Sachiya Steel International is one of the well-known exporting houses of high quality Stainless Steel 317 Nipple, which has excellent resistance to a wide variety of corrosive media. Stainless Steel 317 Hexagon Reducing Nipple has reasonable resistance to salt water in cold southern waters but is unlikely to be successful in warmer tropical waters.
Overall the corrosion resistance of Stainless Steel 317 Hexagon Nipple is approximately the same as or slightly below that of Grade 304. Performance of SS 317 One End Threaded Nipple is best with a smooth surface finish, in the hardened and tempered condition. Heat this Stainless Steel 317 Both End Threaded Nipple up to 980 Degree C – 1035 Degree C, followed by quenching in oil or air, where oil quenching is necessary for heavy sections.
Stainless Steel 317 Nipple |Stainless Steel 317 Nipple | Stainless Steel 317 Nipple |Stainless Steel 317 Nipple | Stainless Steel 317 Nipple | Stainless Steel 317 Nipple
Temper this Stainless Steel 317 Concentric Swaged Nipple at 150 Degree C – 370 Degree C to obtain a wide variety of hardness values and mechanical properties as indicated in the accompanying table. Stainless Steel 317 Eccentric Swaged Nipple resists scaling in intermittent service to 925 Degree C and in continuous service to 870 Degree C, but is generally not recommended for use in temperatures above the relevant tempering temperature, because of reduction in mechanical properties.
Welding of these 317 Stainless Steel Nipple is difficult due to the risk of cracking, where a pre – heat of 200 Degree C – 300 Degree C is recommended prior to welding.
|
Stainless Steel 317 Nipple
|
||
| Specifications | : | ASTM A182 & ASME SA182 |
| Size | : | 1/4″ to 4″ |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 317 | 0.08 max | 2 max | 1.0max | 0.045 max | 0.030 max | 18 – 20 | 3.0-4.0 | 11.0-15.0 | 57.845 min |
Sachiya Steel International is one of the prominent Manufacture and Exporter of high quality Stainless Steel 317 Angle, where high quality of raw materials is used in manufacturing these products.
The main requirement for Stainless Steel 317 Angle is that they should be corrosion resistant for a specified application or environment.
The selection of a particular Stainless Steel 317 C-Channel must initially meet the corrosion resistance requirements.
Stainless Steel 317 H-Beam is austenitic chromium – nickel steels with high strength and excellent corrosion resistance.Stainless Steel 317 I-Beam are used in fluidised bed combustors, kilns, and radiant tubes, tube hangers for petroleum refining and steam boilers, coal gasifier internal components, lead pots, thermowells, refractory anchor bolts, burners.
Additional mechanical or physical properties of Stainless Steel 317 T-Beam may also need to be considered to achieve the overall service performance requirements.
Stainless Steel 317 Chain is extensively used for conveyance of fluids intended processes involving critical high – temperature applications.Stainless Steel 317 Angle | Stainless Steel 317 Angle | Stainless Steel 317 Angle | Stainless Steel 317 Angle | Stainless Steel 317 Angle | Stainless Steel 317 Angle | Stainless Steel 317 Angle | Stainless Steel 317 Angle | Stainless Steel 317 AngleOur offered 317 Stainless Steel Angle are used in under similar service conditions in heat transfer process equipment like boilers, super heaters, heat exchangers and condensers.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of high quality Stainless Steel 317 Round Bar , which are different types of stainless steels.
when nickel is added, for instance, the austenite structure of iron is stabilized.
This crystal structure of Stainless Steel 317 Square Bars makes such steels virtually non- magnetic and less brittle at low temperatures.
Stainless Steel 317 Flat Bars have an austenitic crystalline structure, which is a face – centered cubic crystal structure.
Austenite Stainless Steel 317 Threaded Bars make up over 70 % of total stainless steel production.Stainless Steel 317 Hollow Bars contain a maximum of 0.15 % carbon, a minimum of 16 % chromium, and sufficient nickel and / or manganese to retain an austenitic structure at all temperatures from the cryogenic region to the melting point of the alloy.
For greater hardness and strength, more carbon is added in Stainless Steel 317 Hexagonal Bars.
Sachiya Steel International is one of the well-established Manufacture and Exporter of high quality Stainless Steel 317 Wire Mesh, which is used to avoid corrosion problems caused by welding.
SS 317 Hexagonal Wire Mesh exhibits great resistance to chloride pitting and crevice corrosion because of high molybdenum content and nitrogen additions, and the higher nickel content ensures better resistance to stress – corrosion cracking versus the 300 series.
The higher alloy content of super austenitic SS 317 Welding Wire Mesh makes them more expensive.Stainless Steel 317 Netting Wire Mesh is used in pressure vessels but is a low – alloy carbon steel with a chromium content of 0.5 % to 9 %.
Stainless Steel 317 Woven Wire Mesh is preferred where biocompatibility is required (such as body implants and piercings).
Stainless Steel 317 Spring Steel Wire Mesh reduces the sensitization effect (precipitation of chromium carbides at grain boundaries) caused by the high temperatures involved in welding.SS 317 Fencing Wire Mesh generally has better engineering properties than austenitic grades, but has reduced corrosion resistance, because of the lower chromium and nickel content.
317 Stainless Steel Wire Mesh are also usually less expensive, which can offer similar performance at lower cost and are preferred in certain applications.
Sachiya Steel International is one of the Leading Manufacture And Exporter of high quality Stainless Steel 317 Tube to Union, which is a typical austenitic 18 / 8 stainless steel SS, with the expansion of titanium.
Our Stainless Steel 317 Tube Fittings has a carbon content restricted to exclude the lower end of Stainless Steel 317 range, so is the grade of choice for high temperature applications.
These Stainless Steel 317 Compression Fittings have excellent toughness, even down to cryogenic temperatures, although other grades are normally used in sub – zero environments.
Our Stainless Steel 317 Union Tube Fittings comprises of 11 % to 15 % nickel and 18 % to 20 % chromium.These Stainless Steel 317 Ferrule Fittings is molybdenum comportment austenitic stainless steel which is similar to grade 316, be that as it may, by method for higher molybdenum substance.
Our Stainless Steel 317 Double Ferrule Fittings provides higher creep, tensile strength, and stress – to – rupture, at high temperatures than regular stainless steels.
These 317 Stainless Steel Union Fittings is a low carbon grade that offers imperviousness to sharpening, all through welding and other techniques.Stainless Steel 317 Tube to Union | Stainless Steel 317 Tube to Union | Stainless Steel 317 Tube to Union | Stainless Steel 317 Tube to Union | Stainless Steel 317 Tube to Union | Stainless Steel 317 Tube to UnionOur 317 Stainless Steel Tube Fittings i has excellent forming and welding qualities, and the addition of columbium and tantalum helps for exceptional inter – granular corrosion resistance.
