Sachiya Steel International is one of the well-established Manufacture and Exporter for Stainless Steel 904L Wire Mesh, which is a harden able high – carbon chromium steel. When put under heat treatment, Stainless Steel 904L Hexagonal Wire Mesh attains the highest hardness levels of any grade of stainless steel. Resistance to sulphuric acid is particularly exceptional, but Stainless Steel 904L Welding Wire Mesh shows useful resistance in phosphoric acid, nitric acid as well as in chloride environments. SS 904L Netting Wire Mesh has good mechanical properties at both ambient and elevated temperatures, up to approximately 930 Degree F (500 Degree C) and is readily fabricated by usual industrial processes.
Stainless Steel 904L Woven Wire Mesh is composed of carbon, chromium, copper, iron, manganese, molybdenum, nickel, phosphorous, silicon, and Sulphur. Application of SS 904L Spring Steel Wire Mesh could result in real cost savings when carefully compared to higher – cost alloys to determine if the necessary resistance is obtained in the chosen media. Post weld heat treatment of SS 904L Fencing Wire Mesh may not be required for use in some corrosive environments due to resistance to inter – granular corrosion in the as-welded condition. We use a range of transport partners to ship overnight these 904L Stainless Steel Wire Mesh within foreign countries, and offer a full range of logistics solutions from priority express services to more cost – effective economy shipments all around the globe.
SS 904L Wiremesh Specifications |
||
| Specifications | : | ASTM A 164 ASME SA 164 |
| Standard | : | ASTM, ASME International Standards |
| Length | : | 30m to 100″ |
| Width | : | 1m to 48″ |
| Type | : | Wire Mesh , Hexagonal Wiremesh, Welding Wiremesh, Netting Wiremesh, Woven Wiremesh , Spring Steel wire mesh, Fencing Wiremesh etc. |
| Grade | C | Mn | Si | P | S | Cr | MO | Ni | Cu | |
| 904L | min. | – | – | – | – | – | 19.0 | 4.0-5.0 | 23.0 | 1.0 |
| max. | 0.20 | 2.0 | 1.0 | 0.045 | 0.035 | 23.0 | 28.0 | 2.0 | ||
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 446 | 490 | 220 | 35 | 70-90 typical | – |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | KS | AFNOR | EN |
| SS 904L | 1.4539 | N08904 | SUS 904L | 904S13 | STS 317J5L | Z2 NCDU 25-20 | X1NiCrMoCu25-20-5 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the well-established Manufacture and Exporter for Stainless Steel 904L Wire Mesh, which is a harden able high – carbon chromium steel.
When put under heat treatment, Stainless Steel 904L Hexagonal Wire Mesh attains the highest hardness levels of any grade of stainless steel.
Resistance to sulphuric acid is particularly exceptional, but Stainless Steel 904L Welding Wire Mesh shows useful resistance in phosphoric acid, nitric acid as well as in chloride environments.
SS 904L Netting Wire Mesh has good mechanical properties at both ambient and elevated temperatures, up to approximately 930 Degree F (500 Degree C) and is readily fabricated by usual industrial processes.Stainless Steel 904L Woven Wire Mesh is composed of carbon, chromium, copper, iron, manganese, molybdenum, nickel, phosphorous, silicon, and Sulphur.
Application of SS 904L Spring Steel Wire Mesh could result in real cost savings when carefully compared to higher – cost alloys to determine if the necessary resistance is obtained in the chosen media.
Post weld heat treatment of SS 904L Fencing Wire Mesh may not be required for use in some corrosive environments due to resistance to inter – granular corrosion in the as-welded condition.
