What is Servo Voltage Stabilizers? Explain its Importance and Advantages.

Before diving in, our organization wants to apprise you that since 1983, Jindal’s has been one of the prominent manufacturers of servo voltage stabilizers, transformers, and silicon-power rectifiers. Macroplast Transformers Voltage Controller has been helping the industry overcome the problem of voltage fluctuation and equipment failure for the last four decades. Macroplast Transformers is one of the leading Servo Voltage Stabilizers Manufacturers & Suppliers in India.

Macroplast Transformers Stabilizer’s Overview:

The main phenomenon of the Macroplast Transformer Stabilizer is to maintain your voltage variation and provide a constant voltage for equipment with an accuracy of 0.5 to 1.0 percent.

Unbalanced Voltage: Industries increased the amount of this type of issue as a result of a shared transformer from which so many users take electricity.

High Voltage or Surges: Surges might be generated by the disconnection of large loads, an increase in the voltage at generating plant, atmospheric events, units located close to the start of a supply line, etc.

Low voltage Or Sags: It may be caused due to undersized distribution lines, a connection of large loads to the network, ground faults, units located towards the end of a long supply line, etc.

The occurrence of the above phenomenon depends on the cause and is not easily predictable. Broadly, the voltage is low during the day and high during the night. Furthermore, on holiday peak hours, rainy days, and when the commercial or agricultural load is switched off, the voltage rises quite sharply.

Importance of a Three-Phase Servo Voltage Stabilizer:

Let’s use the human body as an example. To function properly, our body must keep its temperature at 98.4 degrees Fahrenheit. One or more body parts may keep on deteriorating even with a slight rise or fall in body temperature.

Similarly to this, the majority of electrical equipment needs a consistent voltage source of 400 volts to operate effectively and survive longer. Electric motors use a lot of power when the voltage is high or low, which leads to severe power losses and the early breakdown of the motors. Similar to this, bulbs, tubes, and luminaries may only last 10% as long as usual at high voltage and may use up to 40% more electricity.

Advantages of a Three-Phase Macroplast Transformer Stabilizer:

1. Up to 80% reduction in the failure rate of electrical equipment

2. Energy-saving up to 10% (up to 30% on lighting load)

3. Reduction in MDI

4. Improvement in Power factor

5. Uniform quality of end products

6. Improves Productivity of the plant

7. Depreciation at 40% as per the Income Tax Act (in India), being an energy-saving device.

8. Improve the duration or life period of your equipment.