Sachiya Steel International is one of the pioneer Manufacture of Stainless Steel 446 Angle, which is one of the most carburization resistant materials available. Stainless Steel 446 Angle maintains nearly constant dimensions over the range of normal atmospheric temperatures, and has a low coefficient of expansion from cryogenic temperatures to about 500 Degree F. Stainless Steel 446 C-Channel also retains good strength and toughness at cryogenic temperatures. Stainless Steel 446 H-Beam can be hot and cold formed and machined using processes similar to austenitic stainless steels.
Stainless Steel 446 I-Beam is weldable using Filler Metal which is available in bare wire for both the GTAW and GMAW process. Stainless Steel 446 T-Beam has an exceptional ability to withstand the repeated thermal shock of oil or water quenching. Stainless Steel 446 Chain is one of the few materials that can withstand corrosive conditions ranging from aqueous to white heat. Upon shutdown, 446 Stainless Steel Angle resists dew point corrosion by sulphuric acid and polythionic acid stress corrosion cracking.
Stainless Steel 446 Angle | Stainless Steel 446 Angle | Stainless Steel 446 Angle | Stainless Steel 446 Angle | Stainless Steel 446 Angle | Stainless Steel 446 Angle | Stainless Steel 446 Angle | Stainless Steel 446 Angle | Stainless Steel 446 Angle | Stainless Steel 446 Angle | Stainless Steel 446 Angle
Do not preheat this 446 Stainless Steel Chain, keep inter – pass temperature below 212 Degree F and use reinforced stringer beads. Because of this ability, 446 Stainless Steel C-Channel has been the choice for all types of applications that require heavily carburizing atmospheres. Fabrications of 446 Stainless Steel H-Beam including radiant tubes, corrugated boxes and furnace belt pins has all been made from to withstand the high carbon potentials within these atmospheres.
SS 446 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705M |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| SS 446 Angle |
: | 5mm to 9mm |
| SS 446 Channel |
: | 40mm*20mm~300mm*300mm |
| SS 446 Beam | : | 3″ thru 12.31″ |
| SS 446 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
446 Stainless Steel Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Cb | Ni | N |
| SS 446 | 0.2 max | 1.5 max | 0.75 max | 0.040 max | 0.030 max | 23-30 | – | 0.50 | 0.10-0.25 |
Stainless Steel 446 Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| MPa – 485 | MPa – 275 |
Equivalent Grades for 446 Stainless Steel Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 446 | 1.4762/1.4763 | S44600 | SUS 446 | – | – | – | – |
SS 446 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the well-known Manufacture and Exporter of Stainless Steel 410 Angle, which is also characterized by high ductility and impact strength.
Stainless Steel 410 Angle is an austenitic stainless steel offering an excellent resistance to inter – granular corrosion following exposure to temperatures in the chromium carbide precipitation range from 800 Degree to 1500 Degree F. Stainless Steel 410 C-Channel is well suited for applications related to chemical processing, heat exchangers, desalinization and more.
With its high levels of chromium, molybdenum, and nitrogen, Stainless Steel 410 H-Beam has excellent resistance to a wide range of chemicals.Stainless Steel 410 I-Beam is especially suited for high chloride environments such as brackish water, seawater, pulp mill bleach plants and other high chloride process gicstreams.
Stainless Steel 410 T-Beam provides a cost – efficient alternative to nickel – based alloys and titanium.
Stainless Steel 410 Chain is alloyed with columbium – tantalum (referred to as niobium) and therefore allows good mechanical properties at high temperatures.Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle410 Stainless Steel Angle is known for their good thermal & electrical conductivities, high density, high melting point, and greater stiffness than steel.
These characteristics make 410 Stainless Steel Chain the ideal alloy for use in high temperatures, above 1100 Degree C , which is higher than steels and nickel – based super alloys.
Sachiya Steel International is one of the pioneer Manufacture and Exporter of Stainless Steel 446 Threaded Forged Fittings, which is commonly used for various fasteners and pins that require strength and resistance to galling.
Because of its high – hardness capability, Stainless Steel 446 Forged Threaded Elbow is seldom welded, because the additions of 4 % silicon and 8 % manganese inhibit wear, galling, and fretting.
