Stainless Steel 321 Wire Mesh Manufacture

Sachiya Steel International is one of the prominent Manufacture of high quality Stainless Steel 310H Wire Mesh, which Good resistance to mildly corrosive atmospheres, but significantly less than Grade 310H due to the Sulphur addition; the sulphide inclusions act as pit initiation sites.

Grade 310 should not be exposed to marine or other similar environments, as these will result in rapid pitting corrosion.

Because the sulphide inclusions in 310 are primarily aligned along the rolling direction the corrosion resistance is particularly reduced in cross-sections.It is like other common austenitic stainless steels, is subject to stress corrosion cracking in chloride containing environments above about 50°C.

Good oxidation resistance in intermittent service to 760°C and in continuous service to 870°C.

Welds must be annealed for maximum corrosion resistance, but even then poor mechanical and corrosion properties will result.For ultra-high machining rates there are also available special grade variants such as Ugima 303UX.

This includes copper to reduce the work hardening rate, in addition to the usual high Sulphur and Improved Machinability steel making practices.

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of a wide range of Stainless Steel 321 Round Bar, which has high carbon (.04 – 10) for better high temperature creep properties.

If subsequently used in service at room temperature while some slight precipitation of chromium carbide can occur in Stainless Steel 321 Round Bars over an extended period this will generally have little effect on corrosion resistance.

Stainless Steel 321H Round Bars provides excellent resistance to oxidation and corrosion and possesses good creep strength.Stainless Steel 321 Square Bars performs well in the 425 – 900 °C range, and particularly where subsequent aqueous corrosive conditions are present.

Stainless Steel 321H Flat Bars is utilized in chloride or fluoride free caustic solutions at moderate temperatures.

Stainless Steel 321 Threaded Bars was developed for use in the chromium carbide precipitation range of 1800 – 1500°F (427 – 816°C) where un-stabilized alloys such as 304 are subject to intergranular attack.Stainless Steel 321 Round Bar | Stainless Steel 321 Round Bar | Stainless Steel 321 Round Bar | Stainless Steel 321 Round Bar | Stainless Steel 321 Round Bar | Stainless Steel 321 Round Bar | Stainless Steel 321 Round Bar | Stainless Steel 321 Round Bar | Stainless Steel 321 Round Bar | Stainless Steel 321 Round Bar | Stainless Steel 321 Round BarPickling of the previously brushed seam area in Stainless Steel 321H Hollow Bars is carried out by dipping and spraying, however, often pickling pastes or solutions are used, where after pickling a careful flushing with water has to be done.

Stainless Steel 321 Hexagonal Bars has excellent corrosion resistance in a wide variety of corrosive media, along with high creep & stress rupture properties.

Sachiya Steel International is a Leading Manufacture And Exporter For a wide range of Stainless Steel 321 Tube to Union, which has better high temperature properties than 304 or 304L.

When comparing the chemical structure of Stainless Steel 321 Compression Fittings against standard austenitic grades such as SS 304 / SS 316 the main separating factor is the Titanium content, which is used as a stabilizing element allowing the material to operate at a higher temperature range.

Stainless Steel 321H Compression Fittings should be neglected to mark within the welding seam zone with oleaginous bolts or temperature indicating crayons.Titanium in Stainless Steel 321 Tube Fittings preferentially reacts with carbon in the steel and prevents precipitation of chromium carbides at the grain boundaries, thus preserving corrosion-resistant properties by preventing depletion of chromium near the grain boundaries during exposure within critical temperature range.

Austenitic Stainless Steel 321H Tube Fittings during annealing are heated to fairly high temperatures, typically 1050 Degree C – 1100 Degree C to ensure that all chromium carbides present are dissolved and all of the chromium is taken into solution in the austenite.Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to Union  | Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to UnionStainless Steel 321 Ferrule Fittings is considered resistant to potable water with up to about 200 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C.

