Sachiya Steel International offers a wide range of Inconel Alloy 600 Tube to Female Pipes, which can be formed both ways i.e. cold – formed and hot – formed by different processes. Inconel 600 Tube Fittings is a superior choice for chemical processing equipment, heat treating muffles and retorts. Inconel 600 Compression Fittings is used in chemical processing, food processing, phenol condensers, heat treating, soap manufacture, vegetable vessel, fatty acid vessels, and so on.
Above this temperature in Inconel 600 Female Connector Fittings, grain growth may be objectionable, although very brief heating at 1900 Degree F will cause complete softening without undue grain growth. Typical of other nickel alloys, heavy – duty equipment in Inconel 600 Ferrule Fittings should be used along with sharp tooling and more than adequate cooling. Inconel 600 Double Ferrule Fittings is also used in evaporator tubes, flaking trays and tube sheets for the manufacture of sodium sulfide.
Inconel Alloy 600 Tube to Female Pipes | Inconel Alloy 600 Tube to Female Pipes | Inconel Alloy 600 Tube to Female Pipes | Inconel Alloy 600 Tube to Female Pipes | Inconel Alloy 600 Tube to Female Pipes | Inconel Alloy 600 Tube to Female Pipes | Inconel Alloy 600 Tube to Female Pipes
Typical applications of Inconel 600 Compression Tube Fittings include the chemical, aerospace, pulp and paper, heat treating and nuclear engineering industries. Alloy 600 Tube Fittings is as well used in springs, lock wire, seals, reactor vessels, fixtures machinery, process equipment, furnace seals fans. Alloy 600 Compression Fittings is a Nickel – Chromium – Iron alloy with good corrosion resistance, high strength at high temperatures and good oxidation resistance. Alloy 600 Female Connector Fittings basically offers good oxidation and corrosion resistance at a very high temperature range.
|
Inconel 600 Tube to Female Pipes Specifications
|
||
| Specifications | : | ASTM B366 ASME SB 366 |
| Size | : | OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Pressure Rating |
: | 3000 – 6000 PSI |
| Applicable Temperature |
: | 150-400 C |
| Type |
: | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting. |
| Grade | C | Mn | Si | Fe | S | Cr | Cu | Ni | |
| 600 | min. | – | – | – | 6.0 | – | 14.0 | – | 72.0 |
| max. | 0.15 | 1.0 | 0.5 | 10.0 | 0.015 | 17.0 | 0.5 | – | |
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 600 | Psi – 95,000 , MPa -655 | Psi – 45,000 , MPa – 310 | 40 | – | – |
| Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
| BS | En | No | AFNOR | ||||
| Inconel 600 | N06600 | NA 13 | NiCr15Fe | 2.4816 | NC15FE11M | МНЖМц 28-2,5-1,5 | NCF 600 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel Alloy 600 Tube to Male Fittings in various sizes and dimensions, which has Carburization resistance and Oxidation resistance to 2000 Degree F. Heavy duty machining equipment and tooling in Inconel 600 Tube Fittings should be used to minimize chatter or work – hardening of the alloy ahead of the cutting.
Besides heat – treating industries, Inconel 600 Compression Fittings is as well used in furnace component, aerospace, pulp and paper, chemical industries and nuclear engineering.
Inconel 600 Compression Tube Fittings is a superior choice for: heat exchanger tubing and nuclear reactor vessels.Typical corrosion applications of Inconel 600 Male Connector Fittings include titanium dioxide production (chloride route), vinyl chloride monomer (VCM), magnesium chloride, and perchloroethylene syntheses.
Softening by annealing begins at about 1600 Degree F (871 Degree C), these Inconel 600 Ferrule Fittings is reasonably complete after 10 to 15 minutes of heating at 1800 Degree F (982 Degree C).Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male FittingsInconel 600 Double Ferrule Fittings is slightly more machinable compared to 304 stainless steel and should be performed by means of tools large enough to handle the loads.
Applications of Alloy 600 Tube Fittings include heaters, bubble towers, stills and condensers for processing of fatty acids.
Alloy 600 Male Connector Fittings is combination of Nickel Chromium and Iron provides a standard material for the chemical industry and the automotive engine, aero – engine and airframe sectors.Inconel 600 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Inconel, 300/1000/3000PSI for BrassInconel Alloy 600 Tube To Male Fittings Chemical CompositionGradeCMnSiSCuFeNiCrInconel 6000.15 max1.00 max0.50 max0.015max0.50 max6.00 – 10.0072.00 min14.00 – 17.00Inconel 600 Tube To Male Fittings Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationInconel 6008.47 g/cm31413 °C (2580 °F)Psi – 95,000 , MPa – 655Psi – 45,000 , MPa – 31040 %Equivalent Grades for 600 Inconel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENInconel 6002.4816N06600NCF 600NA 13МНЖМц 28-2,5-1,5NC15FE11MNiCr15Fe Alloy 600 Tube To Male Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 600 Tube to Union Fittings in various sizes and dimensions, which are perhaps most resistant of all commonly used engineering alloys.
