logo
logo
Sign in

Troubleshooting Guide: Front Load Washing Machine Leaking from the Bottom.

avatar
Bharat sharma
Troubleshooting Guide: Front Load Washing Machine Leaking from the Bottom.

Not many things are as troublesome and irritating as a leak in your Washing Machine. If you’ve come across one, or ever do – it can halt your wash cycles and leave you with a pile of dirty laundry. This blog will help you understand the causes and what you can do to fix it.

Potential Causes of a Washing Machine Leak.

There are many reasons that can cause a leak in your washing machine, however, there are some common ones. These issues might be fixed easily or require a professional inspection and service. For severe issues, you might even need a replacement – however, the best professionals can make things work.

Let’s look at these causes below:

A fault with the Water Hose

The external water hose might be the culprit all along. Therefore, before you go ahead and check anything else – inspect that this hose isn’t loose or punctured. In either case, you can fix this easily by fitting it properly or replacing it with a new one, which you can find at any hardware store.  

Disconnected Drainage Pipe

Sometimes, due to bad positioning or excess pressure, the drainage pipe that’s used to remove dirty water might disconnect. This might cause water to leak and collect at the bottom of your machine. This is easily identifiable after a wash cycle, as the water will look muddy.

If not disconnected, a loose seal or puncture in this pipe can cause this leak too. You can  

Water Pump

Another common cause of a washing machine leak is a fault with the Water Pump. This is the component that circulates water within the machine. This leak might be caused by a puncture in the pump or by dirt and dust clogging it.

In either case, you need to consult a repair service as this requires disassembly and hefty repair work. The right technician will be able to get things working again. However, in extreme cases – you might need a replacement.

Door Seal

In a front-load washing machine, a water leak might be caused due to a problem with the door seal or gasket. This might be a loose seal, a puncture, or other forms of damage. To fix this, you’ll need to replace this door seal with a new one. You can find them online and at select hardware stores.

To prevent such damage from occurring, you can clean the door gasket regularly – and ensure that you close the door carefully.

Broken Drum

There might be a puncture in the drum of your washing machine, caused by a foreign object in the wash cycle. This is hard to fix and might even require a replacement. However, with the right professionals doing the washing machine servicing, your unit will be as good as new.

Consult a Washing Machine Repair service.

Some of these problems are minor ones that you can fix yourself. However, the other ones are signs of major damage. If left unattended, these might be beyond repair. This makes it crucial to avail the best washing machine repair service, which will allow you to increase the lifespan of your machine. 


collect
0
avatar
Bharat sharma
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more