Sachiya Steel International is one of the Leading Manufacturer And Exporter of high quality Stainless Steel 310H Tube to Male Fittings, which is considered resistant at ambient temperatures and reducing to about at 60 Degree C. Our Stainless Steel 310H Tube Fittings is equivalent to Grade 310 in the annealed condition and superior if the application involves service in the 425 Degree C – 900 Degree C range. These Stainless Steel 310H Compression Fittings is subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 50 Degree C.
This treatment in our Stainless Steel 310H Male Connector Fittings follows normal solution treatment, where heat up to approx. 870 Degree C – 890 Degree C for thickness and air cool. Stabilization of these Stainless Steel 310H Ferrule Tube Fittings is recommended for most severe service conditions (above 425 Degree C) and particularly for material annealed at the upper side of the annealing temperature range. Our Stainless Steel 310H Ferrule Double Ferrule Tube Fittings combines excellent service properties at high temperatures by means of ease of fabrication.
These Alloy 310H Tube Fittings resists oxidation at temperatures up to 1150 Degree C and can provide superior service to Grade 304 in carbon, nitrogen and Sulphur containing atmospheres. Although not designed for aqueous corrosion resistance, the high chromium and nitrogen content gives our SS 310H Male Connector Fittings a pitting resistance approximating that of 316.
Stainless Steel 310H Tube to Male Fittings Specifications
|
||
Specifications | : | ASTM A276 ASME SA 479 |
Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
Brass | : | ASTM B16 ASTM B 453 |
Pressure Rating | : | 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
SS 310H | 0.04 – 0.10 | 2 max | 1.00 max | 0.045 max | 0.030 max | 24.00 – 26.00 | – | 19.00 – 21.00 | 53.885 min |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40% |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 310H | – | S31009 | – | – | – | – | – |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Contact:
D-2, Office no. 3,
Gr. Floor, Bharat Nagar Society,
Grant Road (E), Mumbai - 400007
Email: [email protected]
For More Information Visit Our Website : Sachiya Steel International