However, if welding is necessary, the parts of Stainless Steel 446 Forged Threaded Tee should be preheated and maintained at about 500 Degree F, welded, and then immediately given a 6 hour – 8 hour anneal at 1350 Degree F / 1400 Degree F with a slow furnace cool.The parts of Stainless Steel 446 Forged Threaded Cross should not be allowed to cool below 500 Degree F between welding and annealing, where high welding heat inputs should be used.
To obtain mechanical properties of Stainless Steel 446 Forged Threaded Cap in the weld similar to those in the base metal, welding consumables of like composition should be considered.
In cutlery applications, grinding and polishing are very important, where Stainless Steel 446 Forged Threaded Fittings works well in these operations.Stainless Steel 446 Threaded Forged Fittings | Stainless Steel 446 Threaded Forged Fittings | Stainless Steel 446 Threaded Forged Fittings | Stainless Steel 446 Threaded Forged Fittings | Stainless Steel 446 Threaded Forged Fittings | Stainless Steel 446 Threaded Forged Fittings | Stainless Steel 446 Threaded Forged Fittings | Stainless Steel 446 Threaded Forged Fittings | Stainless Steel 446 Threaded Forged FittingsDo not overheat while grinding Stainless Steel 446 Forged Threaded Coupling, since both the hardness and corrosion resistance may be lowered.
Typical applications of Stainless Steel 446 Forged Threaded Union are large airframe structural components and injection moulding equipment.
Sachiya Steel International is one of the well-known Manufacture and Exporter of Stainless Steel 446 Tube to Female Pipes, which is the strongest of the alloys, useful for continuous service to 1800 Degree F. Deposits of these Stainless Steel 446 Tube Fittings have outstanding resistance to wear, erosion, creep, thermal fatigue and oxidation.
Because of its long and widespread use, Stainless Steel 446 Compression Fittings has been the subject of many investigations to determine its properties over a wide range of conditions, thus making it an unusually well characterized material.
When exposed for prolonged periods at intermediate temperatures, these Stainless Steel 446 Female Connector Fittings exhibits a loss of room temperature ductility in much the same fashion as other super – alloys.Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female PipesStainless Steel 446 Ferrule Tube Fittings is welded using gas tungsten arc, gas metal arc, shielded metal arc, electron beam and resistance welding, where submerged arc welding is not recommended.
These Stainless Steel 446 Double Ferrule Tube Fittings is used good for joint fit-up, minimum restraint, low inter – pass temperature and cool rapidly from welding.
For maximum ductility, fabricated components of 446 Stainless Steel Female Connector Fittings should be annealed 2150 Degree F – 2250 Degree F, and then rapid cool.
The principal application of these 446 Stainless Steel Ferrule Tube Fittings is for hard – facing turbine blade interlock surfaces, which are further available in straight cut lengths or layer wound spools.Stainless Steel 446 Tube to Female Pipes SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for Brass 446 Stainless Steel Tube to Female Pipes Fitting Chemical Composition GradeCMnSiPSCrMoNiN446min.–––––23.0––0.10max.0.21.50.750.0400.03030.0–0.500.25 Stainless Steel 446 Tube to Female Pipes Fitting Mechanical Properties GradeTensile Strength (MPa) minYield Strength 0.2% Proof (MPa) minElongation (% in 50mm) minHardnessRockwell B (HR B) maxBrinell (HB) max4464852752092201 Stainless Steel 446 Tube to Female Pipes Fitting Physical Properties GradeDensity (kg/m3)Elastic Modulus (GPa)Mean Coefficient of Thermal Expansion (m/m/0C)Thermal Conductivity (W/m.K)Specific Heat 0-1000C (J/kg.K)Electrical Resistivity (n.m)0-1000C0-3150C0-5380Cat 1000Cat 5000C44677502009.911.411.624.928.7460570 Equivalent Grades for 446 Stainless Steel Tube to Female Pipes Fitting GradeUNS NoOld BritishEuronormSwedish SSJapanese JISBSEnNoName446S44600––1.4762 / 1.4763––– SS 446 Tube to Female Pipes Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 446 Pipe Fittings, which is subject to stress corrosion cracking in hot, a concentrated caustic alkali.
When stainless steel compounds are present as well, or for ammonium hydroxide service, these Stainless Steel 446 Compression Pipe Fittings is suggested.
