Orbi is a WiFi system, that provides a single WiFi network for the entire home. With this, you can have one network and password, and you need to change the network when you move around your home.
What if it fails to work properly and the Orbi blinking white issue occurs unexpectedly? There could be multiple reasons, that can lead to this problem on your device.
You are struggling with Orbi blinking white and wondering how to fix this. If your answer is yes, then you reached the correct destination. Here you will be provided with a brief guide about how to fix white light on the Orbi.
Although facing problems with the Orbi router is quite common. Many users have reposted that they encountered the router blinking white light issue. But the good about Orbi blinking white is that it is curable and can be fixed in a few simple and easy steps.
However, having a sturdy and working internet connection is required, it is necessary to understand what to do in such circumstances. It is so annoying that your device loses connection due to the issue.
If you are unable to do this on your own, then the following easy and effective methods will help you out. Simply follow the below method to fix Orbi blinking white.
What are the Causes for Orbi Blinking White?
The Orbi device is a popular device, which is used to extend the coverage of the WiFi network and signal strength of the router. However, the Orbi devices may run into some problems like Orbi WiFi unstable, Orbi blinking white, and some others.
After analysis, this was found the issues are often related to the firmware. If your device has lost the power supply while firmware updates, then you may encounter a blinking white problem.
Not only firmware updates, but this issue can also occur due to a temporary OS glitch, and corrupt or damaged firmware is another possible cause for the white light on the Orbi device.
Troubleshooting Method to Fix Orbi Blinking White
Resolving the white light blinking issue in the Orbi router is not a complicated task, it is more simpler than you think. If you are unable to fix this problem on your own, then follow the method to fix Orbi blinking white.
1. Power Cycle the Orbi Router and the Satellite
By power cycling the router and the satellite, temporary glitches in the devices can be cleared. Before power cycling, ensure the proper supply is plugged into the Orbi login device and follow the below instructions.
- First, turn off the router and the satellite, and also turn off the other modem and router if any are connected.
- Then unplug all power sources from the devices and leave them ideal overnight.
- After that, plug back both the devices and power them on. Then press the reset button on the router, until the LED blinks amber.
- Now release the reset button and leave it like this only for an hour. Once done successfully, turn on the device and see if the problem is solved.
2. Re-sync the Orbi Satellite
If the above method does not fix the Orbi blinking white light problem, then try to re-sync the Orbi satellite. Here is how to re-sync the Orbi satellite.
- First, you need to ensure that the Orbi satellite and router are receiving enough power supply and are turned on.
- After that, press the sync button on the router and wait for at least a couple of minutes.
- Now press the Sync button again and see if the syncing is successful based on blinking light.
- If it blinks blue, then it means sync is successful, or if it blinks amber, then it means moving the devices closer to each other.
- The magenta light indicates the sync has failed and try again.
3. Download the Latest Firmware
The next method to fix Orbi blinking white is to download the latest firmware. As mentioned above outdated and corrupt firmware can also lead to the same problem. Below are the steps to download the latest firmware.
- Open any preferred browser and head to the download page of the Netgear website.
- Next, you have to download the latest firmware according to your requirements.
- Once you have downloaded the firmware, ensure that it matches with the router/satellite firmware.
- After that, unzip the downloaded firmware archive. The firmware is the file with the .img or .chk extension.
- At last, check whether the white light blinking issue is solved on the Orbi device.
4. Factory Reset the Orbi Devices
Another method to resolve the Orbi blinking white issue is to factory reset the device. Factory resetting will erase all the settings you made and the minor bug leading to this problem. Here are the steps to factory reset the Orbi devices.
- Before proceeding, ensure the Orbi device and router are close to the laptop or modem.
- Then turn off the router and satellite as well, unplug the router from the ethernet port, and power on it.
- After that, wait for about 5 minutes and press the reset button on the Orbi router for a minute.
- Next, hold the reset button, until the LED lights on the router start blinking amber.
- Now release the reset button and wait for a couple of minutes. Then reset the satellite as well.
Sum up
Certainly, the above method to fix Orbi blinking white light problem will help you. Follow the above steps as given to rectify the blinking white light issue.
Sometimes due to various reasons, your vehicle doesn’t function properly.
And that might be because of failed gear, broken headlights, punctured tire, and much more.
Therefore, in that case, you must look for a company that will help you troubleshoot your vehicle and fix all those issues.