Stainless Steel 321H Double Ferrule Fittings resists polythionic acid stress corrosion cracking in hydrocarbon service.Stainless Steel 321/321H Tube to Union SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for BrassSS 321/321H Tube To Union Chemical CompositionGradeCMnSiPSCrNNiTiSS 3210.08 max2.0 max1.0 max0.045 max0.030 max17.00 – 19.000.10 max9.00 – 12.005(C+N) – 0.70 maxSS 321H0.04 – 0.102.0 max1.0 max0.045 max0.030 max17.00 – 19.000.10 max9.00 – 12.004(C+N) – 0.70 maxStainless Steel 321/321H Tube To Union Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation8.0 g/cm31457 °C (2650 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20535 %Equivalent Grades for 321/321H Stainless Steel Ferrule Fitting Tube To UnionSTANDARDWERKSTOFF NR.UNSJISENSS 3211.4541S32100SUS 321X6CrNiTi18-10SS 321H1.4878S32109SUS 321HX12CrNiTi18-9 SS 321/321H Tube To Union Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.

We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.

Sachiya Steel International is a prominent Manufacture, supplier, exporter and manufacturer of Stainless Steel 321 Angle, Channel, Beam, Chain, which has some great features to offer such as Accurate dimension, Excellent performance, Long service life, Reasonable price, Low maintenance, Optimality, Ease of fabrication, and so on.

The procuring agents employed with us ensure that our experts use only quality raw material for the fabrication of our Stainless Steel 321 Angle.We also offer these in different grades and specifications, where this Stainless Steel 321H C Channel is often used in requiring low tensile strength, components of small cross section, as well as heavy forging in the normalized condition for automotive & general engineering such as presses & Punches Parts, axles, clutch shafts, Piston rods & gear rods.

Our Stainless Steel 321 H Beam is widely acclaimed in the industry for their long lasting nature, robust construction, dimensional accuracy, high tensile strength and rust free nature.Stainless Steel 321 Angle | Stainless Steel 321 Angle | Stainless Steel 321 Angle | Stainless Steel 321 Angle | Stainless Steel 321 Angle | Stainless Steel 321 Angle | Stainless Steel 321 Angle | Stainless Steel 321 Angle | Stainless Steel 321 Angle | Stainless Steel 321 AngleWe have the widest range of these Stainless Steel 321H I Beam in one roof manufactured under strict quality norms, which are further manufactured using superlative quality raw materials.

Moreover, our ability to fulfill emergent of bulk orders of our Stainless Steel 321 T Beam within the specified time has enabled us to serve huge clientele.

Due to their number of advantages, this Stainless Steel 321H Chain is acknowledged in various heat – testing equipment’s.

SS 321/321H Angle, Channel, Beam, Chain SpecificationsSpecifications:ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705MDimensions:EN, DIN, JIS, ASTM, BS, ASME, AISISS 321 Angle:5mm to 9mmSS 321 Channel:40mm*20mm~300mm*300mmSS 321 Beam:3″ thru 12.31″SS 321 Chain:1/8 inch – 1/2 inch DiameterThickness:3.0mm – 120mmLength:3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut SizesType:Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain 321/321H Stainless Steel Angle, Channel, Beam, Chain Chemical CompositionGradeCMnSiPSCrNNiTiSS 3210.08 max2.0 max1.0 max0.045 max0.030 max17.00 – 19.000.10 max9.00 – 12.005(C+N) – 0.70 maxSS 321H0.04 – 0.102.0 max1.0 max0.045 max0.030 max17.00 – 19.000.10 max9.00 – 12.004(C+N) – 0.70 maxStainless Steel 321/321H Angle, Channel, Beam, Chain Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation8.0 g/cm31457 °C (2650 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20535 %Equivalent Grades for 321/321H Stainless Steel Angle, Channel, Beam, ChainSTANDARDWERKSTOFF NR.UNSJISENSS 3211.4541S32100SUS 321X6CrNiTi18-10SS 321H1.4878S32109SUS 321HX12CrNiTi18-9 SS 321/321H Angle, Channel, Beam, Chain Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry

Stainless Steel Wire Mesh Manufacturers in Delhi - Find Stainless Steel Wire Mesh panels, suppliers, manufacturers, dealers & exporters company in India.

Get contact details - 098102 53450.