Some Windows 10 users report that their system’s screen will not turn off after a particular time. Sleep time is very important for the system’s life because it offers the PC time to rest and store power while in idle mode. If you want to get rid of this issue, you can follow this article completely.
Update The Drivers To The Newest Versions
To update the drivers to the newest versions, follow these on-screen steps by steps directions provided below:
- Go to the Windows menu on the PC.
- Afterward, right-click on it, then choose the ‘Device Manager’ via the menu.
- Then, you should extend the ‘Display adapters’ option or another option with drivers with exclamation points.
- Thereafter, select the particular driver, and right-click on it then choose the Update Driver option.
- You should select the ‘Search automatically for updated driver software’ option.
- Later, you have to wait for the installation process to finish.
- Finally, restart the system.
Modify The Sleep Settings
To modify the sleep settings, follow these on-screen steps by steps directions provided below:
- First and foremost, launch the Run accessory using Win and R buttons together over the keyboard.
- Once you see the Run prompt, input ‘control.exe powercfg.cpl,,3’ into it, then hit the OK button.
- After launching the ‘Power Options’ screen, check for the USB settings.
- You should extend the ‘USB selective suspend setting’ option.
- Thereafter, hit on the pull-down menu next to the Settings option.
- Then choose the ‘Disabled’ settings via the pull-down menu.
- In case you are enacting this over a laptop, you will notify ‘On battery and Plugged in’ settings.
- Later, you can simply turn off both these options.
- After doing that, hit the Apply and OK buttons.
Modify The Power Plan Settings
To modify the power plan settings, follow these on-screen steps by steps directions provided below:
- Go to the Windows logo and click on it on your system.
- After that, click on the Settings option.
- You should click on the System option.
- Thereafter, reach the ‘Power and Sleep’ option and select it.
- Make sure that the Sleep settings are adjusted to the preferred value.
- Navigate to the ‘Additional power settings’ option and click on it.
- You should click on the ‘Change Plan Settings’ option and nearby to the option.
- Later, click on the ‘Change advanced power settings’ option and click on it.
- Go to the ‘Power Options’ page, extend all the settings and make sure that they let the system reach the sleep mode.
10.Now, set it to the ‘Allow the computer to sleep’ option.
Detach The Devices Linked To The System
To detach the devices linked to the system, follow these on-screen steps by steps directions provided below:
1. First and foremost, detach other USB devices.
2. After that, detach the display cord via the backside.
3. You have to wait for a moment.
4. Then connect the display cord back to the system once again.
5. Later, wait and check whether it works for you.
6. You should also reach the Device Manager and turn off the ‘HID-Compliant Game controller’ option with other game controllers since those often show to trigger the problem.
Ella johnson has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry. Ella has written several technical blogs, manuals, and reviews for several renowned websites.
SOURCE: How To Fix Screen Won’t Turn Off After Specified Time On Windows 10?
VAC authentication errors are quite common with games like Counter-Strike.
VAC is a Valve games software which helps make your gaming experience better and fair.
However, at times you may be unable to play Valve games because of the VAC authentication error.
