Ninthore Overseas is one of the Leading Manufacturer And Exporter of Stainless Steel 304H Flanges, which is a steel alloy with a minimum of 10.5 % chromium content by mass. Our Stainless Steel 304H Slip On Flanges is notable for its corrosion resistance, and it is widely used for food handling and cutlery among many other applications. These Stainless Steel 304H Threaded Flanges does not readily corrode, rust or stain with water as ordinary steel does. However, our Stainless Steel 304H Weld Neck Flanges is not fully stain – proof in low – oxygen, high – salinity, or poor air – circulation environments.
These Stainless Steel 304H Blind Flanges is used where both the properties of steel and corrosion resistance are required. Our Stainless Steel UNS S30409 Socket Weld Flanges differs from carbon steel by the amount of chromium present. These unprotected Stainless Steel 304H Lap Joint Flanges rusts readily when exposed to air and moisture. Since iron oxide has lower density than these Stainless Steel 304H Ring Joint Type Flanges, the film expands and tends to flake and fall away.
Stainless Steel 304H Flanges | Stainless Steel 304H Flanges | Stainless Steel 304H Flanges | Stainless Steel 304H Flanges | Stainless Steel 304H Flanges | Stainless Steel 304H Flanges | Stainless Steel 304H Flanges | Stainless Steel 304H Flanges | Stainless Steel 304H Flanges
In comparison, our Stainless Steel 304H Spectacle Blind Flanges contain sufficient chromium to undergo passivation, forming an inert film of chromium oxide on the surface. The layer prevents further corrosion by blocking oxygen diffusion to the surface of these Stainless Steel 304H Spacer Flanges and stops corrosion from spreading into the bulk of the metal.
|
Stainless Steel 304H Pipe Flanges Specifications
|
||
| Specifications | : | ASTM A182 / ASME SA182 |
| Size | : | 1/2″ (15 NB) to 48″ (1200NB) |
| Standards |
: | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Class / Pressure | : | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Standard | : | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 304H | 0.10 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 18 – 20 | – | 8 – 10.5 | – |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 304H | 1.4301 | S30409 | – | – | – | – | – |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Ninthore Overseas is the fastest growing name in the metal industry. We provide a wide range of Steel products ranging from Sheets, Plates, Flanges, and Fittings which are of high quality.
Email: [email protected]
For More Information Visit Our Website: Ninthore Overseas
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 304H Round Bar, which is a nickel – molybdenum – chromium super – alloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments.
Stainless Steel 304H Square Bars has outstanding high-temperature stability, and has excellent resistance to stress-corrosion cracking and oxidizing atmospheres up to 1040 Degree C. Stainless Steel 304H Flat Bars has exceptional resistance to a wide variety of chemical process environments, including hot contaminated mineral acids, solvents, chlorine and chlorine contaminated media (organic and inorganic), formic and acetic acids, acetic anhydride, and seawater and brine solutions.The high nickel and molybdenum contents make Stainless Steel 304H Threaded Bars especially resistant to pitting and crevice corrosion in reducing environments while chromium conveys resistance to oxidizing media.
The carbon content in Stainless Steel 304H Hollow Bars minimizes carbide precipitation during welding to maintain corrosion resistance in as – welded structures.
Stainless Steel 304H Hexagonal Bars is resistant to the formation of grain boundary precipitates in the weld heat – affected zone, thus making it suitable for most chemical process application in an as welded condition.Stainless Steel 304H Round Bar | Stainless Steel 304H Round Bar | Stainless Steel 304H Round Bar | Stainless Steel 304H Round Bar | Stainless Steel 304H Round Bar | Stainless Steel 304H Round Bar | Stainless Steel 304H Round Bar | Stainless Steel 304H Round Bar | Stainless Steel 304H Round Bar | Stainless Steel 304H Round BarAlthough there are several variations, Stainless Steel 304H Triangular Bars is by far the most widely used.
SS 304H Bars is widely used in the most severe environments such as chemical processing, pollution control, pulp and paper production, industrial and municipal waste treatment, and recovery of sour natural gas.SS 304H Round Bar SpecificationsSpecifications:ASTM A276, ASME SA276 / ASTM A479 ASME SA479Dimensions:EN, DIN, JIS, ASTM, BS, ASME, AISISS 304H Round Bars:Outside Diameter in the range of 4mm to 500mmSS 304H Bright Bars:Outside Diameter in the range of 4mm to 100mmSS 304H Hex Bars:18mm – 57mm (11/16″ to 2-3/4″)SS 304H Square Bars:18mm – 47mm (11/16″ to 1-3/4″)SS 304H Flat Bars:1/2” to 10” in thickness range of 2mm to 150mm,Finish:Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA FinishLength:1 to 6 Meters, Custom Cut LengthsForm:Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.304H Stainless Steel Round Bar Chemical CompositionGradeCMnSiPSCrMoNiNSS 304H0.10 max2 max0.75 max0.045 max0.030 max18 – 20–8 – 10.5–Stainless Steel 304H Rods Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation8.0 g/cm31400 °C (2550 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20540 %Equivalent Grades for 304H Stainless Steel Round BarSTANDARDWERKSTOFF NR.UNSSS 304H1.4301S30409 SS 304H Round Bar Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.Email: [email protected] For More Information Visit Our Website : Sachiya Steel International