To avoid stress corrosion cracking, our Stainless Steel 446 Ferrule Pipe Fittings fabrication should be fully stress relieved prior to use.A minimum treatment of 1650 Degree F for 1 hour is suggested in our SS 446 Double Ferrule Pipe Fittings, but 1800 Degree F – 1850 Degree F for 1 hour preferred.
This Stainless Steel 446 Accessories is a high strength nickel base super – alloy used for cryogenic temperatures up to long term service at 1200 Degree F. Our 446 Stainless Steel Compression Pipe Fittings is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition.Stainless Steel 446 Pipe Fittings | Stainless Steel 446 Pipe Fittings | Stainless Steel 446 Pipe Fittings | Stainless Steel 446 Pipe Fittings | Stainless Steel 446 Pipe Fittings | Stainless Steel 446 Pipe FittingsThese 446 Stainless Steel Ferrule Pipe Fittings will show a contraction after precipitation hardening, where annealing is done at 1700 Degree F – 1850 Degree F, and then air cool or faster.
Our 446 Stainless Steel Double Ferrule Pipe Fittings is a low carbon, high purity, nitrogen-bearing “super-austenitic” stainless alloy.
These 446 SS Accessories was designed to be a seawater resistant material and has since been demonstrated to be resistant to a broad range of very corrosive environments.Stainless Steel 446 Pipe Fittings / Accessories SpecificationsSpecifications:ASTM A182 ASME SA 182Tube Size:1/16”OD to 2”OD, 2mm OD to 50mm ODThread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for BrassSS 446 Pipe Fittings Chemical CompositionGradeCMnSiPSCrMONiN446min.–––––23.0––0.10max.0.201.50.750.0400.03030.00.500.25Stainless Steel 446 Accessories Mechanical PropertiesGradeTensile Strength (MPa) minYield Strength 0.2% Proof (MPa) minElongation (% in 50mm) minHardnessRockwell B (HR B) maxBrinell (HB) max4464852752092201Equivalent Grades for 446 Stainless Steel Pipe FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 4461.4762S44600SUS 446––––SS 446 Pipe Fittings / Accessories Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the leading manufacturer and exporter of Stainless Steel 446 Tube to Male Fittings, which is available in different specifications as per clients’ requirements.
The microstructure of Stainless Steel 446 Tube Fittings consists of about 50 % of the hard intermetallic Laves phase dispersed in a softer cobalt alloy matrix.
Stainless Steel 446 Compression Fittings provides the material with exceptional metal to metal wear bearing properties, where follow annealing by stabilization and aging treatments.
The high levels of molybdenum and chromium present in Stainless Steel 446 Male Connector Fittings favors the formation of the high hardness phase and also provide a high level of corrosion resistance.The phase of Stainless Steel 446 Ferrule Fittings itself has a 2840 Degree F melting point, which helps to retain its wear resistance to high temperatures.
Mechanical properties of Stainless Steel 446 Double Ferrule Fittings vary with the solution and aging treatments, where shapes are available per customer requirements.
Higher solution temperatures of 446 Stainless Steel Male Connector Fittings result in better room temperature ductility and elevated temperature creep – rupture strength.Lower solution temperatures in 446 Stainless Steel Tube Fittings give higher tensile strengths, where short time hot tensile strength is inferior at temperatures up to 1350 Degree F. The creep – rupture strength of 446 Stainless Steel Compression Fittings is superior to that of alloy 718 at temperatures above 1150 Degree F – 1200 Degree F.Stainless Steel 446 Tube to Male Fittings SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for Brass SS 446 Tube To Male Fittings Chemical Composition GradeCMnSiPSCrMoNiNFeSS 4460.2 max1.5 max0.75 max0.04 max0.030 max23 – 30–0.50 max0.10 – 0.25Balance Stainless Steel 446 Tube To Male Fittings Mechanical Properties DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation7.5 g/cm31510 °C (2750 °F)Psi – 75,000 , MPa – 485Psi – 40,000 , MPa – 27520 % Equivalent Grades for 446 Stainless Steel Ferrule Fitting Tube To Male Fittings STANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 4461.4762S44600––––– SS 446 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry About Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
