With the HP Envy 4520 printer, you can print, copy, and scan documents. It has a 100-sheet input tray and can print in both Duplex and Borderless modes simultaneously. It prints black at a speed of 9.5 pages per minute and color at a pace of 6.8 pages per minute in black.
With this printer, you can print at a resolution of 4800 x 1200 dots per inch (dpi). 8.5 x 14 inches is the largest print size this printer can handle.” This printer also features a scan resolution of 1200 x 2400 dpi, which is relatively high for a laser printer. “LCD with a single touchscreen,” according to the printer’s 2.2 ratings. You have two options for connecting your HP Envy 4520 printer to a computer: a wired or wireless network.
Detailed instructions for configuring an HP Envy 4520
- The following are the procedures to be followed to configure your HP Envy 4520 printer:
- Take the new HP Envy 4520 printer out of the box and set it aside.
- Then, one by one, remove the printer covers from the printer.
- Check that your envy printer is close to a power outlet before proceeding.
- It is necessary to utilize a USB cable to connect the printer to the power outlet.
- Before switching on the printer, you must first turn on the power outlet.
- Please navigate to the printer’s settings after it has been turned on and started printing.
- Afterward, make the necessary adjustments so that you may have access to the cartridge slots.
- Replace the ink cartridges in their proper places on the printer.
- Insert the required number of sheets into the printer’s input tray.
- Create a wireless network between the computer and printer to share files and printing settings.
- Download and install the required driver software.
- To confirm that the HP Envy 4520 setup is correct, print a piece of paper.