To fix this error, apply the solutions mentioned below.Reboot the SystemYou should follow the directions given below:You should shut each app and window.After that, press the Windows key.Then choose the Power icon in the Start Menu.Go to the Restart button and click on it.Reboot the Steam ClientYou should follow these directions given below:Close Steam on your device.After that, launch the Steam client once again.Thereafter choose the option of ‘Go offline’ from the context menu.Select the button of ‘Restart in offline mode.’You should choose the Steam section again and choose the option of ‘Go online’ through the context menu.Now, click on ‘Restart and go online.’Sign Out of Steam and Sign-in AgainYou need to follow the steps given below:You should launch the Steam application.Then select the Profile name.After that, choose the ‘Log out my account’ option.Once you are signed out, sign in again.In case you do not remember the password, select the option of ‘Reset Password.’Stop Service of Steam in Task ManagerFollow these steps:Hold the Windows and X keys to open the Power User menu.After that, select the Task Manager through the list.Navigate to the Processes section and choose the Steam service.Later, select the option of End Task.Now, check whether the error has been fixed or not.Remove Temporary FilesFollow these steps:Hold the Windows and R buttons to invoke the Run section.After that, input ‘%temp%’ into it and select the OK button.You should choose each item in the list by holding the ‘Ctrl + A’ keys altogether over the keyboard.Then hold the ‘Shift + Del’ keys to remove them.Later, click on the Yes button.Update the WindowsHere are the steps to follow:Open the Settings application.Select the ‘Update and Security’ option.Go to the Windows Update section.Now, choose the ‘Check for updates’ option and wait for Windows to download the latest updates, then reboot the system.We are hopeful that the fixes mentioned above will help you fix the VAC authentication error on your Windows 10 device.
Source : VAC Authentication Error on Windows 10
If your Wi-Fi is working but the wired ethernet connection is not, then you should disable the WiFi.
When Windows 10 can access both the Wi-Fi and the ethernet connection, then it prioritizes the latter.
So, if you turn off the wi-fi, you can find out if the ethernet connection is working or not.
To fix ethernet connection issues, follow the solutions mentioned below.Update the Drivers ManuallyYou should pursue these steps provided below:Navigate to the Windows icon, and right-click on it, then choose the Device Manager option.After that, select the list of Network adapters and expand it, then check if any problems are using the devices.Then reach the Ethernet card and identify it.Later right-click on it, and choose the Properties option.Once you reach the screen of Device status, it may say that the device is operating correctly.Now, in case the icon of the Ethernet controller has an exclamation point or a question mark, then install the right driver for it again.Ensure that the Connection is Turned onYou should pursue these steps provided below:Go to the Windows menu, and right-click on it, then choose the Network connections.Now, right-click on it and choose the Enable option.Check the Connection DetailsYou should pursue these steps provided below:Reach the connection of Ethernet and right-click on it, then choose the Properties option.Once you reach the screen of ‘Ethernet Properties’, select the option of ‘Internet Protocol Version 4 (TCP/IPv4)’ then twice click on it.Turn on these options: ‘Obtain DNS server address automatically’ and ‘Obtain an IP address automatically.’Launch the Internet Connection TroubleshooterYou should pursue these steps provided below:Go to the Search section.Thereafter, type and enter ‘Update and Security’.You have to choose the ‘Troubleshooter’ option.Now, choose and open the ‘Internet connection troubleshooter’ option.Check whether the connection of Ethernet is available.Finally, reboot the system and check once again.Roll Back the Network Adapter DriverYou should pursue these steps provided below:Open the Device Manager.Then select the Network adapters and choose the ‘network adapter’ option.Later, right-click on it then choose the Properties.Once you reach the Properties screen, choose the tab of Driver, and select the ‘Roll Back Driver’ option.Pursue the on-screen instructions to install an earlier version of the driver.In case the option is unavailable, that means there is no driver to roll back to.Disable the FirewallYou should pursue these steps provided below:Launch the Windows Firewall.Disable it.Now, check the Ethernet connection once again.Reset the NetworkYou should pursue these steps provided below:Reach the Settings screen, choose the ‘Network & Internet’ option, and then select the Status option.Then find the option of ‘Network reset.’Now, click on the button of ‘Reset now’ and hit the Yes button.By following the troubleshooting tips mentioned above, you will be able to fix the ethernet connection issues on your Windows 10 device.JEANNE E. WINFIELD arrived on the cyber security scene in the early 2000s when virus and malware were still new and slowly evolving.
Her longtime affair with writing with an interest in the cybersecurity industry, combined with her IT degree, has contributed to experience several aspects of security suite industry such as blogging at mcafee.com/activate.
Source : How to Fix Ethernet Connection Problems in Windows 10
Windows 10 operating system makes it easier for every user to accomplish any computing task.
