Sachiya Steel International is one of the prominent Manufacture and Exporter of Monel Alloy K500 Tube to Female Pipes, where we are catering our services to many Industries. Monel K500 Tube Fittings has excellent general corrosion resistance to sulphuric acid and to chloride stress corrosion cracking. Resistance to sulphuric acid is particularly exceptional but Monel K500 Compression Fittings shows useful resistance in phosphoric acid, nitric acid as well as in chloride environments.
Monel K500 Female Connector Fittings has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulphuric, phosphoric, and nitric acids. Monel K500 Ferrule Tube Fittings also contains niobium for stabilization against sensitization and resultants inter – granular corrosion. At 33 % nickel, Monel K500 Double Ferrule Tube Fittings has practical immunity to chloride stress corrosion cracking. Monel K500 Compression Tube Fittings is often chosen to solve SCC problems, which may occur with 316L stainless.
Alloy K500 Female Connector Fittings can be used for a wide variety of applications including: control valves, pressure relief valves, and centrifugal pumps. Alloy K500 Ferrule Tube Fittings was designed for maximum resistance to acid attack and demonstrates superior resistance to stress – corrosion cracking in boiling sulphuric acid. These Alloy K500 Double Ferrule Tube Fittings has good mechanical properties at both ambient and elevated temperatures, up to approximately 930 Degree F (500 Degree C) and is readily fabricated by usual industrial processes.
Monel K500 Tube to Female Pipes Specifications
|
||
Specifications | : | ASTM B366 ASME SB 366 |
Size | : | OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″ |
Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
Pressure Rating |
: | 3000 – 4000 PSI |
Applicable Temperature |
: | 150-400 C |
Type |
: | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting. |
Monel K500 | Ni | C | Al | Mn | Si | Fe | Cu | S | Ti | Cr |
63.0 min | 0.25 max | 2.3 – 3.15 | 1.5 max | 0.5 max | 05 – 2 | 27.0 – 33.0 | 0.010 max | 0.35 – 0.85 | – |
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 1,15,000 , MPa – 790 | Psi – 1,60,000 , MPa – 1100 | 20 % |
STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
Monel K500 | N05500 | 2.4375 | – | – | – | – | – |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry