Sachiya Steel International is one of the well-known Manufacture and Exporter of high quality Stainless Steel 310H Angle, which is ferritic, straight chromium, non – harden able grade, combining good corrosion resistance and formability characteristics with useful mechanical properties. The ability of Stainless Steel 310H Angle to resist nitric acid attack permits its use in specific chemical applications but automotive trim, indoor panelling such as refrigeration cabinets and appliance components are its largest fields of application.
Stainless Steel 310H C-Channel has a quite bright, reflective appearance. Stainless Steel 310H H-Beam is the free – machining version of this grade, produced in bar form for high speed machining in automatic screw machines. Stainless Steel 310H I-Beam has good resistance to a wide variety of corrosive media including nitric acid and some organic acids. It attains its maximum corrosion resistance when in the highly polished or buffed condition. The resistance to pitting and crevice corrosion resistance in Stainless Steel 310H T-Beam is a little lower than that of Grade 304.
Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H Angle
The lower work hardening rate makes bending and forming somewhat easier for Stainless Steel 310H Chain, but the lower ductility restricts very severe operations. SS 310H Angle is not usually recommended for to be subjected to exterior exposure, but it performs well in mild indoor environments. Stress corrosion cracking resistance of SS 310H C-Channel is very high, as it is for all ferritic grades. Severe cold heading of SS 310H H-Beam wires is possible.
SS 310H Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705M |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| SS 310H Angle |
: | 5mm to 9mm |
| SS 310H Channel |
: | 40mm*20mm~300mm*300mm |
| SS 310H Beam | : | 3″ thru 12.31″ |
| SS 310H Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
310H Stainless Steel Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 310H | 0.04 – 0.10 | 2 max | 1.0 max | 0.045 max | 0.030 max | 24 – 26 | – | 19 – 21 | 53.885 min |
Stainless Steel 310H Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
Equivalent Grades for 310H Stainless Steel Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 310H | S31009 |
SS 310H Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the well-known Manufacture and Exporter of high quality Stainless Steel 310H Angle, which is ferritic, straight chromium, non – harden able grade, combining good corrosion resistance and formability characteristics with useful mechanical properties.
The ability of Stainless Steel 310H Angle to resist nitric acid attack permits its use in specific chemical applications but automotive trim, indoor panelling such as refrigeration cabinets and appliance components are its largest fields of application.
Stainless Steel 310H C-Channel has a quite bright, reflective appearance.Stainless Steel 310H H-Beam is the free – machining version of this grade, produced in bar form for high speed machining in automatic screw machines.
Stainless Steel 310H I-Beam has good resistance to a wide variety of corrosive media including nitric acid and some organic acids.
It attains its maximum corrosion resistance when in the highly polished or buffed condition.
The resistance to pitting and crevice corrosion resistance in Stainless Steel 310H T-Beam is a little lower than that of Grade 304.Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H AngleThe lower work hardening rate makes bending and forming somewhat easier for Stainless Steel 310H Chain, but the lower ductility restricts very severe operations.
Sachiya Steel International is one of the prominent Manufacture of high quality Stainless Steel 310H Wire Mesh, which Good resistance to mildly corrosive atmospheres, but significantly less than Grade 310H due to the Sulphur addition; the sulphide inclusions act as pit initiation sites.
Grade 310 should not be exposed to marine or other similar environments, as these will result in rapid pitting corrosion.
Because the sulphide inclusions in 310 are primarily aligned along the rolling direction the corrosion resistance is particularly reduced in cross-sections.It is like other common austenitic stainless steels, is subject to stress corrosion cracking in chloride containing environments above about 50°C.
Good oxidation resistance in intermittent service to 760°C and in continuous service to 870°C.
Welds must be annealed for maximum corrosion resistance, but even then poor mechanical and corrosion properties will result.For ultra-high machining rates there are also available special grade variants such as Ugima 303UX.
This includes copper to reduce the work hardening rate, in addition to the usual high Sulphur and Improved Machinability steel making practices.
Sachiya Steel International is one of the well-established Manufacture & Exporter of high quality Stainless Steel 310H Threaded Forged Fittings, which is silver – coloured metal that conducts heat and electricity well.
Stainless Steel 310H Forged Threaded Elbow is too reactive to exist alone so it only occurs naturally in the earth’s crust as iron ores, such as hematite, magnetite, and siderite.
Identifying characteristics of Stainless Steel 310H Forged Threaded Tee is that it is strongly magnetic.Stainless Steel 310H Forged Threaded Cross is exposed to a strong magnetic field, where any piece of steel can be magnetized.
Stainless Steel 310H Forged Threaded Cap is most troublesome characteristic is its tendency to form rust.
Rust (or ferric oxide) is a brown, crumbly compound that is produced when Stainless Steel 310H Forged Threaded is exposed to oxygen.
The rate of rust – how quickly Stainless Steel 310H Forged Threaded Coupling turns into ferric oxide – is determined by the oxygen content of the water and the surface area of the steel.Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged Fittings | Stainless Steel 310H Threaded Forged FittingsRust can be prevented by coating Stainless Steel 310H Forged Threaded Union with other metals that are chemically more attractive to oxygen, such as zinc (the process of coating iron with zinc is referred to as ‘galvanizing’).
Sachiya Steel International is one of the well-known Manufacture and Exporter of high quality Stainless Steel 310H Tube to Female Pipes, which have very substantial contents of the high cost ingredients nickel and molybdenum.
Many of the applications in which this grade has previously performed well can now be fulfilled at lower cost, so Stainless Steel 310H Tube Fittings is used less commonly than in the past.
Although Stainless Steel 310H Compression Fittings is originally developed for its resistance to sulphuric acid it also has a very high resistance to a wide range of environments.Stainless Steel 310H Female Fittings indicates that the material has good resistance to warm sea water and other high chloride environments.
In SS 310H Tube Fittings, high nickel content results in a much better resistance to stress corrosion cracking than the standard austenitic grades.
Copper in 310H Stainless Steel Compression Tube Fittings adds resistance to sulphuric and other reducing acids, particularly in the very aggressive “mid concentration” range.In most environments, SS 310H Ferrule Tube Fittings has a corrosion performance intermediate between the standard austenitic grade and the very highly alloyed molybdenum along with similar “super austenitic” grades.
In aggressive nitric acid, SS 310H Double Ferrule Tube Fittings has less resistance than molybdenum – free grades such as 304L and 310L.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of high quality Stainless Steel 310H Round Bar, which is utilized for ease of fabrication.
Stainless Steel 310H Square Bars (UNS S31009) is a high carbon modification developed for enhanced creep resistance.
In most instances the grain size and carbon content of the plate can meet requirements of Stainless Steel 310H Flat Bars.
We are a leader in Indian markets for many years in the field of manufacturing of Stainless Steel 310H Threaded Bars that are required by the oilfield, petrochemical as well as other process industries.
Stainless Steel 310H Hollow Bars can be easily welded and processed by standard shop fabrication practices.Stainless Steel 310H Hexagonal Bars represents the optimum in machinability among the austenitic alloys.
Stainless Steel 310H Triangular Bars is primarily used when production involves extensive machining in automatic screw machines.
