Sachiya Steel International is one of the Leading Manufacturer And Exporter of Nickel 200 Tube to Male Fittings, which has some outstanding quality of attributes such as durable, fine finish, dimensionally constant, and so on. These Nickel 200 Tube Fittings (UNS N02200) has a low annealed rigidity and very low work – toughening rate that is needed for cold establishing processes such as spinning, coining, deep drawing, and so on. For the reason that the alloy shows excellent corrosion resistance, our Nickel 200 Compression Fittings has been used in caustic solution, food handling machinery, all – purpose corrosion – resistant components and constructions.
These Nickel 200 Male Connector Fittings provide corrosion resistance in neutral and reducing media along with in oxidizing environments offered that the oxidizing media permits the establishment of an unreceptive oxide film. Meanwhile, our Nickel 200 Compression Tube Fittings are as well being offered in different sizes and shapes to our customers. These Nickel 200 Ferrule Fittings has a relatively low work – hardening rate, but it can be cold worked to moderately high strength levels while maintaining ductility.
Sachiya Steel International is one of the pioneer stockiest and trader of our quality Nickel 200 Double Ferrule Fittings, which are often required in complex applications, where corrosion and thermal resistance are demanded. These Alloy 200 Male Connector Fittings are nickel and chromium alloys, as well as nickel and molybdenum alloys with high – temperature resistant properties.
|
Nickel 200 Tube to Male Fittings Specifications
|
||
| Specifications | : | ASTM B366 ASME SB366 |
| Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
| Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Brass | : | ASTM B16 ASTM B 453 |
| Pressure Rating | : | 6000PSI for Nickel, 300/1000/3000PSI for Brass |
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 200 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website : Sachiya Steel International
Sachiya Steel International is one of the leading Manufacturer and Exporter an extensive collection of Nickel Alloy 200 Tube to Male Fittings, which has some outstanding quality of attributes such as durable, fine finish, dimensionally constant, and so on.
These Nickel 200 Tube Fittings (UNS N02200) has a low annealed rigidity and very low work – toughening rate that is needed for cold establishing processes such as spinning, coining, deep drawing, and so on.
For the reason that the alloy shows excellent corrosion resistance, our Nickel 200 Compression Fittings has been used in caustic solution, food handling machinery, all – purpose corrosion – resistant components and constructions.These Nickel 200 Male Connector Fittings provide corrosion resistance in neutral and reducing media along with in oxidizing environments offered that the oxidizing media permits the establishment of an unreceptive oxide film.
Meanwhile, our Nickel 200 Compression Tube Fittings are as well being offered in different sizes and shapes to our customers.
These Nickel 200 Ferrule Fittings has a relatively low work – hardening rate, but it can be cold worked to moderately high strength levels while maintaining ductility.Nickel Alloy 200 Tube to Male Fittings | Nickel Alloy 200 Tube to Male Fittings | Nickel Alloy 200 Tube to Male Fittings | Nickel Alloy 200 Tube to Male Fittings | Nickel Alloy 200 Tube to Male Fittings | Nickel Alloy 200 Tube to Male Fittings | Nickel Alloy 200 Tube to Male Fittings | Nickel Alloy 200 Tube to Male Fittings | Nickel Alloy 200 Tube to Male FittingsSachiya Steel International is one of the pioneer stockiest and trader of our quality Nickel 200 Double Ferrule Fittings, which are often required in complex applications, where corrosion and thermal resistance are demanded.
These Alloy 200 Male Connector Fittings are nickel and chromium alloys, as well as nickel and molybdenum alloys with high – temperature resistant properties.Nickel 200 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Nickel, 300/1000/3000PSI for BrassNickel Alloy 200 Tube To Male Fittings Chemical CompositionGradeCMnSiSCuFeNiNickel 2000.15 max0.35 max0.35 max0.01 max0.25 max0.40 max99.0 minNickel 200 Tube To Male Fittings Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationNickel 2008.9 g/cm31446 °C (2635 °F)Psi – 67000 , MPa – 462Psi – 21500 , MPa – 14845 %Equivalent Grades for 200 Nickel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENNickel 2002.4066N02200NW 2200NA 11НП-2N-100MNi 99.2 Alloy 200 Tube To Male Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of quality Nickel 201 Tube to Male Fittings, which is the higher carbon version of the alloy.
Nickel 201 Tube Fittings has slightly improved corrosion resistance over stainless steel in strongly oxidizing environments.
Nickel 201 Compression Fittings is also advantageous for high temperature service because of its good mechanical properties.
Nickel 201 Male Connector Fittings offers higher creep and stress rupture properties than Alloy 304.
