Sachiya Steel International is one of the pioneer Manufacture and Exporter of Hastelloy X Angle And Other Hastelloy Products, where its behavior occurs as a consequence of the precipitation of deleterious phases. When exposed for prolonged periods at intermediate temperatures, Hastelloy X Angle exhibits a loss of room temperature ductility in much the same fashion as some other solid – solution –strengthened super alloys. Wear results shown in Hastelloy X Chain is generated for standard matching material room – temperature pin on disc tests, where wear depths are given as a function of applied load.
The results indicate that Hastelloy X C-Channel is superior in galling resistance to many materials and is surpassed, which were specifically designed to have excellent wear resistance. Hastelloy X I-Beam are work harden rapidly during machining and require more power to cut than do the plain carbon steels. Hastelloy X T-Beam is ‘gummy,’ with chips that tend to be stringy and tough, where machine tools should be rigid and used to no more than 75 % of their rated capacity.
Both work piece and tool in Hastelloy X H-Beam should be held rigidly, and so tool overhang should be minimized. Rigidity of Alloy X Chain is particularly important when machining titanium, as titanium has a much lower modulus of elasticity than either steel or nickel alloys. Slender work pieces of titanium in Alloy X Angle tend to deflect under tool pressures causing chatter, tool rubbing and tolerance problems.
Hastelloy X Angle, Channel, Beam, Chain Specifications |
||
Specifications | : | ASTM B572 / ASME B572 |
Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Hastelloy X Angle |
: | 5mm to 9mm |
Hastelloy X Channel |
: | 40mm*20mm~300mm*300mm |
Hastelloy X Beam | : | 3″ thru 12.31″ |
Hastelloy X Chain |
: | 1/8 inch – 1/2 inch Diameter |
Thickness |
: | 3.0mm – 120mm |
Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
X Hastelloy Angle, Channel, Beam, Chain Chemical Composition
Grade | C | Mn | Si | Co | P | Fe | Mo | Ni | Cr | S |
Hastelloy X | 0.05 – 0.15 | 1 max | 1 max | 0.50 – 2.50 | 0.04 max | 17.0-20.0 | 8.0-10.0 | bal | 20.50-23.00 | 0.03 max |
Hastelloy X Angle, Channel, Beam, Chain Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.22 g/cm3 | 1355 °C | MPa – 665 | MPa –240 | 35% |
Equivalent Grades for X Hastelloy Angle, Channel, Beam, Chain
STANDARD | WERKSTOFF NR. | UNS | JIS | EN |
Hastelloy X | 2.4665 | N06002 |
Hastelloy X Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry