logo
logo
Sign in

How to solve the headache of RTK host problem: III?

avatar
hi target
How to solve the headache of RTK host problem: III?

At the beginning of the article, we need to say sorry to everyone, because in the original plan, we will explain the solution to the host problem during the RTK rover setup process in this article. During the writing process, it was found that the solution of the RTK rover was basically the same as the solution of the RTK base station in the previous article, so we did not describe the solution of the RTK rover in detail. I believe that everyone will solve the RTK GPS problem easily after studying the content of the previous article.

Additional point:

What needs to be reminded here is that in radio mode, the coverage range of the general external radio is less than 20km, and the coverage of the built-in radio is less than 5km. The specific situation depends on the actual area and terrain.

One more tip:

If your receiver has an abnormal voice broadcast, you can troubleshoot and solve the problem from the following aspects.

In the external radio mode, check whether the external radio antenna is too close to the host and cause interference. We recommend that the transmitting antenna need to be at least two meters away from the main unit; in the built-in radio mode, check whether an extension pole is used to isolate the base of the tripod and the main unit (the built-in radio antenna cannot be in contact with the metal object on the base or the tripod), Thereby reducing the interference of metal objects on radio transmission.

If necessary, you can remove the battery of the main unit, place it on a metal object (to discharge static electricity), then reinstall it and turn it on.

That’s all.

Learn more about RTK solution: https://www.satlab.com.se/product_category/gnss/

collect
0
avatar
hi target
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more