1. Before starting the organic fertilizer equipment: because the components of the new equipment have not been run in, the equipment needs to be heated up for the first time when starting, and the general requirement is 40-50 minutes. For specific operation, first raise the temperature to pull the triangle belt of the motor by hand until free, and then pull the motor continuously 8-10 times according to the normal working options. Let's continue to heat up for about 10 minutes.2, after the boot temperature control: before the boot we have carried out a preliminary temperature control of organic fertilizer equipment, organic fertilizer production line in the production process of the material treatment, is determined by the characteristics of the material itself, so, after the boot also need to continue heating, because the normal production needs to continue to add heat; Adjust different temperatures according to different properties of plastics.
3, organic fertilizer production line normal work: normal work, machine temperature to maintain stable, do not fluctuate high and low. Near the vent hole, until the head part of the temperature to keep about 200℃. At this temperature, it is generally possible to have a good processing for most materials.
4. Stop the organic fertilizer production line: first of all, the power supply of the main engine should be cut off, and the head wire plug (with a wrench) of the equipment must be removed. Preheat separately before next use. When installing, be sure to pay attention to whether the host is perpendicular to the ground. After installation, first check whether the screws of the machine are loose and whether the door air box of the main engine compartment is tight. If they are loose, please strengthen them to avoid accidents.
Rust is a problem often encountered by the organic fertilizer production equipment, especially in rainy days.
Although the machine is not exposed to rain, it will still find rust when it is used later.
Let's explain how to prevent the fertilizer facilities from rusting in rainy days.There is more rain in autumn.
In rainy season, people will store the organic fertilizer equipment in the designated place as usual, but when it is reused after rainy day, it will be found that the organic fertilizer equipment is rusty, some mechanical parts are aging, and some parts are wet.
They are not well preserved, easy to rust and shorten the service life.
The machine should be painted with antirust paint and stored in a ventilated and dry place.2.
Taking the disc granulator as the core granulation equipment, the organic waste is processed into organic fertilizer.
Send the treated sludge (organic waste, industrial sludge, etc.)
and proper amount of qualified raw materials such as nitrogen, phosphorus and potassium into the raw material mixer according to the proportion and mix them evenly.2.
It is transported to the feeder, and the evenly mixed material is added to the rotating disc of the disc granulator through the continuous rotation of the disc.3.
The rotating disc and its edge produce friction and centrifugal effect on the material, which makes the material move in a circumferential direction, and the powder particles rub and squeeze each other, and gradually agglomerate into a ball.
When the gravity and centrifugal force increase enough to overcome the friction between particles, they will be thrown out of the disk, and the smaller particles will still stay in the disk and continue to gather fine particles.4.
There are many sawdust sources in many places, but the pile of sawdust brings great pressure to the environment, especially when the wind blows, the sawdust flying all over the sky has a great impact on the local environment.
The fermented sawdust can be used as nutrient soil ingredients for nursery stock, flower matrix, organic fertilizer, crude protein feed for low animals, etc.It is difficult to ferment in natural accumulation and the fermentation time is very long.
Using Huaqiang organic fertilizer production equipment can realize industrial assembly line processing, and sawdust can be fermented in about 20 days.
Mix and dilute the fermentation agent with rice bran or wheat bran, stir evenly for standby.3.
It is very important to control the moisture content of sawdust by adjusting the moisture content of sawdust to about 65% and adding fresh feces or urea water during the adjustment.4.
Under normal temperature, the temperature of fermentation pile can reach above 50 ℃ on the second day and above 65-70 ℃ on the third day.