Any Windows 10 user can easily customize the settings on their computer system as per their preferences.
Here, we are going to provide you with multiple techniques that you can follow to create multiple folders at the same time on your Windows 10 computer.
You can use a keyboard shortcut “Ctrl + Shift + N” for creating a set of folders.
Here, we have mentioned two different techniques, and each one includes some simple steps that you will have to follow.
After clicking the Start button, type “cmd” in the search bar and then press the enter key.
System restore is very useful to the users who have no time to restore manually.
Restore point able to help you to do your work without any condition, and save your lots of time, you waste in troubleshooting.
If Windows creates Systems Restored Points Frequently, then you have to make your Windows PC arrange for the scheduled time.How to Perform System Restore Points automaticallyWe know that Windows owned inbuilt features and settings, where users quickly set their Windows PC to restore Points, every day, or weekly in one click, however, there is also a manually setting available.
If you make another attempt, then it will be skipped automatically.
Here are the steps to do.Launched Open Registry Editor and cruise the listed keys.Double click on SystemRestorePointCreationFrequency to edit DWORD.Change the entire value 0.Always remember that Windows cant skip Creating restore point.By System Restore point methodCheckpoint-Computer -Description “TWC – Restore Point” -RestorePointtype MODIFY_SETTING (Command will be used to treat Restore point).Here are some examples of the command helps you to create a restore point.How to APPLICATION INSTALLHow To APPLICATION UNINSTALLHow To DEVICE DRIVER INSTALLHow To CANCELED OPERATIONYou can similarly create a restore point using WMIC.EXE.
here we explained how to Generate the Restore point automatically./Namespace:\\root\default Path SystemRestore Call CreateRestorePoint “Startup Restore Point”, 100, 7Create a Task in Task SchedulerIn the above task mentioned scheduler with power shell where you have to create and schedule tasks.To promote type taskschd.
Nowadays, most of the Windows 10 users are complaining that they can’t locate the button or any option to adjust the level of brightness in the Notification Center or the taskbar.
Users have to search for brightness settings in the Settings application, and it is a very lengthy process.
In order to get the brightness slider on the desktop, follow the instructions given below.Make Changes in the Device ManagerYou should follow the steps provided below:Hit the Windows and R buttons to launch the Run box.After that, insert ‘devmgmt.msc’ and hit the Enter button to launch the Device Manager.You should select the arrow icon beside the Device Manager and select the only device you locate there and right-click on it.Then select the option of Enable device, if applicable.Thereafter, click on the option of Properties and reach the Driver section.
Confirm if the Device Provider is anyone but Microsoft.
If yes, then click on UninstallGo to the Device Manager, then select the Action option and choose the option of ‘Scan for hardware changes,’ and this will look for devices without any driver, then install them again automatically.Now, verify any pop-ups or dialogs that may appear on the screen.Update the Graphic Card DriverYou should follow the steps provided below:Press the Windows and R keys to open the Run box.Thereafter, insert ‘devmgmt.msc’ and hit the Enter key to open the Device Manager.Extend the section of Display adapters and select the graphics card, then right-click on it.Go to the Uninstall Device option.You should verify any dialogs or pop-ups that may appear on the screen.Check the graphics card driver.
Insert the needed detail about the card and OS then select the Submit or Search option.Then you will see each driver on the list, and don’t forget to move down until you see the needed entry, select the name and click on the Download button.Once you see the screen of ‘Installation Options,’ select the option of ‘Custom (Advanced)’ before clicking on Next.Mark the box of ‘Perform a clean installation’ and then press the Next button to install the driver.Check if the problem has been resolved or not.By following the instructions mentioned above, you will be able to get back the missing brightness slider on your Windows 10 device.
Are you not able to download, installation, activation, and use of Windows 10 Operating System?
Contact Official Microsoft Windows 10 Support Number for instant solution.