Inconel 600 Tube Fittings (UNS N06600) presents the desirable combination of high strength and good weldability under a wide range of temperatures.
Inconel 600 Compression Fittings has Good Corrosion Resistance at High Temperatures and shows high levels of resistance to stress – corrosion cracking.
The high nickel content of Inconel 600 Double Ferrule Fittings provides exceptional resistance to chloride stress corrosion cracking.Inconel 600 Ferrule Fittings has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures.
Inconel 600 Compression Tube Fittings has excellent corrosion by high – purity water, along with caustic corrosion.
Alloy 600 Tube Fittings does work – harden during machining and has higher strength and “gumminess” not typical of steels.
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 600 Tube to Male Fittings in various sizes and dimensions, which has Carburization resistance and Oxidation resistance to 2000 Degree F. Heavy duty machining equipment and tooling in Inconel 600 Tube Fittings should be used to minimize chatter or work – hardening of the alloy ahead of the cutting.
Besides heat – treating industries, Inconel 600 Compression Fittings is as well used in furnace component, aerospace, pulp and paper, chemical industries and nuclear engineering.
Inconel 600 Compression Tube Fittings is a superior choice for: heat exchanger tubing and nuclear reactor vessels.Typical corrosion applications of Inconel 600 Male Connector Fittings include titanium dioxide production (chloride route), vinyl chloride monomer (VCM), magnesium chloride, and perchloroethylene syntheses.
Softening by annealing begins at about 1600 Degree F (871 Degree C), these Inconel 600 Ferrule Fittings is reasonably complete after 10 to 15 minutes of heating at 1800 Degree F (982 Degree C).Inconel 600 Double Ferrule Fittings is slightly more machinable compared to 304 stainless steel and should be performed by means of tools large enough to handle the loads.
Applications of Alloy 600 Tube Fittings include heaters, bubble towers, stills and condensers for processing of fatty acids.
Alloy 600 Male Connector Fittings is combination of Nickel Chromium and Iron provides a standard material for the chemical industry and the automotive engine, aero – engine and airframe sectors.Inconel 600 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Inconel, 300/1000/3000PSI for BrassInconel Alloy 600 Tube To Male Fittings Chemical CompositionGradeCMnSiSCuFeNiCrInconel 6000.15 max1.00 max0.50 max0.015max0.50 max6.00 – 10.0072.00 min14.00 – 17.00Inconel 600 Tube To Male Fittings Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationInconel 6008.47 g/cm31413 °C (2580 °F)Psi – 95,000 , MPa – 655Psi – 45,000 , MPa – 31040 %Equivalent Grades for 600 Inconel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENInconel 6002.4816N06600NCF 600NA 13МНЖМц 28-2,5-1,5NC15FE11MNiCr15Fe Alloy 600 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International deals in an all-embracing range of Inconel Alloy 718 Tube to Female Pipes, which is age – harden able with a unique property of slow aging response that permits heating and cooling during annealing without the danger of cracking.
Inconel 718 Tube Fittings can be readily machined but due to its high strength and work hardening characteristics, tooling, operating speeds and coolants should be considered.After fabrication, Inconel 718 Compression Fittings can be heat treated as required and as per the applicable specification.
Inconel 718 Female Connector Fittings is usually provided in the solution annealed condition, but can be also being supplied in the aged hardened or precipitation heat treated condition prior to forming.
Inconel 718 Ferrule Fittings has been used world – wide in aerospace, aircraft, oil, and chemical industries, and also nuclear power plants because of its high strength, excellent ductility, good formability and weldability, etc.Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female PipesThese Inconel 718 Double Ferrule Fittings is actually an age – harden able Nickel – Chromium – Columbium (Niobium) – Molybdenum alloy with high strength, corrosion – resistance, and good fabrication characteristics.
Inconel 718 Compression Tube Fittings is a high strength nickel – chromium material and a nickel super alloy frequently used for cryogenic storage tanks, turbines, down hole shafting and well head parts.
We have met every challenge of providing quality, timely, cost – effective solutions for these Alloy 718 Tube Fittings and specialty fastener applications.Inconel 718 Tube to Female Pipes SpecificationsSpecifications:ASTM B366 ASME SB 366Size:OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Pressure Rating:3000 – 7180 PSIApplicable Temperature:150-400 CType:Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
