Acrylics are the new attraction of today’s time, they can be converted into plenty of things that can make our house look magnificent and attractive. Most of the people today are using acrylic for making key chains, lights, photo frames and many other acrylic products. Now, you can purchase acrylic blanks for yourself and then make anything you like on your own. Adding glitter to it is one of the most attractive things to do with acrylic blanks. In this article, we will inform you about how to glitter an acrylic blank step by step. So, without much ado, let's hop on to the article.
Instructions to add glitter in an acrylic blank?
To enhance the look of your acrylic blank, you can put glitter to it or purchase a one with glitter on it by the best acrylic company Dubai. Adding glitter can add volume to your acrylic blank, although a normal vinyl on the blank is perfect, but it's good to have this extra choice of adding glitter.
First let’s have a look at some of the supplies that are required to glitter an acrylic blank:
- Acrylic Blanks
- Good quality glitter
- PVA Glue
- Foam brush for applying the glitter
- Something to stick the glitter like Mod Podge
- Adhesive Vinyl can also be used
Step wise instruction to glitter an acrylic bank
Step 1: The first thing you have to do is eliminate the covered film from one part of the acrylic blank. These films protects the surface of the blanks from facing any scratches
Step 2: If you are using adhesive vinyl, then that is the foremost thing which you have to do. Mirror the design so that it can be placed on the back of the blank. Place carefully, so that it’s in the center, you can take the assistance of a ruler to do that. It can be a little tough to direct, as it is not visible through the other side, which is why placing it in the right position with complete attention is integral. As soon as you have got it in the right place, the vinyl will stick easily.
Step 3: Then, with the assistance of a brush, put a narrow layer of POV Glue on the blank. You have to keep it very light, otherwise there will be chances of it to dry unevenly and leave visible white spots.
Step 4: Then, spread the glitter over the acrylic blank. You have to ensure that each and every part is entirely covered. Do not fret about using excessive glitter, as you can always save the extra leftover.
Step 5: After the previous step, you have to easily pick up the blank by its edges and then tap there allowing the leftover glitter to fall and collect the leftover in a container.
Step 6: Then allow the glitter to dry. The instructions in the POV glue suggest waiting for 20-25 minutes.
Step 7: After waiting for 20 minutes, it is time to add another coat of POV glue and glitter. This one will get a little thicker, as it has glitter under it. It is completely fine, but try your best to not apply extra in this coating. After applying glitter, you have to wait for about 40 minutes
Step 8: After the layer gets dried, fasten the glitter with epoxy. It will provide an even and smooth surface. But it is not that easy to apply epoxy. Epoxy goes with mixing an epoxy resin and a toughening agent. If you have not made the correct measurements, epoxy will not cure perfectly and will feel sticky.
You can follow one hack by taking two paper cups and then fill them up to the brim and then combine them in a silicon cup, as it works well with epoxy. Blend it perfectly using an ice-cream stick and then apply it to the back of the blank with the same. As epoxy can be a little harmful, wear gloves to be safe.
Step 9: After adding the layer of epoxy, allow it to dry. Check the instructions present in the bottle to know how long you have to wait. Usually, it takes around a day to get totally hardened. And, that’s it you have got yourself a glittered acrylic blank.
After following all these steps, you will have yourself a glittered acrylic blank. If you do not want to create it yourself and wish to purchase some good acrylic products, one with a good finishing and of good quality, then you can opt for the best Acrylic Fabricators in Dubai.
Professional Acrylic LLC is a Dubai based Acrylic company which deals in Acrylic Fabrication, Acrylic Moulding and Bending, Acrylic Safety Guard, Acrylic Stand Supplier in UAE, Acrylic Display Stand, Acrylic Bending and Bonding, Acrylic Engraving, Acrylic Custom Painting, Acrylic Sign Boards.
For more information visit our website or call us!
Pleasant Plastic provides end-to-end product design, engineering, tooling, and acrylic manufacturers.
We are the best acrylic product designer in Dubai, UAE.
We take pride not only in the efficiency of our job but in delivering orders from our customers on time.
You can see that Pleasant Acrylic is famous for Acrylic Bending and Molding Dubai.
To know more details regarding Acrylic fabrication Dubai, Acrylic Painting Services in Dubai, Acrylic Design UAE, Acrylic Polishing, Acrylic Etching visit our site.
