logo
logo
Sign in

How important are roof gutters? Read below!

avatar
BTB Construction Inc.
How important are roof gutters? Read below!

Water is life! But apart from this, water can lead to destruction. Streams of water falling from the roof quickly form gullies in the soil and destroy the concrete paths. To prevent this, it is necessary to hire the best gutter installers under the eaves of the roof.

A gutter (or chute) is a narrow channel, the main function of which is to collect and direct the flow of rain and melt water into the storm sewer system.

This allows you to protect the structure from erosion, destruction of walls and foundations, saves the basement from water penetration, and, accordingly, from dampness. Often, the gutter is part of the rainwater drainage system, has a slight slope and looks more like a low side (15-20 cm), against which water, flowing from the roof, hits and then rushes to the drainpipe.

The slope angle is chosen depending on the abundance of precipitation during the year. But the most optimal angle is 15 degrees: water will not overflow over the edge of the tray, even if heavy rain or snow falls out for the area. Most often you can find gutters with a semi-circular section, but there are also rectangular ones. The gutters are made of various materials: cast iron, steel or Aluminum with a polymer coating, galvanized steel, copper, brass, zinc, plastic and stone. The most popular in the field of rainwater drainage are PVC gutters. It is about such, plastic, gutters that we will talk about. So before hiring best gutter installers, tell them about your need.

Installing the gutter

In terms of strength, high requirements are imposed on gutters, since they must withstand loads when melted snow or ice comes off the roof. At present, technologies make it possible to produce high-strength plastic, which puts products from this material on a par with those made from metal.

It is recommended to leave a minimum distance of 5 cm from the end of the tile to the front of the gutter. We can consider that the 1% to 2% fall is enough for the water to follow its course directly at the gutter's water outlet.

How are the gutters spliced?                                                       

The length of the gutters is made to measure up to 6 meters and in many cases, depending on the size of the roof, it is necessary to make splices so that water can be collected along the entire length of the roof.

The splice of the gutters must cross each other from 15cm to 25cm, depending on the fit. It is mandatory that you use a silicone sealant to avoid leaks in the middle of the gutters. Ideally they are fixed with a pop rivet rather than self-drilling screws, as the rivet has a more discreet appearance, making the seam almost imperceptible.

Conclusion

In addition, the gutters are moulded channels designed to capture rainwater that runs from the roofs. In addition to protecting the base of its work and painting, it does away with splashing water on balconies and garages, preventing soil erosion, among others. So contact with the best gutter installers near me and install soon.

collect
0
avatar
BTB Construction Inc.
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more