Sachiya Steel International offers a wide quality range of Incoloy 800 Tube to Female Pipes, which has excellent creep strength at temperatures above 1290 Degree F (700 Degree C). Incoloy 800 Tube Fittings is often used in Ethylene furnace quench boilers, Hydrocarbon cracking, Valves, fittings and other components exposed to corrosive attack from 1100 Degree F – 1800 Degree F.
Incoloy 800H Tube Fittings is also used in Heat exchangers and process piping, along with Carburizing fixtures and retorts. For applications in Incoloy 800HT Tube Fittings requiring greater resistance to stress rupture and creep, especially at temperatures above 1500 Degree F (816 Degree C), 800HT are used. Machining characteristics of Incoloy 800 Compression Fittings are similar to that of iron – based alloys.
Incoloy 800 Tube to Female Pipes | Incoloy 800 Tube to Female Pipes | Incoloy 800 Tube to Female Pipes | Incoloy 800 Tube to Female Pipes | Incoloy 800 Tube to Female Pipes | Incoloy 800 Tube to Female Pipes | Incoloy 800 Tube to Female Pipes | Incoloy 800 Tube to Female Pipes | Incoloy 800 Tube to Female Pipes | Incoloy 800 Tube to Female Pipes
For high temperature applications requiring optimum rupture and creep properties, Incoloy 800H Compression Fittings are used. Incoloy 800HT Compression Fittings has always been known to contain properties for high temp strength and resistance to carburization, oxidation and other high temp corrosion.
These additions allow Incoloy 800 Female Connector Fittings to adapt to the needs of a variety of industries and enable leading metal companies to offer a range of Incoloy shapes and designs. Alloy 800 Tube Fittings is used in the heat processing equipment, industrial incinerators, chemical processing industries etc. In hot or concentrated solutions, rates of Alloy 800 Compression Fittings are usually too high for reasonable service life.
Incoloy 800/800H/800HT Tube to Female Pipes Specifications
|
||
Specifications | : | ASTM B366 ASME SB 366 |
Size | : | OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″ |
Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
Pressure Rating |
: | 3000 – 800/800H/800HT0 PSI |
Applicable Temperature |
: | 150-400 C |
Type |
: | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting. |
Grade | C | Mn | Si | Fe | S | Cr | Al-Ti | Ni | |
800 | min. | – | – | – | 39.5 | – | 19.0 | 0.15 | 30.0 |
max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 0.60 | 35.0 | |
800H | min. | 0.05 | – | – | 39.5 | – | 19.0 | 0.15 | 30.0 |
max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 0.60 | 35.0 | |
800HT | min. | 0.06 | – | – | 39.5 | – | 19.0 | 0.85/0.25 | 30.0 |
max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 1.20/0.60 | 35.0 |
Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | ||||
800-H-HT | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa –205 | 30 | – | – |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
Incoloy 800 | 1.4876 | N08800 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | X10NiCrAlTi32-20 | XH32T |
Incoloy 800H | 1.4958 / 1.4876 | N08810 | NCF 800H | NA 15(H) | ЭИ670 | Z8NC33-21 | X5NiCrAlTi31-20 | XH32T |
Incoloy 800HT | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | – | X8NiCrAlTi32-21 | XH32T |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
For more details: |
Web: https://steeltube.co.in/ |
Phone: +91 9769056007 |
E-Mail: [email protected] |