Enter services.msc into the dialogue box following by the Enter key on your keyboard.When Windows Services appears, find the service mentioned below–Delivery OptimizationBackground Intelligent Transfer Service (BITS)Windows Update Medic ServiceWindows UpdateIn case if any of the above Windows services seem stopped or disabled, you will be required to enable or start it.

When you start the troubleshooter, it would automatically find the issue, and might it also fix the ongoing issues by itself.

Here are the instructions to run the Windows Update Troubleshooter:Press on notification icon located on the right-end on your PC’s Taskbar.Now head to All settings.Head to the Update & Security option.Now press on Troubleshoot.Find the Windows Update link.

If you are facing the issue as well, then read through the blog to fix it.

So, here are the steps to fix x800c0002 error while updating Windows 10.Launch Windows Update TroubleshooterAfter installing when you launch it, identify the issue, and solve it.

However, not all issues should be able to resolve with this software.

When it does not guide, you should take the second process.Reset Windows Update ComponentsIn case you intend to reset Windows update components,’ then go through the below-mentioned steps.You should select Win + X keys.

From the menu, select Command Prompt.You must prevent the BITS, MSI Installer, Cryptographic, and the Windows Update Services by running these commands to the command pop-up.

Remember to press the Enter key after every command: net stop wuauservnet stop cryptSvcnet stop bitsnet stop msiserverThe next needs further SoftwareDistribution and Catroot2 folders with the command pop-up.