Nickel 201 Ferrule Fittings particularly might also be considered for exposures where sensitization and inter – granular corrosion are concerns.Nickel 201 Double Ferrule Fittings is a columbium (niobium) / tantalum stabilized austenitic chromium – nickel stainless steel which was developed to provide an 18 / 8 type alloy with improved inter – granular – corrosion resistance.
Ni 201 Tube Fittings has a slightly improved corrosion resistance over other alloys of stainless steel in strongly oxidizing environments as a result of the addition of columbium (niobium) and tantalum.Ni 201 Compression Fittings was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C).
Sachiya Steel International is a Leading Manufacturer And Exporter of Nickel Alloy 200 Tube to Union Fittings to the valued customers.
With Nickel 200 Compression Fittings (UNS N02200), the restrictions are combined into a single dual chemistry which results in a single alloy with the best characteristics of both.
Nickel 200 Tube Fittings is ferromagnetic and has relatively low electrical resistivity.
Nickel 200 Ferrule Fittings is used in caustic solutions, food handling equipment, and general corrosion – resistant parts and structures.
Nickel 200 Double Ferrule Fittings has a low annealed hardness and very low work – hardening rate.Meanwhile, these Nickel 200 Union Fittings are also being offered in different sizes and shapes to our customers.
With its high metal content, Alloy 200 Compression Fittings unsullied offers smart corrosion resistance to extend warmth properties.
Sachiya Steel International is one of the prominent Manufacture and Exporter of quality Nickel Alloy 200 Tube to Female Pipes, which is used in the section of Alkylation units in direct contact with concentrated hydrofluoric acid.
Nickel 200 Tube Fittings can easily be welded by gas – tungsten arc, gas metal arc or shielded metal arc processes using appropriate filler metals.
The nickel and copper contents of Nickel 200 Compression Tube Fittings were in the approximate ratio which is now formally specified for the alloy.Nickel 200 Female Connector Fittings is a precipitation – harden able nickel – copper alloy that combines high strength, corrosion resistance and non – magnetic properties.
There is no need for post weld heat treatment in Nickel 200 Compression Fittings, however, thorough cleaning after welding is critical for optimum corrosion resistance, otherwise there is the risk of contamination and embrittlement.
Like most other nickel alloys, Nickel 200 Ferrule Tube Fittings is typically tough to machine and will work harden.Nickel 200 Double Ferrule Tube Fittings has excellent results which can be obtained if you make the correct choices for tooling and machining.
Alloy 200 Female Connector Fittings is a solid – solution binary alloy, which can be readily joined and fabricated.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Cupro Nickel 70 Tube to Male Fittings, which contain a unique summary of data relating to the physical and mechanical properties of the materials and low, ambient and elevated temperatures which is not available elsewhere.
The alloying elements in Copper Nickel 70 / 30 Tube Fittings do not get homogenized even by repeated thermal and mechanical treatments.
Available in various sizes, thicknesses and specifications, Copper Nickel 70 / 30 Compression Fittings are largely used in various industries.Copper Nickel 70 / 30 Male Connector Fittings are amongst the most necessary materials needed to provide the means to keep homes, commerce and industry running.
Backed by latest technologies and dexterous workforce, we are able to manufacture, supply and export an impeccable gamut of Copper Nickel 70 / 30 Ferrule Fittings, which is also available in customized sizes and shapes for our esteemed clients.We are one of the leading manufacturers, exporters and suppliers of a premium quality assortment of Copper Nickel 70 / 30 Double Ferrule Fittings, is stronger than the more common copper nickel 70/30 and is able to withstand corrosion at higher velocities in marine applications, making it the favorable choice in submarine systems.
In desalination plants, Copper Nickel 70 / 30 Compression Tube Fittings are used in brine heaters, heat rejection and recovery, and in evaporator tubing.Cupro Nickel 70/30 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Nickel, 300/1000/3000PSI for Brass Cu-Ni 70/30 Tube To Male Fittings Chemical Composition GradeCuMnPbNiFeZnCupro Nickel 70/3065 min1.0 max0.05 max29-33 max0.4-1.0 max1 max Cupro Nickel 70/30 Tube To Male Fittings Mechanical Properties DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation0.323 lb/in3 at 68 F2260 F50000 psi20000 psi30 % Equivalent Grades for 70/30 Cupro Nickel Ferrule Fitting Tube To Male Fittings STANDARDWERKSTOFF NR.UNSCupro Nickel 70/302.0882C71500 Cu-Ni 70/30 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry About Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.Email: [email protected] For More Information Visit Our Website: Sachiya Steel International
