Sachiya Steel International is one of the prominent Manufacture and Exporter of high quality Stainless Steel 317 Angle, where high quality of raw materials is used in manufacturing these products. The main requirement for Stainless Steel 317 Angle is that they should be corrosion resistant for a specified application or environment. The selection of a particular Stainless Steel 317 C-Channel must initially meet the corrosion resistance requirements. Stainless Steel 317 H-Beam is austenitic chromium – nickel steels with high strength and excellent corrosion resistance.
Stainless Steel 317 I-Beam are used in fluidised bed combustors, kilns, and radiant tubes, tube hangers for petroleum refining and steam boilers, coal gasifier internal components, lead pots, thermowells, refractory anchor bolts, burners. Additional mechanical or physical properties of Stainless Steel 317 T-Beam may also need to be considered to achieve the overall service performance requirements. Stainless Steel 317 Chain is extensively used for conveyance of fluids intended processes involving critical high – temperature applications.
Stainless Steel 317 Angle | Stainless Steel 317 Angle | Stainless Steel 317 Angle | Stainless Steel 317 Angle | Stainless Steel 317 Angle | Stainless Steel 317 Angle | Stainless Steel 317 Angle | Stainless Steel 317 Angle | Stainless Steel 317 Angle
Our offered 317 Stainless Steel Angle are used in under similar service conditions in heat transfer process equipment like boilers, super heaters, heat exchangers and condensers. 317 Stainless Steel Chain also offers higher creep, stress to rupture and tensile strength at elevated temperatures, in addition to excellent corrosion resistance and strength properties. 317 Stainless Steel C-Channel is offered in varied shapes and sizes and is appreciated for its durability and toughness. These fittings can be customized as per client’s specifications.
SS 317 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705M |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| SS 317 Angle |
: | 5mm to 9mm |
| SS 317 Channel |
: | 40mm*20mm~300mm*300mm |
| SS 317 Beam | : | 3″ thru 12.31″ |
| SS 317 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
317 Stainless Steel Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 317 | 0.08 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 18 – 20 | 3.0-4.0 | 11.0-15.0 | 57.845 min |
Stainless Steel 317 Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 317 Stainless Steel Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 317 | 1.4449 | S31700 | SUS 317 | – | – | – | – |
SS 317 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the well-established Manufacture and Exporter of high quality Stainless Steel 317 Wire Mesh, which is used to avoid corrosion problems caused by welding.
SS 317 Hexagonal Wire Mesh exhibits great resistance to chloride pitting and crevice corrosion because of high molybdenum content and nitrogen additions, and the higher nickel content ensures better resistance to stress – corrosion cracking versus the 300 series.
The higher alloy content of super austenitic SS 317 Welding Wire Mesh makes them more expensive.Stainless Steel 317 Netting Wire Mesh is used in pressure vessels but is a low – alloy carbon steel with a chromium content of 0.5 % to 9 %.
Stainless Steel 317 Woven Wire Mesh is preferred where biocompatibility is required (such as body implants and piercings).
Stainless Steel 317 Spring Steel Wire Mesh reduces the sensitization effect (precipitation of chromium carbides at grain boundaries) caused by the high temperatures involved in welding.SS 317 Fencing Wire Mesh generally has better engineering properties than austenitic grades, but has reduced corrosion resistance, because of the lower chromium and nickel content.
317 Stainless Steel Wire Mesh are also usually less expensive, which can offer similar performance at lower cost and are preferred in certain applications.
Sachiya Steel International is one of the well-known Manufacture and Exporter of Stainless Steel 410 Angle, which is also characterized by high ductility and impact strength.
Stainless Steel 410 Angle is an austenitic stainless steel offering an excellent resistance to inter – granular corrosion following exposure to temperatures in the chromium carbide precipitation range from 800 Degree to 1500 Degree F. Stainless Steel 410 C-Channel is well suited for applications related to chemical processing, heat exchangers, desalinization and more.
With its high levels of chromium, molybdenum, and nitrogen, Stainless Steel 410 H-Beam has excellent resistance to a wide range of chemicals.Stainless Steel 410 I-Beam is especially suited for high chloride environments such as brackish water, seawater, pulp mill bleach plants and other high chloride process gicstreams.
Stainless Steel 410 T-Beam provides a cost – efficient alternative to nickel – based alloys and titanium.
Stainless Steel 410 Chain is alloyed with columbium – tantalum (referred to as niobium) and therefore allows good mechanical properties at high temperatures.Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle410 Stainless Steel Angle is known for their good thermal & electrical conductivities, high density, high melting point, and greater stiffness than steel.
These characteristics make 410 Stainless Steel Chain the ideal alloy for use in high temperatures, above 1100 Degree C , which is higher than steels and nickel – based super alloys.
Sachiya Steel International is one of the Leading Manufacture And Exporter of high quality Stainless Steel 317 Tube to Union, which is a typical austenitic 18 / 8 stainless steel SS, with the expansion of titanium.
Our Stainless Steel 317 Tube Fittings has a carbon content restricted to exclude the lower end of Stainless Steel 317 range, so is the grade of choice for high temperature applications.
These Stainless Steel 317 Compression Fittings have excellent toughness, even down to cryogenic temperatures, although other grades are normally used in sub – zero environments.
Our Stainless Steel 317 Union Tube Fittings comprises of 11 % to 15 % nickel and 18 % to 20 % chromium.These Stainless Steel 317 Ferrule Fittings is molybdenum comportment austenitic stainless steel which is similar to grade 316, be that as it may, by method for higher molybdenum substance.
Our Stainless Steel 317 Double Ferrule Fittings provides higher creep, tensile strength, and stress – to – rupture, at high temperatures than regular stainless steels.
These 317 Stainless Steel Union Fittings is a low carbon grade that offers imperviousness to sharpening, all through welding and other techniques.Stainless Steel 317 Tube to Union | Stainless Steel 317 Tube to Union | Stainless Steel 317 Tube to Union | Stainless Steel 317 Tube to Union | Stainless Steel 317 Tube to Union | Stainless Steel 317 Tube to UnionOur 317 Stainless Steel Tube Fittings i has excellent forming and welding qualities, and the addition of columbium and tantalum helps for exceptional inter – granular corrosion resistance.
