It is a WiFi mesh system made to give a dependable and strong connection to every room of your house. Some customers have had troubles with their Orbi system; however, most users have had a positive experience.
Orbi purple light is one such problem. If your Orbi router's purple (magenta) light is flashing, you've come to the right place for help with your network connection. There is a purple glow on the screen, and we'll figure out what it means and how to solve it. What do you think?
What's the Best Way to Fix the Purple Light on the Orbi?
There are a variety of possible causes for the Orbi purple light, but none of them necessitate a high level of technical expertise to solve.
However, if you follow some of the advice and get stuck at a certain point, you can always contact support and have them help you solve the problem. They may send someone to resolve the issue in the end. Let's begin with the easiest solutions if you've decided to continue.
Make Sure You're Connected
Even though you haven't touched or changed anything, double-checking all of the cords and connectors are still a good idea. Only when we or someone else establishes the network do we pay attention to them. While cleaning your house, you or someone else may have moved some wires, and if the connector was loose, it could pose an issue. Your pet may have tampered with the wires. Checking cables and connectors isn't tricky, but verifying that each cable has been properly attached to the relevant port is crucial.
Check your Orbi router's purple light to ensure no loose connections. To see if it's still purple, try the following.
Ensure that your modem is connected to the Orbi WAN port using an Ethernet wire. If you have a spare cable, you can try that as well.
The Orbi Router Must Be Restarted
Restarting a broken router or other device is the only way to get it working again. Just unplug the router's power cord from the wall outlet. Reconnect it after a short delay. Wait for the router to restart and check the router's status light. Fixing the purple light is a really good bet. Restarting the entire network may be necessary if the purple light on Orbi persists after a device reset.
The Orbi Network Must Be Restarted
It's critical to follow a certain procedure while reactivating your Orbi network. Take your time and follow the steps in the correct order.
- Remove the modem from the wall socket and turn it off.
- Switch off your Orbi router.
- Activate the modem by plugging it in and powering it up. Allow at least two minutes for it to start up.
- Open the Orbi router and turn it on. It will take two minutes to start up, so be patient.
- Now is a good time to check the Orbi light to see if it is on.
Inquire about Netgear Help
You may also want to check with your ISP to see if there are any issues with your Orbi router. If this is the case, contact Netgear customer service. They can do troubleshooting of the Orbi purple light.
A Few Words of Advice
We hope you can resolve the Orbi purple light issue on your own without needing assistance from your ISP or Netgear of Orbilogin.com. As you can see, the rest of the options are straightforward. There is a considerable chance that they can help you with other Orbi difficulties, so keep them in mind.
